• Clean Technology
• /
• v.4 no.1
• /
• pp.6-23
• /
• 1998

Recently, semiconductor industry has grown rapidly because of the large demand for electronic devices and equipment. The semiconductor industries have also played an important role on the economic growth in Korea. As the environmental regulations become strict, the proper environmental management and the well-developed waste minimization technologies in semiconductor industries are two of urgent problems to be solved. The semiconductor manufacturing process consists of a series of continuous chemical processes, such as cleaning, oxidation, diffusion, photolithography, etching and film deposition. During the processes, various environmentally hazardous wastes are produced. The wastes may be classified as wastewater, gaseous pollutants, and solid wastes. For waste minimization, the substitution of raw materials and process optimization techniques are used, while the selective destruction technologies of toxic chemicals contained in the wastes have been reported. Also, new technologies have been developed for source reduction and waste reduction, such as reduction of toxic chemical use and substitution of hazardous liquids with gaseous reactants or solvent.

• Journal of the Korean Dietetic Association
• /
• v.26 no.3
• /
• pp.183-195
• /
• 2020

Endocrine-disrupting chemicals (EDCs) are chemicals present in the environment that interfere with the normal hormone functions of various organisms and cause genetopathy, deformities, or cancer. This study surveyed the awareness of EDCs with 242 cooking staff at 242 meal service facilities for children located in a part of Gyeonggi Province. To minimize infants' exposure to EDCs, the subjects were provided with information on EDCs for two months. The behavior of reducing exposure to EDCs was analyzed according to the awareness of EDCs and work ethics. In addition, the effects before and after being provided with the information were evaluated. According to the results, the levels of awareness of EDCs and work ethics' scores of the cooking staff were high with 3.95 and 4.39 points, respectively, out of five points. In addition, a higher awareness of EDCs and a higher work ethics' score were associated with an improved behavior of reducing exposure to EDCs (P<0.05). The overall cooking and cleaning behavior for reducing exposure to EDCs showed improvement after providing information (P<0.01). Therefore, these results suggest that it is important to provide continuous education to enhance the awareness of EDCs, work ethics, and behavior to reduce exposure to EDCs.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.517-526
• /
• 2018

In order to remove pollutants from the soil in the Ka-hak mine site, this study investigates optimization of the acid washing conditions for the soil. The soil at the site is presumed to be contaminated by diffused heavy-metal-contaminated tailings. The major heavy metal pollutants in the soil are copper, lead, and zinc. Gravels larger than 5mm in size constitute approximately 38% of the soil, and these are the least polluted by heavy metals. On the other hand, it is difficult to reduce the concentration of heavy metals in fine soils, particularly those whose sizes are less than 0.075 mm. The results of the continuous process using a hydro-cyclone show that fine soil particles consisting of at least 20% of the raw soil must be separated before the chemical soil washing process in order to achieve reliable cleaning.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.4
• /
• pp.441-453
• /
• 2021

Objectives: This study identified problems and improvements in projects targeted to dental workers in a child-adolescent dental care service. Methods: The subjects were 40 dentists, 43 dental hygienists, and 51 others who participated in service in Seoul. A self-administered questionnaire was used to address the problems and improvements in the project. Descriptive statistics, chi-square test, and one-way analysis of variance were performed using SPSS 23.0. Results: Oral examination was performed by 99.2% of dentists, and some service items such as professional tooth cleaning, fluoride application, and scaling were performed by dental auxiliary personnel regardless of legal duties. The problem was that the subjects took a lot of time in providing services, and students or guardians participating in the project refused to receive preventive dental services. As regards improvements, the insurance fee was the highest (48.1%), followed by the provision of regular services (38.8%), and system improvement and administrative support (35.7%). Conclusions: To activate a child-adolescent dental care service, it is thought that continuous efforts such as providing financial support by the government, education to increase participants' understanding, and social consensus for the participation of service providers and beneficiaries are required.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.315-320
• /
• 2021

