• 한국식품과학회지
• /
• 제40권4호
• /
• pp.406-411
• /
• 2008

본 연구는 청국장의 품질을 향상시키고 최적화시키기 위해 경기도 이천에서 높은 효소가를 가진 균주를 분리 동정하며 선택된 균주들을 이용하여 최적배합비를 산출하고자 하였다. 16S rDNA와 PCR을 이용하여 균주를 동정한 결과, 39개의 균주 대부분이 B. subtilis와 B. licheniformis이었으며 곰팡이는 검출되지 않았고 그 중 5개의 균주가 높은 역가를 나타내었다. 고품질의 장류생산 및 최적화 공정을 확립하기 위해 분리 동정한 균주중에서 amylase, protease, lipase와 cellulase의 활성이 높은 균주를 3개 선택하여 최적화 공정작업에 이용하였고 실험법에 의해 청국장을 제조하였다. 암모니아태질소, 선호도, 아미노태질소 및 항산화가에 근거를 두어 contour map과 numerical 최적화를 한 결과, 50%의 Bacillus sp. SC-l과 50% SC-3을 섞었을 때 최적의 청국장이 만들어졌다.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.441-448
• /
• 2011

최근 디지털 항공사진을 이용한 수치도화가 보편화 되었으며 이로 인해 지표에 대한 3차원 데이터를 정확하게 획득하고 있다. 도화원도는 도화사가 지표를 육안으로 확인하여 제작한 신뢰 있는 3차원 데이터이며 등고선과 표고점 이외에도 지형지물에 대해 3차원 좌표를 가지고 있는 점, 선으로 표현되었을 뿐 아니라 레이어로 분류되어 활용성이 매우 크다. 본 연구에서는 도화원도를 이용해 정밀하고 정확한 수치표고모델을 제작하고자 한다. 이를 위해 수치지형도에서 등고선과 표고점 레이어를 추출하였고 도화원도에서 Break Line을 추출하여 각각 수치표고모델을 제작하였으며 이 두 결과를 비교하였다. 비교를 위해 주거지, 산지, 농경지, 제방 등 경사가 완만하거나 복잡한 지형을 연구지역으로 선정하여 최적의 수치표모델이 제작될 때까지 반복적으로 레이어를 삭제하면서 Break Line을 추출하였다. 그 결과 도화원도에서 등고선과 표고점 레이어를 비롯해 8개의 도로 레이어 및 2개의 경계 레이어를 Break Line으로 추출하였으며 이를 이용해 더욱 정밀한 수치표고모델을 획득할 수 있었다. 또한 교차하거나 접하는 Break Line을 편집하여 복잡하고 변위가 급격한 지형에서 수치표고모델의 왜곡현상을 최소화할 수 있었다.

• 천문학회보
• /
• 제40권1호
• /
• pp.83.2-83.2
• /
• 2015

The Goheung radio interferometer with three 1.8-m antennas has been installed at National Youth Space Center in Goheung, Korea. The interferometric observation of the Sun using the Goheung radio interferometer was carried out and the observed data was analysed to construct the radio contour map of the Sun in 2014. The specifications of Goheung radio interferometer and the synthesized interferometer map of the Sun are provided. As a science activity center for youth, we currently provide students some experimental activities based on the principle of radio observation and interferometer. Our goal is to encourage youth to be interested in astronomy by engaging real experience of radio observation and constructing a synthesized interferometer map with observed data.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.64-75
• /
• 1993

This paper proposes a recovering technique of the elevation map by stereo modeling of the aerial image sequence which is transformed based on the aircraft situation. The area-based stereo matching method is simulated and the various parameters are experimentally chosen. In a depth extraction step, the depth is determined by solving the vector equation. The equation is suitable for stereo modeling of aerial images which do not satisfy the epipolar constraint. Also, the performance of the conventional feature-based matching scheme is compared. Finally, techniques analyzing the accuracy of the recovered elevation map (REM) are described. The analysis includes the error estimation for both height and contour lines, where the accuracy is based on the measurements of deviations from the estimates obtained manually. The experimental results show the efficiency of the proposed technique.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.475-484
• /
• 2006

Recently, the studies on the extraction of 3-dimension coordinate and attribute information of objects using LiDAR data are carried out widely. LiDAR data has high locational accuracy, and advantage that can process data more fast because there's not coordinate transform when acquire of Data justly the ground coordinate by Acquiring. The purpose of the paper using only LiDAR data Manufacture road, building, contour That occupy a many parts of Digital Map. Estimated for possibility of Digital mapping using only LiDAR data As that compare accuracy with traditional Digital map.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.398-401
• /
• 2001

This paper presents rough cutting pat고 drilling. This method has differences from conventional method which uses boundary curve by intersecting object to machine and each cutting plane. Die-cavity shape is drilled in z-map, we select various tool and remove much material in the short time. as a result, this method raise productivity. The major challenges in die-cavity pocketing include : 1)finding an inscribed circle for removing material of unmachined regions, 2) selecting optimal tool and efficiently arranging tool, 3) generating offset surface of shape, 4) determining machined width according to the selected tool, 5) detecting and removing unmachined regions, and 6) linking PJE(path-joining element). Conventional machining method calling contour-map is compared with drilling method using Z-map, for finding efficiency in the view of productivity.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.21-26
• /
• 1997

