• Journal of Convergence for Information Technology
• /
• v.8 no.4
• /
• pp.115-120
• /
• 2018

This paper describes the design and trial development of a system that supports continuous hazard mapping by local residents in their daily life. We performed an interview survey to design our system in a model traditional town in Saga Prefecture, Japan. The results show that despite continued efforts, many practical problems remain and residents feel unsafe. Considering these results, we designed and developed a unique information and communication technology-based support system that contributes to community-based disaster prevention and reduction. The continuous resident participation and posting design are the core concept for our community-based approach. Our system continues to support making a hazard map by integrating the community-based hazard information. Local residents register information (disaster types, risk level, photographs, comments, positional information) about locations that could be dangerous in a disaster. In addition, our system enables information sharing through a Web server. We expect that this information sharing will allow local hazard information for each district to be used.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.5
• /
• pp.563-573
• /
• 2015

For hard rock subsea tunnels the most challenging rock mass conditions are in most cases represented by major faults/weakness zones. Poor stability weakness zones with large water inflow can be particularly problematic. At the pre-construction investigation stage, geological and engineering geological mapping, refraction seismic investigation and core drilling are the most important methods for identifying potentially adverse rock mass conditions. During excavation, continuous engineering geological mapping and probe drilling ahead of the face are carried out, and for the most recent Norwegian subsea tunnel projects, MWD (Measurement While Drilling) has also been used. During excavation, grouting ahead of the tunnel face is carried out whenever required according to the results from probe drilling. Sealing of water inflow by pre-grouting is particularly important before tunnelling into a section of poor rock mass quality. When excavating through weakness zones, a special methodology is normally applied, including spiling bolts, short blast round lengths and installation of reinforced sprayed concrete arches close to the face. The basic aspects of investigation, support and tunnelling for major weakness zones are discussed in this paper and illustrated by cases representing two very challenging projects which were recently completed (Atlantic Ocean tunnel and T-connection), one which is under construction (Ryfast) and one which is planned to be built in the near future (Rogfast).

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.60-67
• /
• 1997

CAD systems offer a variety of techniques for designing and rendering models of static 3D objects and even of mechanisms, but relatively few tools exist for interactively specifying arbitrary movements of rigid bodies through space. Such tools are essential, not only for artistic animation, but also, for planning and demonstrating assembly and disassembly procedure of manufactured products. A rigid body motion is a continuous mapping from the time domain to a set of positions. To relieve the designers from the burden of specifying this mapping in abstract mathematical terms, combinations of simple rigid motion primitives, such as linear translations or constant axis rotations, are often used. These simple motions are planar and thus ill-suited for approximating arbitrary motions in 3D-space. Instead, we propose the screw motion primitive, a special combination of linear translations and constant axis rotations, which has a simple geometric representation that can be automatically and unambiguously computed from the starting and ending positions of the moving body. Although, any two positions may be interpolated by an infinity of motions, we chose the screw motion for its relative generality and its computational advantages. The paper covers original algorithms for computing the screw motions from interpolated positions and envelopes of swept regions to predict collisions.

• Smart Structures and Systems
• /
• v.22 no.2
• /
• pp.201-207
• /
• 2018

This paper proposes a line laser thermography scanning (LLTS) system for multiple crack evaluation on a concrete structure, as the core technology for unmanned aerial vehicle-mounted crack inspection. The LLTS system consists of a line shape continuous-wave laser source, an infrared (IR) camera, a control computer and a scanning jig. The line laser generates thermal waves on a target concrete structure, and the IR camera simultaneously measures the corresponding thermal responses. By spatially scanning the LLTS system along a target concrete structure, multiple cracks even in a large scale concrete structure can be effectively visualized and evaluated. Since raw IR data obtained by scanning the LLTS system, however, includes timely- and spatially-varying IR images due to the limited field of view (FOV) of the LLTS system, a novel time-spatial-integrated (TSI) coordinate transform algorithm is developed for precise crack evaluation in a static condition. The proposed system has the following technical advantages: (1) the thermal wave propagation is effectively induced on a concrete structure with low thermal conductivity of approximately 0.8 W/m K; (2) the limited FOV issues can be solved by the TSI coordinate transform; and (3) multiple cracks are able to be visualized and evaluated by normalizing the responses based on phase mapping and spatial derivative processes. The proposed LLTS system is experimentally validated using a concrete specimen with various cracks. The experimental results reveal that the LLTS system successfully visualizes and evaluates multiple cracks without false alarms.

• Journal of Environmental Impact Assessment
• /
• v.19 no.6
• /
• pp.573-581
• /
• 2010

Natural ecosystem is an essential part to connect with the plan for biodiversity conservation in response strategy against climate change. For connecting biodiversity conservation with climate change strategy, Europe, America, Japan, and China are making an effort to discuss protection necessity through national biodiversity valuation but precedent studies lack in Korea. In this study, we made biodiversity maps representing biodiversity distribution range using species richness in National Forest Inventory (NFI) and Forest Description data. Using regression tree algorithm, we divided various classes by decision rule and constructed biodiversity maps, which has accuracy level of over 70%. Therefore, the biodiversity maps produced in this study can be used as base information for decision makers and plan for conservation of biodiversity & continuous management. Furthermore, this study can suggest a strategy for increasing efficiency of forest information in national level.

