• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.257-263
• /
• 2013

In case of image observation equipments, CCTV for short distance visual field is usually installed and operated mostly as the means of crime-prevention. However, the extensive demand for monitoring problems in case of the increase in intelligent crimes and disasters has led to the necessity of the development of long-distance observation equipments embedded with Night View functions. In case of the Night View equipments, the relevant market is set up to be focused mostly on Thermal Observation Device(hereinafter, TOD), but some shortcomings such as the limitation of image visibility and excessive maintenance cost, etc. have actually caused the necessity of new long distance Night View equipment. Moreover there might follow lots of difficulties in long-distance visualization in the event that irregular reflection is generated by minute particles in the atmosphere such as fog, smog, and dust, etc. These factors are motivate the work presented in this study. Our study is aimed at the realization of Pulsed Laser Illuminator and newly proposed Range-Gated image acquisition technology. And also the implementation of Tracker for continuous trace of the objects of interest from the obtained sequence images.

• Atmosphere
• /
• v.31 no.4
• /
• pp.421-431
• /
• 2021

The Yeongdong region is frequently vulnerable to heavy snowfall in winter in terms of societal and economical damages. By virtue of a lot of previous efforts, snowfall forecast has been significantly improved, but the performance of light snowfall forecast is still poor since it is very conducive to synoptic and mesoscale interactions, largely attributable to Taeback mountains and East Sea effects. An intensive observation has been made in cooperation with Gangwon Regional Meteorological Office and National Institute of Meteorological Studies in winter seasons since 2019. Two distinctive Cold Air Damming (CAD) events (14 February 2019 and 6 February 2020) were observed for two years when the snowfall forecast was wrong specifically in its location and timing. For two CAD events, lower-level temperature below 2 km ranged to lowest limit in comparisons to those of the previous 6-years (2014~2019) rawinsonde soundings, along with the stronger inversion strength (> 2.0℃) and thicker inversion depth (> 700 m). Further, the northwesterly was predominant within the CAD layer, whereas the weak easterly wind was exhibited above the CAD layer. For the CAD events, strong cold air accumulation along the east side of Taeback Mountains appeared to prevent snow cloud and convergence zone from penetrating into the Yeongdong region. We need to investigate the influence of CAD on snowfall in the Yeongdong region using continuous intensive observation and modeling studies altogether. In addition, the effect of synoptic and mesoscale interactions on snowfall, such as nighttime drainage wind and land breeze, should be also examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.683-690
• /
• 2008

The objectives of this study are to provide an observation-based urban flood prediction model and to evaluate their performance on a restored Cheonggye stream. The study area, which has its own unique hydrologic and flooding conditions that can be characterized the standard of flood occurrence by watergate opening and walk lane inundation, measured stream discharges at the 5 sites and watergate opening and walk lane inundation through the main stream since 2006. This study derived the relationship between precipitation intensity and watergate opening and walk lane inundation time by using the observations of 2006 and verified their performance on 2007 flood events. The result showed that the coefficients of determination are ranged on 0.57-0.75, which would be acceptable if considering the complexity of the area and the proposed model simplicity. It also suggested the continuous observation of these properties is required for further improvement of the models.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.84-101
• /
• 1995

