• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.552-554
• /
• 1987

A design principles of discontinuous control are studied and then are applied to position control of D. C. sevo drive fed by a four-quadrant chopper. Variable structure control with sliding mode gives fast dynamic response with no overshoot. And the resulting system bas good robust properties independent of the wide variations of electrical, mechanical parameters and external disturbances without any system identification. But the high frequency chatter component of control input in the sliding mode is undesirarable. A continuous control law that is a approximation to discontinuous control law is used for design.

• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.12-17
• /
• 2014

In this paper, optimal design of composite rotor blade cross-section to consider manufacturability was performed. Skin thickness, torsion box thickness and skin lay-up angle were adopted as discrete design variables and The position and width of a torsion box were considered as continuous variables. An object function of optimal design is to minimize the mass of a rotor blade, and various constraints such as failure index, center mass, shear center, natural frequency and blade minimum mass per unit length were adopted. Finally, design variables such as the thickness and lay-up angles of a skin, and the thickness, position and width of a torsion box were determined by using an in-house program developed for the optimal design of rotor blade cross-section.

• Journal of Astronomy and Space Sciences
• /
• 제11권2호
• /
• pp.281-295
• /
• 1994

본 논문에서는 운동량 바이어스 안정화된 인공위성의 능동 미동 제동율 위한 자동 제어기의 설계에 새로운 연속의 스위칭 방정식율 도입한 가변구조 시스댐 이론을 사용하였다. 일반적으로 미동 제동을 갖고 있는 션형화된 다변수 시스템에 가변구조 이론을 적용할 때, 스위칭 이득을 어떻게 결정해야 하는지, 진동 현상과 입력과 상태 궤적에 도달기간을 어떻게 줄여야 하는지 등의 단점을 갖고 있다. 이러한 문제를 해결하기 위해서 본 논문에셔는 슬라이딩 모드를 얻기 위한 불연속의 스위칭 로직 대신에 연속의 스위칭 방정식을 제시하였다. 이 새로운 접근방법은 기존의 가변구조 이론에 의한 방법보다 훨씬 간단하고, 구해진 제어입력이 연속이므로 진동현상이 없으며, 동시에 설계인자를 적절하게 선정하므로써 도달기간을 줄일 수 있게 된다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.265-270
• /
• 2007

Polarization imaging systems have been widely used to selectively characterize skin lesions. Nevertheless, current systems are used in single-mode due to the limitations of a fixed polarization mode and a single-working distance of light source, in which uniform light distribution is achieved on target area. To address such limitations, we developed a variable polarization imaging system based on multi-working distance of light source for various clinical diagnoses. In this study, we characterize the imaging system and present experiment results demonstrating its clinical usefulness. The imaging system consists of a CCD color camera, linear polarization filters, and a single-layered LED ring light source which provides uniform light distribution at multi-working distances. The first polarizer was placed on the light source and the second polarizer placed on objective lens provides continuous linear polarization angle from $0^{\circ}\;to\;90^{\circ}$. The clinical efficacy of the imaging system was investigated by acquiring and analyzing clinical images of skin wrinkle and dental plaque. With the experiments, we verified the potential usefulness of the imaging system for other clinical applications.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.63-69
• /
• 1999

The research trend of the simulation optimization has been focused on exploring continuous decision variables. Yet, the research in discrete decision variable area has not been fully studied. A new research trend for optimizing discrete decision variables ha just appeared recently. This study, therefore, deals with a discrete simulation method to get the system evaluation criteria required for designing a complex probabilistic discrete event system and to search the effective and reliable alternatives to satisfy the objective values of the given system through a on-line, single run with the short time period. Finding the alternative, we construct an algorithm which changes values of decision variables and a design alternative by using the stopping algorithm which ends the simulation in a steady state of system. To avoid the loss of data while analyzing the acquired design alternative in the steady state, we provide background for estimation of an auto-regressive model and mean and confidence interval for evaluating correctly the objective function obtained by small amount of output data through simulation with the short time period. In numerical experiment we applied the proposed algorithm to (s, S) inventory system problem with varying Δt value. In case of the (s, S) inventory system, we obtained good design alternative when Δt value is larger than 100.

