• Particle and aerosol research
• /
• v.6 no.2
• /
• pp.51-59
• /
• 2010

ZnO quantum dots embedded in a silica matrix without agglomeration were synthesized from $TEOS:Zn(NO_3)_2$ solutions in one-step process by aerosol-gel method. It was successfully demonstrated that the size of ZnO Q-dots could be controlled from 2 to 7 mm verified by a high resolution transmission electron microscope observation. The line scanning energy dispersive X-ray spectroscopy(EDS) revealed that the Q-dots existed preferentially inside SiO2 sphere when Zn/Si < 0.5. However, the Q-dots distributed homogeneously all over the sphere when Zn/Si > 1.0. Blue-shifted UV/Vis absorption peak observation confirmed the quantum size effect on the optical properties. The photoluminescence(PL) emission peaks of the powders at room temperature were consistent with previous reports in the following aspects: 1) PL characteristics are dominated by two peaks of deep-level defect-related emissions at 2.4 - 2.8 eV, 2) the first defect-related peak at 2.4 eV was blue shifted due to the quantum size effect with decreasing the concentration of $Zn(NO_3)_2$(decreasing the size of ZnO q dots). More interestingly, the existence of surface-exposed ZnO q dots affects greatly the second defect PL peak at 2.8 eV.

• Journal of Genetic Medicine
• /
• v.4 no.2
• /
• pp.179-185
• /
• 2007

Purpose : Catecholamines are the neuro-transmitters in the sympathetic nervous system (SNS) and are activated by stress stimulus. Tyrosine hydroxylase (TH) and Dopamine-${\beta}$-Hydroxylase (DBH) are very important enzymes in the catecholamine synthesis. Corticotropin releasing hormone (CRH) is released in the process of reacting to stresses. The aim of this study is to find out what effects immobilization stresses have on the expression of TH, BDH and CRH mRNA in a rat's brains. Methods : We compare expression levels in rat's brains of TH, DBH and CRH mRNA induced by immobilization stresses between the test group and controled group. The expression levels of TH, DBH and CRH mRNA are measured by RT-PCR and the Western Blotting Analysis (WBA). Results : In brains and adrenal glands of the immobilization stress group, the expression levels of TH and DBH mRNAs are significantly two to three times higher (P<0.01), and CRH mRNAs are approximately one and a half times higher (P<0.05) than those of controlled group. Conclusion : This study suggest that the expression levels of TH, DBH and CRH mRNAs are activated by stress stimulus in a rat's brains and adrenal glands.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.1
• /
• pp.26-34
• /
• 1992

The effect of induction temperature on fermentation parameters has been investigated extensively using Escherichia coli M5248[pNKM21], a producer of recombinant human interleukin-2 (rhIL-2). In this recombinant microorganism, the gene expression of rhIL-2 is regulated by the cI857 repressor and $P_L$ promoter system. The recombinant fermentation parameters studied in this work include the cell growth, protein synthesis, cell viability, plasmid stability, $\beta$-lactamase activity, and rhIL-2 productivity. Interrelationships of such fermentation parameters have been analyzed through a quantitative assessment of the experimental data set obtained at eight different culture conditions. While the expression of rhIL-2 gene was repressed at culture temperatures below $34^\circ{C}$ with little effect on other fermentation parameters, under the conditions of rhIL-2 production $>(36~44^\circ{C})$ the cell growth, plasmid stability, and $\beta$-lactamase activity were, as induction temperature was increased, more profoundly reduced. Although the rhIL-2 content in the insoluble protein fraction was maximum at $40^\circ{C}$, total rhIL-2 production in the culture volume was found to be highest at the induction temperature of $36^\circ{C}$. This was in contrast to the previously known optimum induction temperature of the P$_{L}$ promoter system $>(40~42^\circ{C})$.Explanations for such a discrepancy have been proposed based on a product formation kinetics, and their implications have been discussed in detail.l.

• Toxicological Research
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2008

Ptdlns(4,5)$P_2$ is a key cellular phosphoinositide that localizes in separate and distinctive pools in subcellular membrane and vesicular compartments. In membranes, Ptdlns(4,5)$P_2$ acts as a precursor to second messengers and is itself a main signaling and targeting molecule. Specific subcellular localization of type I PIP kinases directed by interacting with specific targeting module differentiates Ptdlns(4,5)$P_2$ production in a spatial and temporal manner. Several lines of evidences support the idea that Ptdlns(4,5)$P_2$ is generated in very specific pools in a spatial and temporal manner or by feeding Ptdlns(4,5)$P_2$ directly to effectors. In this concept, the interaction of PIPKI isoforms with a specific targeting module to allow precise subcellular targeting modulates highly specific Ptdlns(4,5)$P_2$ synthesis and channeling overall effectors. For instance, localization of PIPKI${\gamma}$661 to focal adhesions by an interaction with talin results in spatial and temporal production of Ptdlns(4,5)$P_2$, which regulates EGF-stimulated directional cell migration. In addition, Type $I{\gamma}$ PIPK is targeted to E-cadherin in cell adherence junction and plays a role in controlling dynamics of cell adherence junction and endocytosis of E-cadherin. Characterizing how PIP kinase isoforms are regulated by interactions with their targeting modules, as well as the mechanisms by which their product, Ptdlns(4,5)$P_2$, exerts its effects on cellular signaling processes, is crucial to understand the harmonized control of numerous cellular signaling pathways. Thus, in this review the roles of the Ptdlns(4)P(5) kinases and Ptdlns(4,5)$P_2$ were described and critically reviewed in terms of regulation of the E-cadherin trafficking, cell migration, and formation of cell adherence junction which is indispensable and is tightly controlled in epithelial-to-mesenchymal transition process.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.611-616
• /
• 2010