• Journal of Plant Biotechnology
• /
• v.39 no.3
• /
• pp.169-174
• /
• 2012

Quantitative trait loci (QTLs), which were related to the ability of callus induction and plant regeneration in seed culture of rice, were analyzed using a mapping population from a cross between the rice cultivars 'Samgang' (tongil type) and 'Nagdong' (japonica). A tongil type rice cultivar, 'Samgang' showed lower frequency (20%) of plant regeneration than that (35%) of japonica rice, 'Nagdong'. Transgressive segregations were observed for the ability of callus induction and plant regeneration from the seed-derived calli of 58 doubled haploid (DH) lines. The ability of plant regeneration of 58 doubled haploid lines showed a continuous distribution with comparatively wide range (10.0 to 66.7%) of variation. Composite interval mapping analysis was used to identify the QTLs controlling callus induction and plant regeneration ability. Four significant QTLs, qCWS6, qCWS8, qCWS9 and qCWS11, associated with callus weight per seed were detected on chromosomes 6, 8, 9, and 11 with LOD values of 3.30, 2.60, 2.70 and 2.43, explaining 36% of the total phenotypic variation. Three significant QTLs, qPR1, qPR6, and qPR11, for the ability of plant regeneration were located on chromosome 1, 6, and 11 at LOD score of 2.25, 2.15 and 2.55, accounting for 24 % of the total phenotypic variation. The present study should be useful for improving the efficiency of plant regeneration in tissue culture of indica rice by means of marker-assisted selection.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.2
• /
• pp.83-94
• /
• 2003

Let K be a nonempty closed convex subset of a real Hilbert space H. Approximation solvability of a system of nonlinear variational inequality (SNVI) problems, based on the convergence of projection methods, is given as follows: find elements $x^*,\;y^*{\in}H$ such that $g(x^*),\;g(y^*){\in}K$ and $$<\;{\rho}T(y^*)+g(x^*)-g(y^*),\;g(x)-g(x^*)\;{\geq}\;0\;{\forall}\;g(x){\in}K\;and\;for\;{\rho}>0$$ $$<\;{\eta}T(x^*)+g(y^*)-g(x^*),\;g(x)-g(y^*)\;{\geq}\;0\;{\forall}g(x){\in}K\;and\;for\;{\eta}>0,$$ where T: $H\;{\rightarrow}\;H$ is a relaxed $g-{\gamma}-r-cocoercive$ and $g-{\mu}-Lipschitz$ continuous nonlinear mapping on H and g: $H{\rightarrow}\;H$ is any mapping on H. In recent years general variational inequalities and their algorithmic have assumed a central role in the theory of variational methods. This two-step system for nonlinear variational inequalities offers a great promise and more new challenges to the existing theory of general variational inequalities in terms of applications to problems arising from other closely related fields, such as complementarity problems, control and optimizations, and mathematical programming.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.1053-1067
• /
• 2018

This paper uses a probability-based approach to study the spatial relationships between landslides and their causative factors in the Mingchukur area, Bostanlik districts of Tashkent, Uzbekistan. The approach is based on digital databases and incorporates methods including probability analysis, spatial pattern analysis, and interactive mapping. First, an object-oriented conceptual model for describing landslide events is proposed, and a combined database of landslides and environmental factors is constructed by integrating various databases within a unifying conceptual framework. The frequency ratio probability model and landslide occurrence data are linked for interactive, spatial evaluation of the relationships between landslides and their causative factors. In total, 15 factors were analyzed, divided into topography, hydrology, and geology categories. All analyzed factors were also divided into numerical and categorical types. Numerical factors are continuous and were evaluated according to their $R^2$ values. A landslide susceptibility map was constructed based on conditioning factors and landslide occurrence data using the frequency ratio model. Finally, the map was validated and the accuracy showed the satisfactory value of 83.3%.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.239-251
• /
• 2016

Hyperspectral image is widely used for land cover classification because it has a number of narrow bands and allow each pixel to include much more information in comparison with previous multi-spectral image. However, Higher spectral resolution of hyperspectral image results in an increase in data volumes and a decrease in noise efficiency. SAM(Spectral Angle Mapping), a method based on vector inner product to compare spectrum distribution, is a highly valuable and popular way to analyze continuous spectrum of hyperspectral image. SAM is shown to be less accurate when it is used to analyze hyperspectral image for land cover classification using spectral library. this inaccuracy is due to the effects of atmosphere. We suggest a decision tree based method to compensate the defect and show that the method improved accuracy of land cover classification.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.88-91
• /
• 1994

It is well known that multipoint and computerized intraoperative mapping systems improve the results of surgery for Wolff-Parkinson-White syndrome and show tremendous potential for opening an entirely new era of surgical intervention for the more common and lethal types of supraventricular tachyarrhythmias such as atrial flutter and atrial fibrillation. In addition, the ability to map and ablate the sometimes fleeting automatic atrial tachycardia is greatly enhanced by computerized mapping systems. In this study, we have developed 64 channel computerized data analysis system using microcomputer (Macintosh IIx) for basic research of electrophysiology and electrical propagation. The bipolar electrogram information is acquired from 64 cardiac sites simultaneously at a sampling rate of 1ksamples/sec with continuous and total data storage of up to 30 seconds. When the reference electrogram is selected and reference point is picked up, delay time from the reference point in displayed on two dimensional diagram of the heart. System design permits easy expansion to almost 256 simultaneous sites, This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.