For 262 locations throughout the southern part of Korean peninsula, intensities of 13 December 1996 Yeongweol earthquake are estimated to make an isoseismal map and investigate attenuation properties in the southern part of Korea. Due to the inherent uncertainties in the estimation of intensities, obtained intensity map show quite scattered pattern of intensity distribution. Estimated intensities range from III to possibly Ⅷ. In case of intensity larger than Ⅵ, considerable damages such as fracturing of walls are reported one of the most significant feature of the intensity map is, considering its magnitude 4.7 reported by KMA, the felt area is appeared to be unusually large covering most of the Korean peninsula except Cheju island. This result indicates ether the magnitude is underestimated or the focus of this earthquake is much deeper. Assuming shallow(less than 10km) intraplate earthquake, we obtained average magnitude 5.6 by using the area encircled by isoseismal contour lines from intensity IV to intensity Ⅶ. This ambiguity can be clarified if more reliable focal depth is estimated by using teleseismic earthquake records in the future.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.7-21
• /
• 2019

In order to improve the edge segmentation effect of the level set image segmentation and avoid the influence of the initial contour on the level set method, a saliency level set image segmentation model based on local Renyi entropy is proposed. Firstly, the saliency map of the original image is extracted by using saliency detection algorithm. And the outline of the saliency map can be used to initialize the level set. Secondly, the local energy and edge energy of the image are obtained by using local Renyi entropy and Canny operator respectively. At the same time, new adaptive weight coefficient and boundary indication function are constructed. Finally, the local binary fitting energy model (LBF) as an external energy term is introduced. In this paper, the contrast experiments are implemented in different image database. The robustness of the proposed model for segmentation of images with intensity inhomogeneity and complicated edges is verified.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.29-44
• /
• 2006

This study was aimed at giving help to the people intending to change hair fashion feeling for making their own hair style design and also providing the academic guide line to the cosmetic circles for developing new hair design and promoting sales by producing hair styles following the results from the statistical analysis based on the theoretical study on the face contour groups & hair fashion feeling groups. The researching methods were composed of following 3 steps ; prior theoretical research, statistical analysis, and hair style production. At first, the prior theoretical research was accomplished by analysis of literatures, magazines and internet sites about face contour, total & hair fashion feelings, hair style productions. Second, the prior statistical analysis were done about hairstyle images & their charateristics based on fashion feelings, and characteristics of fashion feeling group. And the third, hair style productions were done coordinated by face contours(oval, circle, long, square, reverse triangle) and hair fashion feelings(natural, sexy, sophisticate, ethnic, romantic pretty, elegance, sporty, avant garde) following the statistical results. But owing to the limitations to change hair length and color, these changes are modified by wigs and photoshop 7.0 program. So we could know there was no confirmed hair fashion feeling of one's best, but one could change one's hair fashion feeling and express one's beauty if one could adjust one's hair styles properly to one's face contour. This study would be very helpful to the people trying to change their own hair fashion feeling and be useful to the cosmetic circles for developing new design and promoting sales by comprehending hair design market and also be valuable to develop the methodology of 3 step research.

• 한국측량학회지
• /
• 제27권4호
• /
• pp.469-476
• /
• 2009

최근 측량기술과 정보통신기술이 발전함에 따라 다양한 공간정보 자료를 획득할 수 있게 되었다. 새로운 레이저측량기술은 정밀한 지형과 수목 및 인공지물 등에 대한 3차원 정보를 신속하게 획득하고 사용자가 원하는 정보로 가공하여 다양한 분야에서 활용되고 있다. 특히 정밀한 지형에 대한 등고선 제작은 기존의 항공사진측량에 의한 방법의 문제점을 해소하는 진보된 기술로써 수목에 의해 가려진 산악지의 지형을 상세하게 표현하고 정확도와 균질성을 확보하여 최근 국가기본도 수정제작 등 시범사업이 진행되고 있다. 그러나 고정밀의 라이다 데이터를 이용하여 등고선을 제작할 경우 대용량 라이다 데이터에 의해 등고선의 도형이 복잡해지고 용량이 비효율적으로 증가하는 문제점이 있다. 본 연구에서는 정밀한 지형 데이터로부터 생성되는 라이다 등고선의 효율적인 활용을 위하여 단계별로 필터링을 실시하여 실제 지형의 형태는 그대로 표현하면서 가벼운 용량의 등고선을 생성하는 알고리즘을 구현하였고 라이다 데이터의 필터링을 통하여 지형의 형태를 그대로 표현하면서 데이터의 용량을 최소화하였다. 따라서 본 연구는 라이다 등고선의 적극적인 활용을 위하여 알고리즘을 개발하고 연구지 역을 대상으로 적용한 후 현행 수치지도와 비교해 보았다. 이러한 정밀 등고선은 건설 분야뿐만 아니라 생태지도 및 주제도, 재해 환경 분야, 홍수지도, 도시모델링 등 수요가 확대될 전망이다.