• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.679-685
• /
• 2004

Although the electrophoretic deposition method has the advantage of simple processing procedure, less fabrication facilities, and easier control for deposition thickness and wire length, providing economical and technical merits, it also has the disadvantages of cracking and porosity phenomena, requiring an improved processing method for higher particle density and constant particle orientation. we have developed an optimization method to increase the particle density and to unify its orientation, and have performed a study to overcome the cracking and porosity problems in the fabricated superconductor. In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternate voltage vertically has been developed for the first time and applied to the electrophoretic deposition process. The applied alternate electric field caused a force to be exerted on each YBCO particle and resulted in a rotation of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. We name this process as the shaky-aligned electrophoretic deposition method. For commercial utilization and efficiency, in this dissertation, alternating voltage of 60 Hz and 25 ∼ 120 V/cm was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and Tc,zero of 90 K and the critical current density of 3419 A/$cm^2$.

• Korean Journal of Pharmacognosy
• /
• v.46 no.2
• /
• pp.167-172
• /
• 2015

Aleurone layer of Black rice (Oryza sativa L.) is enriched with anthocyanin that could increase bone density. This study was conducted to investigate the osteoporosis-preventing effects of the aleurone layer extract (BRE) on bone loss of ovariectomized (OVX) rats. OVX (or sham-operated) rats were assigned to three groups (n=8 per group): sham operated group (Sham); OVX control group (OVX); OVX-BRE group, OVX rats treated with BRE at 90 mg/kg B.W. The deionized water alone or deionized water with BRE was orally administrated to Sham, OVX or OVX-BRE groups, respectively for 12 weeks. High fat diet with 45 kcal% fat and water were fed to all rats ad libitum. Body weight was significantly decreased in the OVXBRE group compared to the OVX group (p<0.05). The bone mineral density and bone length of tibia were significantly higher in the OVX-BRE group compared to the OVX group and breaking force was significantly higher for the both tibia and femur bones. Serum estradiol concentration and calcium concentration of femur were higher in the OVX-BRE group than those of OVX group. However, serum alkaline phosphatase activity and parathyroid hormone concentration were decreased in the OVXBRE group compared to the OVX group. The results suggest that aleurone layer of Black rice is a potentially useful ingredient to protect against estrogen deficiency or menopause related osteoporosis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.76-76
• /
• 2000

최근 비정질 SiC 박막은 열과 광안정도면에서 비정질 Si 박막에 비해 우수하며 공정변수들을조절함으로써 비교적 쉽고 다양하게 광학적.전기적 특성을 얻을 수 있고, 낮은 광흡수계수 및 105($\Omega$cm)1 이상의 높은 전도도를 가지고 있어 Plasma Enhanced Chemical Vapor Deposition(PECVD)을 통해 가전자제어 (Valency electron control)가 가능한 비정질 SiC 박막이 제작된 이래 대한 많은 연구가 진행되고 있다. 결정성이 없는 비정질 물질은 상대적으로 낮은 온도에서 성장이 가능하며, 특히 glow-sidcharge 방식으로 저온에서 성장시킬 수 있음에 따라 유리등과 같은 다른 저렴한 물질을 기판으로 이용, 넓은 면적의 비정질 SiC 박막을 성장시켜 여러 분야의 소자에 응용되고 있다. 비정질 SiC 박막이 넓은 에너지띠 간격을 갖는 물질이라는 점과 화학적 안정성 및 높은 경도, 비정질성에 기인한 대면적 성장의 용이성 등의 장점이외에, 원자의 성분비 변화에 의해 에너지띠 간격(1.7~3.1eV)을 조절할 수 있다는 점은 광전소자의 응용에 큰 잠재성이 있음을 나타낸다. PECVD 방식으로 성장된 비정질 SiC 박막은 태양전지의 Window층이나 발광다이오드, 광센서, 광트랜지스터 등에 응용되어 오고 있다. 본 연구에서는, RF-PECVD(ULVAC CPD-6018) 방법에 의하여 비정질 Si1-xCx 박막을 2.73Torr의 고정된 압력에서 RF 전력(50~300W), 증착온도(150~30$0^{\circ}C$), 주입 가스량 (SiH4:CH4)등의 조건을 다양하게 변화시켜가며 증착된 막의 특성을 평가하였다. 성장된 박막을 X-ray Photoelectron Spectroscopy(XPS), UV-VIS spectrophotometer, Ellipsometry, Atomic Force Microscopy(AFM)등을 이용하여 광학적 밴드갭, 광흡수 계수, Tauc Plot, 그리고 파장대별 빛의 투과도의 변화를 분석하였으며 각 변수가 변화함에 따라 광학적 밴드갭의 변화를 정량적으로 조사함으로써 분자결합상태와 밴드갭과 광 흡수 계수간의상관관계를 규명하였고, 각 변수에 따른 표면의 조도를 확인하였다. 비정질 Si1-xCx 박막을 증착하여 특성을 분석한 결과 성장된 박막의 성장률은 Carbonfid의 증가에 따라 다른 성장특성을 보였고, Silcne(SiH4) 가스량의 감소와 함께 박막의 성장률이 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 줄어들어 성장률이 Silane가스량에 의해 지배됨을 볼 수 있다. UV-VIS spectrophotometer에 의한 비정질 SiC 박막의 투과도와 파장과의 관계에 있어 유리를 기판으로 사용했으므로 유리의투과도를 감안했으며, 유리에 대한 상대적인 비율 관계로 투과도를 나타냈었다. 또한 비저질 SiC 박막의 흡수계수는 Ellipsometry에 의해 측정된 Δ과 Ψ값을 이용하여 시뮬레이션한 결과로 비정질 SiC 박막의 두께를 이용하여 구하였다. 또한 Tauc Plot을 통해 박막의 optical band gap을 2.6~3.7eV로 조절할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.771-782
• /
• 2017