A cobalt oxide - tin oxide nanocomposite based gas sensor on an $SiO_2$ substrate was fabricated. Granular thin film of tin oxide was formed by a rheotaxial growth and thermal oxidation method using dc magnetron sputtering of Sn. Nano particles of cobalt oxide were spin-coated on the tin oxide. The cobalt oxide nanoparticles were synthesized by polymer-assisted deposition method, which is a simple cost-effective versatile synthesis method for various metal oxides. The thickness of the film can be controlled over a wide range of thicknesses. The composite structures thus formed were characterized in terms of morphology and gas sensing properties for reduction gas of $H_2$. The composites showed a highest response of 240% at $250^{\circ}C$ upon exposure to 4% $H_2$. This response is higher than those observed in pure $SnO_2$ (90%) and $Co_3O_4$ (70%) thin films. The improved response with the composite structure may be related to the additional formation of electrically active defects at the interfaces. The composite sensor shows a very fast response and good reproducibility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.284-292
• /
• 2003

In this paper, we carried out the numerical examination of the initial value setting-up method to extend the range of optimal step parameter in a adaptive system which is controlled by LMS algorithm. For initial value setting-up methods, the general method which select the initial value randomly and the other method which applies the approximate value obtained from the direct method to initial value, were used. And then, we compared to the ranges of step parameter setting, the convergence speeds of mean-square-error, and the stabilities during the convergence process when the initial values were applied to the optimal directivity synthesis problem. According to the numerical simulation results, the initial value setting-up method by means of the direct method provides wider range for the step parameter, more efficient capability for convergence and stability, and more error correction ability than the general method.

• Journal of Powder Materials
• /
• v.23 no.1
• /
• pp.38-42
• /
• 2016

$BaTiO_3$-coated Fe nanofibers are synthesized via a three-step process. ${\alpha}-Fe_2O_3$ nanofibers with an average diameter of approximately 200 nm are first prepared using an electrospinning process followed by a calcination step. The $BaTiO_3$ coating layer on the nanofiber is formed by a sol-gel process, and a thermal reduction process is then applied to the core-shell nanofiber to selectively reduce the ${\alpha}-Fe_2O_3$ to Fe. The thickness of the $BaTiO_3$ shell is controlled by varying the reaction time. To evaluate the electromagnetic (EM) wave-absorbing abilities of the $BaTiO_3@Fe$ nanofiber, epoxy-based composites containing the nanofibers are fabricated. The composites show excellent EM wave absorption properties where the power loss increases to the high frequency region without any degradation. Our results demonstrate that the $BaTiO_3@Fe$ nanofibers obtained in this work are attractive candidates for electromagnetic wave absorption applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.714-719
• /
• 2017

The controlled synthesis of inorganic materials with a specific size and morphology is an important factor in the development of new materials in many fields, such as nanoparticles, medicine, electronics, semiconductors, pharmaceutical sand cosmetics. Solution crystallization is one of the most widely used separation processes in the chemical and pharmaceutical industries. Calcium carbonate has attracted a great deal of attention in industry because of its numerous applications. The mean crystal size, crystal size distribution and morphology are important factors in the continuous crystallization process. In this study, the continuous crystallization of calcium carbonate by the calcium chloride process was investigated. The mean crystal size and crystal size distribution data were obtained by a particle size analyzer. The morphological imaging of the crystalswasper formed by SEM. Under steady state operation, the mean crystal size change was small, but increasing the input concentration and mixing rate increased the crystal size. In this operation, some aragonite was found, but the main crystal phase was calcite.

• The Korean Journal of Pharmacology
• /
• v.19 no.2
• /
• pp.1-8
• /
• 1983

Prostaglandin(PG) is ubiquitously distributed in most mammalian tissue and their actions are complicated. Especially in autonomic nervous system, there are evidences indicating that PGs act as neuromodulators i.e., PGs, which are released in the vicinity of autonomic neuroeffector junctions, influence the release and the response of the neurotransmitter. Present study was undertaken to elucidate the interrelationship between $PGF_{2\alpha}$ and adrenergic ${\alpha}_2-receptor$ function in electrical field stimulation induced contractile response of vas deferens in rat. Male rat, weighing 150{\sim}200\;g, was sacrificed and vas deferens was obtained. The isolated vas deferens strip was placed between two platinum electrodes in temperature controlled $(37^{\circ}C)$ muscle chamber containing Tyrode's solution and the electrical field stimulation(EFS) induced contraction was recorded with Grass Polygraph(Model 7) via force displacement transducer (FT .03, Grass). The results are summarized as follows: 1) Electrical field stimulation for 1sec( 1 msec, 40 cps) induced contraction of vas deferens was completely blocked by tetrodotoxin. 2) Bretylium caused marked inhibition of the EFS-induced contraction, hut tyramine and cocaine augmented the contraction. 3) EFS-induced contraction was inhibited or little affected in distal portion of vas deferens by norepinephrine or methoxamine, but the contraction was rather augmented by the ${\alpha}-agonists$ in proximal portion. 4) Clonidine inhibited the EFS-induced contraction proportionally to the concentration in distal portion, which was blocked by yohimbine pretreatment, but in the presence of $PGF_{2\alpha}$ the blockade by yohimbine was reversed. 5) Indomethacin pretreatment reduced the effect of clonidine, but addition of $PGF_{2\alpha}$ after washing-out the indomethacin caused the contraction to the control level. From these results it is suggested that PG synthesis is a necessary step and the PG itself has a permissive role in ${\alpha}_2-adrenoceptor$ action in rat vas deferens.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.