The periodic health examination have been shown the important role on early detection, early treatment and prevention of disease. Until now, there have been many studies that showed the effectiveness of the periodic health examination on the early detection and early treatment of disease to some extent. But there are few studies about primary prevention before health problem arise. In this case-control study, 29 newly detected hypertensive cases, 31 liver disease cases and 65 controls which are all available for 6-year data in the periodic health examination of a occupational field were compared to investigate the significant increase trend of health status between the groups. The results will be used for the occupational health nurses to provide appropriate primary prevention to the employees. The hypertensive and liver disease cases were divided observation-needed group and treatment-needed group. The data on systolic blood pressure, diastolic blood pressure, Body Mass Index and Broca Index in hypertensive cases and SGOT, SGPT, Body Mass Index and Broca Index in liver disease cases were analyzed by t-test and ANOVA. The specific findings are summarized as follows. 1. In the comparison between the hypertensive cases and controls, SBP and DBP of the observation-needed group and the treatment-needed group were significantly higher than the data of the controls for past 6 years. It was 2-3 years ago showing increase over 140/90mmHg of blood pressure in the hypertensive cases before they are categorized as hypertensive cases. In the observation-needed group and the treatment-needed group, the trend of the blood pressure for 6 years were significantly higher than the one of the controls. 2. In the comparison between the liver disease cases and controls, SGOT and SGPT of the observation-needed group and the treatment-needed group were significantly higher than the data of the controls for past 6 years. It was 2 years ago showing increase within upper normal limit of SGOT and 5 years ago of SGPT in the liver disease cases before they are categorized as liver disease cases. In the observation-needed group and the treatment-needed group, the trend of the liver enzyme for 6 years were significantly higher than the one of the controls. With these results, the author proposed that intervention for the primary prevention such as continuous follow-up, health education and weight control to the population who has over 140/90mmHg of blood pressure and upper normal limit of AST and ALT.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.147-151
• /
• 2009

In general, the discrete confidence judgments that use five-step assessment method have been used to assess the medical images by ROC. TPF or FPF can be computed easily with this independent reading test. However, during experiments, it happens frequently that adequate distribution for observers is required to smoothly estimate the ROC curve. In addition, data becomes invalid for distribution of the created categories. To solve such problems or to apply the ROC interpretation to data that is not obtained from the experimental observation, the continuous confidence judgements (CCJ) has been proposed, which implements ROC interpretation using continuously-distributed experimental results without category classification has been used. As the use of CCJ to assess medical images was barely reported in Korea, we applied it to the assessment of chest digital images in this study. The results showed that a smooth ROC curve was obtained conveniently by the commercialized program and the characteristic value was measured easily. Therefore, it is recommended that this method can be applied to the assessment of digital medical images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.4 s.22
• /
• pp.61-67
• /
• 2002

This study is aimed to suggest a practical use of GPS continuous stations by conducting the precision analysis using its data. Currently dozens of continuous stations have been installed and operated since the first GPS continuous station built by KAO(Korea Astronomy Observation) in 1985. The utilization of the surveyed information, however, has been under-developed regardless of a significant investment, which leads the necessity of utilization plan. The results of this study show that the mis-closures between the two points at University of Incheon and Suwon/Seoul stations of NGI(National Geography Institute), Seoul stat ion of KAO, and Incheon station of MOGAHA(Ministry Of Government Administration and Home Affairs) are 0.0206m, 0.0118m, 0.0129m and 0.0024m respectively. It indicates that the analyzed mis-closures were less than the allowed values ill the primary/secondary control point specification for GPS surveying, i.e. a mis-closure less than 30mm for the distance less than 30km and a mis-closure less than $IPPM{\times}D(km)$ for the distance greater than 30km.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.542-549
• /
• 2009

Zr-based amorphous alloy matrix composites reinforced with tantalum continuous fibers were fabricated by the liquid pressing process, and their anisotropic mechanical properties were investigated by tensile and compressive tests of $0^{\circ}$(longitudinal)-, $45^{\circ}$-, and $90^{\circ}$(transverse)-orientation specimens. About 60 vol.% of tantalum fibers were homogeneously distributed inside the amorphous matrix, which contained a small amount of polygonal crystalline particles. The ductility of the tantalum-continuous-fiber-reinforced composite under tensile or compressive loading was dramatically improved over that of the monolithic amorphous alloy, while maintaining high strength. When the fiber direction was not matched with the loading direction, the reduction of the strength and ductility was not serious because of excellent fiber/matrix interfacial strength. Observation of the anisotropic deformation and fracture behavior showed the formation of multiple shear bands, the obstruction of crack propagation by fibers, and the deformation of fibers themselves, thereby resulting in tensile elongation of 3%~4% and compressive elongation of 15%~30%. These results suggest that the liquid pressing process was useful for the development of amorphous matrix composites with excellent ductility and anisotropic mechanical properties.

