• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.963-966
• /
• 1988

This paper describes the development of a prototype expert system, which is designed to analyze loom production efficiency by employing a loom monitoring system. The problem field of the prototype expert system is the loom failure analysis which has a great effect on prouction efficiency, and the characteristic graph in which the loom failure causes are classified and organized, is used in the analysis. The knowledge for characteristic graph is organized, and an effective inference engine- is developed. The developed system is tested and modified using hypothetical loom failure causes, and the feasibility of the expert system application to extend the functions of the loom monitoring system is proved.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2410-2415
• /
• 2000

This paper propose the new concept & design method and implementation of LonWorks network system for telemetry & remote monitoring and control in BAS. In order to apply this open system, the essential components of LonWorks is analyzed and a new concepts of its design method is proposed. In our experiment, LonWorks network system for telemetry & remote monitoring and control of lighting are designed and fabricated. As a result, it is verified that LonWorks is open, interoperable, reliable network system from the experimental results, especially, node development, network configuration & design, secure communication and MMI.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.19-29
• /
• 1995

The basic technology for a production system represented by design, machining, assembly, and inspection, is machining technology such as CNC machine tools. etc. Direct Numerical Control, that effeciently manages NC programs is developing into Distributed Numerical Control that increases the utilization of the machining cell. It has the ability of monitoring and control, in real time, for CNC and periperial equipment. In this study, we develop a Distributed Numerical Control system that has real time and multitasking operation capability for the machining cell with various CNC's. With the consideration of economy, generalization and extension, the system is interfaced with CNC machine tools and periperial device using RS-485 network and RS-232C communication methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.601-602
• /
• 2006

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1776-1786
• /
• 2010

Intelligent distribution automation system have total monitoring and control capability. The system covers substation, distribution network, distributed generations and customers at HV system. Various intelligent distribution facilities installed at distribution systems have voltage sensor, current sensor, aging monitoring sensor. Intelligent Feeder Remote Terminal Unit (IFRTU) tied to intelligent distribution facilities process information from facilities and it checks information of fault, power quality and aging of distribution facilities. The information is transmitted to master station through communication line. The master station have remote monitoring system covers substation, distribution network, distributed generations and customers. It also have various application programs that maintain optimal network operation by using information from on-site devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2989-2998
• /
• 2010

This study proposes the DMA(District Metered Area) operation technologies to reduce water losses in water supply network, such as development of DMA control and monitoring system and analysis method of DMA water flow and pressure analysis. DMA boundary analysis and control and monitoring systems of J city was studied in advance, and some problems to be improved was presented. Water losses analysis program was developed to assess the effects of this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.324-324
• /
• 2000

This paper presents a CAN-based control system, which supports tole-operations over the Internet. As a result, CAN-based control systems are opened up for remote control, monitoring and maintenance using WWW-technology. Most of the system is written in JAVA because it is small, powerful package and can easily be reused in the whole system on different platforms and implemented in embedded system. The effectiveness of proposed method is demonstrated through the experiments using a CAN-based manipulator, which allow remote access for Web-based Java clients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.746-753
• /
• 2004

In this paper, the Power Management System(PMS) which based on a decision making system according to power strategy is proposed and implemented. PMS is designed to have functions of power monitoring. controlling, synchronizing load sharing and monitoring of driving engine, etc. PMS consists of the internet communication system(ICS). Remote Management System(RMS) and Sensor Driver System (SDS) ICS transmits the monitoring and supervisory data via Internet to Remote Management System(RMS) in real-time SDS detects various power system data on local generator and utility via I/O interface system. I/O interface system receives various status data and outputs control signals. Implemented PMS is tested with dummy signal to verify proposed functions and shows good results. For future study implemented PMS will be tested under real load condition to merchandize.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.