This paper describes the development of a wearable robot to assist ankle power for the elderly. Previously developed wearable robots have generally used motors and gears to assist muscle power during walking. However, the combination of motor and reduction gear is heavy and has limitations on the simultaneous control of stiffness and torque due to the friction of the gear reducer unlike human muscles. Therefore, in this study, Mckibben pneumatic muscle, which is lighter, safer, and more powerful than an electric motor with gear, was used to assist ankle joint. Antagonistic actuation using a pair of pneumatic muscles assisted the power of the soleus muscles and tibialis anterior muscles used for the pitching motion of the ankle joint, and the model parameters of the antagonistic actuator were experimentally derived using a muscle test platform. To recognize the wearer's walking intention, foot load and ankle torque were calculated by measuring the pressure and the center of pressure of the foot using force and linear displacement sensors, and the stiffness and the torque of the pneumatic muscle joint were then controlled by the calculated ankle torque and foot load. Finally, the performance of the developed ankle power assistive robot was experimentally verified by measuring EMG signals during walking experiments on a treadmill.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.65-73
• /
• 2002

It has been recognized that the damage control must become a more explicit design consideration. In an effort to develop design methods based on performance it is clear that the evaluation of the nonlinear response is required. The methods available to the design engineer today are nonlinear time history analyses, monotonic static nonlinear analyses, or equivalent static analyses with simulated nonlinear influences. Some building codes propose the capacity spectrum method based on the nonlinear static analysis(pushover analysis) to determine the earthquake-induced demand given by the structure pushover curve. These procedures are conceptually simple but iterative and time consuming with some errors. This paper presents a nonlinear direct spectrum method(NDSM) to evaluate seismic performance of structures, without iterative computations, given by the structural initial elastic period and yield strength from the pushover analysis, especially for MDF(multi degree of freedom) systems. The purpose of this paper is to investigate the accuracy and confidence of this method from a point of view of various earthquakes and unloading stiffness degradation parameters. The conclusions of this study are as follows; 1) NDSM is considered as practical method because the peak deformations of nonlinear system of MDF by NDSM are almost equal to the results of nonlinear time history analysis(NTHA) for various ground motions. 2) When the results of NDSM are compared with those of NTHA. mean of errors is the smallest in case of post-yielding stiffness factor 0.1, static force by MAD(modal adaptive distribution) and unloading stiffness degradation factor 0.2~0.3.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.81-86
• /
• 2007

This study was conducted to evaluate the quality characteristics of pork jerky added with the extracts of paprika (Capsicum annuum L.) and Japanese apricot (Prunus mume Sieb. et Zucc.). Color stability, lipid oxidation, texture, and consumer acceptability of the pork jerky were also compared before and after storage of 70 days. The pork jerky added with 0.5% paprika extract and 3.5% Japanese apricot extract had the highest score for overall acceptability. The redness (a-value) of the pork jerky added with the natural extracts had a similar level as the one with nitrite. The extracts of paprika and Japanese apricot were also effective in inhibiting the lipid oxidation of the pork jerky during storage. In texture measurement, the total shear force of the natural extracts-treated sample was lower than that of control (the natural extracts-untreated samples). All sensory properties of the pork jerky were significantly (p<0.05) improved by the addition of the natural extracts. The results of this study indicated that the extracts of paprika and Japanese apricot could be used as natural agents for retarding color and lipid oxidations.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2021