• The Journal of Internal Korean Medicine
• /
• v.45 no.2
• /
• pp.303-313
• /
• 2024

Introduction: We describe the effects of Sosiho-tang decoction and insulin combination therapy, as well as the effect of integrated traditional Korean medicine therapy, using continuous glucose monitoring (CGM) in a diabetic patient complaining of a range of diabetic symptoms. Case report: A 24-year-old female presented with symptoms of diabetes, including weight loss, thirst, and polyuria, and was diagnosed with type 2 diabetes through blood tests, endocrine tests, and autoantibody tests. During hospitalization, the patient received insulin therapy and Sosiho-tang decoction concurrently, achieving normal blood glucose levels. After discharge, adhering to the Sosiho-tang decoction and CGM enabled the insulin dosage to be gradually reduced while maintaining normal blood glucose levels. Conclusion: Combination therapy with insulin and Sosiho-tang rapidly reduced hyperglycemia in the short term. CGM post-discharge allowed for observation of the patient's blood glucose levels. Ultimately, Sosiho-tang medication lowered blood glucose levels, reduced insulin requirements, and facilitated a reduction in the insulin dosage.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.307-321
• /
• 2016

Planetary Boundary Layer Height (PBLH) is a major input parameter for weather forecasting and atmosphere diffusion models. In order to estimate the sub-grid scale variability of PBLH, we need to monitor PBLH data with high spatio-temporal resolution. Accordingly, we introduce a LIdar observation VEhicle (LIVE), and analyze PBLH derived from the lidar loaded in LIVE. PBLH estimated from LIVE shows high correlations with those estimated from both WRF model ($R^2=0.68$) and radiosonde ($R^2=0.72$). However, PBLH from lidar tend to be overestimated in comparison with those from both WRF and radiosonde because lidar appears to detect height of Residual Layer (RL) as PBLH which is overall below near the overlap height (< 300 m). PBLH from lidar with 10 min time resolution shows typical diurnal variation since it grows up after sunrise and reaches the maximum after 2 hours of sun culmination. The average growth rate of PBLH during the analysis period (2014/06/26 ~ 30) is 1.79 (-2.9 ~ 5.7) m $min^{-1}$. In addition, the lidar signal measured from moving LIVE shows that there is very low noise in comparison with that from the stationary observation. The PBLH from LIVE is 1065 m, similar to the value (1150 m) derived from the radiosonde launched at Sokcho. This study suggests that LIVE can observe continuous and reliable PBLH with high resolution in both stationary and mobile systems.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.208-218
• /
• 2012

Numerical simulation technique has been developed to calculate microwave backscattering from water surface. The simulation plays a role of a substitute for experiments. Validation of the simulation was shown by comparing with experimental results. Water area observations by microwave radar have been simulated to evaluate algorithms and systems. Furthermore, the simulation can be used to understand microwave scattering mechanism on the water surface. The simulation has applied to the various methods for water area observations, and the utilizations of the simulation are introduced in this paper. In the case of fixed radar, we show following examples, 1. Radar image with a pulse Doppler radar, 2. Effect of microwave irradiation width and 3. River observation (Water level observation). In addition, another application (4.Synthetic aperture radar image) is also described. The details of the applications are as follows. 1. Radar image with a pulse Doppler radar: A new system for the sea surface observation is suggested by the simulation. A pulse Doppler radar is assumed to obtain radar images that display amplitude and frequency modulation of backscattered microwaves. The simulation results show that the radar images of the frequency modulation is useful to measure sea surface waves. 2. Effect of microwave irradiation width: It is reported (Rheem[2008]) that microwave irradiation width on the sea surface affects Doppler spectra measured by a CW (Continuous wave) Doppler radar. Therefore the relation between the microwave irradiation width and the Doppler spectra is evaluated numerically. We have shown the suitable condition for wave height estimation by a Doppler radar. 3. River observation (Water level observation): We have also evaluated algorithms to estimate water current and water level of river. The same algorithms to estimate sea surface current and sea surface level are applied to the river observation. The simulation is conducted to confirm the accuracy of the river observation by using a pulse Doppler radar. 4. Synthetic aperture radar (SAR) image: SAR images are helpful to observe the global sea surface. However, imaging mechanisms are complicated and validation of analytical algorithms by SAR images is quite difficult. In order to deal with the problems, SAR images in oceanic scenes are simulated.