• Asia pacific journal of information systems
• /
• 제19권3호
• /
• pp.151-179
• /
• 2009

The purpose of this study is to make an empirical analysis on the factors affecting the intention for the continuous use of the BSC system, which has been recently spread in the public sector. Because the object of acceptance is the performance management system based on BSC (Balanced Scorecard) implemented in the form of information systems, this study proposes a research model by applying TAM (Technology Acceptance Model). Independent variables are factors affecting the acceptance of BSC system such as training, communication, IS support, CEO support and personal innovativeness, and we examine their effects on the dependent variable, namely, intention on continuous use via mediating variables: perceived usefulness and perceived ease of use. A questionnaire survey was conducted with public institutions(firms) that had introduced and were operating the BSC system; 264 valid questionnaires are adopted. Collected data are analyzed using SPSS 16.0 and AMOS 7.0. Results of reliability test show that all analyzed data are reliable. In validity test, one item regarding communication was excluded; 9 latent variables and 34 observed variables are used in the final analysis. Based on the results of the hypothesis test through path analysis using a structural equation model, 10 out of 16 hypotheses are accepted. Factors affecting perceived usefulness are training and IS(Information System) support. The analysis results indicate that perceived ease of use is mainly affected by IS support, CEO support, and personal innovativeness among the factors related to the acceptance of the BSC system. This suggests that, contrary to the expectation that the BSC system may be used without difficulty, the management's active support is required in order to attain expected improvement in productivity and work efficiency. This was also pointed out in case studies on the construction of the BSC system in public sectors. On the other hand, perceived ease of use is found to affect perceived usefulness. This supports the results of previous researches on TAM. Perceived ease of use and perceived usefulness are found to affect the attitude towards the use of the system. The intention on continuous use is affected more by perceived usefulness than by the attitude towards the use of system. This result supports the results of previous researches on TAM, showing that the BSC system is utilized substantially in worksites. This study is considered meaningful in that it was actually performed on users at public institutions(firms) that had introduced the BSC system and that it empirically tested hypotheses on the acceptance of the BSC system by applying TAM to the research model.

• 산업경영시스템학회지
• /
• 제20권42호
• /
• pp.31-38
• /
• 1997

The main objective of this research is to develop a model to select the optimal input service level for a distribution center - multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time. Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service level for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.571-575
• /
• 1989

A position control system of D.C. Servo motor based on discrete variable structure system with sliding mode is presented. The sliding mode has been designed for a continuous system, but it is often realized in digital fashion because the complex switching logic can be easily carried out. In digital control system, the ideal sliding mode does not occur since the structure can't be switched during sampling interval. However, there can be exist a motion which is confined to a regoin including the sliding surface and proceeds to the origin along the surface. This notion is called quasisliding mode. In this paper, we introduce this control scheme to the D.C. Servo motor position control in order to reduce the chattering phenonenon.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.813-821
• /
• 2000

In this paper, we developed modeling of tension and speed dynamics for a two-drum winder in a three span continuous web transport system which had not been previously. Dynamic modeling of the time-varying nonlinear system was derived by considering the effect of the radii and mass moment of inertia in the unwinder and the two-drum winder through winding up the web. After linearizing it, we designed with a variable-gain a PID controller for tension control and a PI controller for speed. Simulation is carried out with the variation of radii and moment of inertia at high speed for the proposed tension control system with the two-drum winder and the variavle-gain a PID controller. Results show good performance of tension control during the speed change speed at a start-up and stop.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.547-551
• /
• 1996

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagrangian assumed modes method based on Bernoulli-Euler Beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoption of a continuous control law within a small neighborhood of the switching hyperplane.