Materials used for education include SM20C, Al6061, and acrylic. SM20C materials are used a lot in certification tests and functional competitions as carbon steel, but they are also used in industrial sites. Al6061 is said to be a material that produces a lot of tools because it has lower hardness than carbon steel and is highly flexible. When practical guidance is given to students using acrylic materials, it is a material that causes vibration and tool damage due to excessive cutting. In this process, we examine how impact on the 5-axis equipment 2NC head can affect precision control. The weakest part of a five-axis equipment is the head that controls the AC axis. In the event of precision and cumulative tolerances in this area, the precision of all products is reduced. Thus, a key part of the 2NC head, the spindle housing was carried out using Al7075 T6 (U.S. Alcoasa) material and the entire body using FCD450 (spherical graphite cast iron). In the vibration and cutting process acting on these two materials, the analysis was carried out to determine the value of applying the force as a finite element analysis under extreme conditions. We hope that using these analytical data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.269-293
• /
• 2016

This research studies the characteristics of the family systems of traditional societies in Black Africa. For this purpose, this study has chosen three subtopics: the distinctive features of traditional societies, marriage customs (polygamy and polyandry), and the societal features of patriarchal and matriarchal societies. First, we analyze men's and women's roles, ownership and management of the land, dowry, and social values of livestock as the distinctive features that support the family system in traditional Black African societies. These elements play an important role in increasing the number of family members. Next we analyze marriage customs-polygamy and polyandry-which increase the number of family members, on the one hand, and secure the labor force, on the other hand. Most traditional societies in Black Africa prectice polygamy. However, the $Bashil{\acute{e}}l{\acute{e}}$ and Bahima prectice polyandry. Polygamy in traditional societies in Black Africa is based on the traditional social customs that display the authority and dignity of the family head, who has control over all family members in both patrilineal and matrilineal societies. The authority and dignity of the family head are used to keep and increase the number of family members, that is, to secure the community firmly. Finally, most traditional societies are patrilineal. However, matrilineal societies are prevalent in the so-called Matrilineal Belt, which term refers to the savanna regions where Bantu peoples reside, that is, the coastal regions from the Angolan coast, bordering the Atlantic, to the Tanzanian and Mozambique coasts that border the Indian Ocean. These societies trace descent through the maternal bloodline. The traditional family system in Black Africa is based on economic social, and political factors, as well as on the community spirit of the members, which has resulted from the choices made to increase the prosperity and well-being of the people.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.750-757
• /
• 2018

The mechanically stabilized earth wall abutment is an earth structure using a mechanically stabilized earth wall and it uses in-extensional steel reinforcements having excellent friction performance. In order to analyze the pullout behavior of in-extensional steel reinforcements usually applied on the mechanically stabilized earth wall abutment, effects of stiffness and particle-size distributions of backfills and also horizontal spacings were considered in this study. As a result of parametric analyses, the highest pulling force acted on the uppermost reinforcement, and the stiffness and the particle-size distributions of the backfill significantly affected the pulling resistance of the reinforced soils. The internal friction angle of backfills should be at least 25 degrees, the coefficient uniformity factor should be at least 4, and the horizontal spacing of the uppermost steel reinforcement should be less than 25cm. Therefore, in order to secure the pullout resistance of the reinforced soil, it is necessary a properly spacing of reinforcement and more strict quality control for the backfill.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.93-104
• /
• 2019

This study examined the relationship between the number of medical technologists and the medical test count. Data was obtained from 441 medical technologists in a hospital through a self-reported questionnaire. The Pearson correlation test, student's t-test, ANOVA or descriptive statistics were performed for data analysis. The distribution of medical technologist according to the size of hospitals was small 5.8, medium 14.9, large 25.8, and super 45.4. The analysis demonstrated a relationship between the number of medical technologists and the number of medical tests in the field, number of clinical tests per MT, and number of optimal medical test per MT according to the hospital size (P<0.001). The average time for quality control by the department at a higher hospital was less than two hours. In terms of the satisfaction of salary, work environment, test accomplishment, and welfare service, the dissatisfaction of medical technologists in small and medium hospitals was higher than those in large and super hospitals. Overall, a focus on intensifying systemic supplementation and improving the condition of medical technologists is needed to provide reliable data for medical examinations in medical areas.