To analyze prevalence of mycotoxins, a total of 74 feedstuff samples were collected from silos (n=37) and hoppers (n=37) in nine pig farms. Six mycotoxins were tested with commercialized ELISA kits. All samples were contaminated with four or more mycotoxins. Zearalenone was detected in all of the tested samples. Ochratoxin, deoxynivalenol and H-2/HT-2 toxin were detected in more than 90% of the samples. And also, fumonisin was positive in 89.2% of the samples from the silos, 75.2% from the hoppers, respectively. On the other hand, aflatoxin was detected in about 40% of the samples. When the behavior of lactating sows was observed, possible mycotoxicosis was suspected. It was confirmed that their feedstuffs were contaminated with high levels of mycotoxins such as ochratoxin and T-2/HT-2 toxin. After cleaning the feedline, the clinical symptoms in sows suspected with mycotoxicosis were disappeared. Although mycotoxin concentration in most of the feedstuffs was below the acceptance level, these data indicate that what are required is more monitoring and continuous management for mycotoxins in pig feedstuffs.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.433-441
• /
• 2021

The aim of this study was to optimize the ozonation and ceramic membrane integrated process for greywater reclamation. The integrated process is a repeated sequential process of filtration and backwash with the same ceramic membrane. Also, this study used ozone and oxygen gas for the backwashing process to compare backwashing efficiency. The study results revealed that the optimum filtration and backwash time for the process was 10 minutes each when comparing the filtrate flow and membrane recovery rate. The integrated process was operated at three different operating conditions with i) 10 minutes for filtration and 10 minutes for ozonation, ii) 10 minutes for filtration and 10 minute for oxygen aeration, and iii) continuous filtration without any aeration for synthetic greywater. The integrated process with ozone backwashing could produce 0.55 L/min of filtrate with an average of 18.42% permeability recovery, while the oxygen backwashing produced 0.47 L/min and 6.26%, respectively. And without any backwashing, the integrated process could produce 0.29 L/min. This shows that the ozone backwash process is capable of periodically recovering from membrane fouling. The resistance of the fouled membrane was approximately 34.4% for the process with ozone backwashing, whereas the resistance was restored by 10.8% for the process with oxygen backwashing. Despite the periodical ozone backwashing and chemical cleaning, irreversible fouling gradually increased approximately 3 to 4%. Approximately 97.6% and 15% turbidity and TOC were removed by ceramic membrane filtration, respectively. Therefore, the integrated process with ozonation and ceramic membrane filtration is a potential greywater treatment process.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2012

In this study, $CO_2$ adsorbent was developed for removing low concentration of $CO_2$ in multiple-use facilities. The efficiency of the adsorbent which was improved selective $CO_2$ adsorption capabilities was evaluated. The pellet type adsorbent was modified from a commercial zeolite with mixing LiOH, binder, additives, and $H_2O$. Column tests showed over 90 % of $CO_2$ was adsorbed within 400min. Chamber tests including batch and continuous types were performed for evaluating the adsorbent module. By batch tests, it was evaluated that about 92% of $CO_2$ was removed within 30 min. By continuous tests, 70% of $CO_2$ was removed within 30 min. It was analyzed that over 2,500 ppm of $CO_2$ was continuously removed as shown chamber tests. The reproducibility tests repeatedly performed for 15 days shows that over 1,000 ppm of $CO_2$ was continuously removed. Adsorption capacity of the developed adsorbent was 5.0mmol $CO_2/g$ adsorbent which was analyzed by TGA. It was estimated that the modified adsorbent was applicable to low $CO_2$ concentration and low temperature of indoor environment.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.379-385
• /
• 2010

The purpose of this study was to examine the oral health knowledge and oral health practice of teachers in early childhood education institutions. The subjects in this study were 169 teachers who worked in early childhood education institutions. After a survey was conducted, the collected data were analyzed with a SPSSWIN 14.0 program. The findings of the study were as follows: 1. Concerning oral health knowledge, they got a mean of 7.97(9), 2.66(3), 2.86(5), 2.42(5) and 1.04(2) respectively in knowledge on dental caries, toothbrushing, periodontitis, fluoride and diet. Overall, they got a mean of 16.98 in 24 items, and the score corresponded to approximately 70 out of 100 points. 2. As for oral health practice, tongue cleaning(4.22) was what they did the most to take care of their oral health, and they just got 2.60 in regular dental checkup. Overall, they got about 3.11 in oral health practice. 3. Regarding relationship between general characteristics and oral health knowledge, the teachers who were in their 30s got 17.47 in overall oral health knowledge, and those with a career of five to less than 10 years got 17.50. The teachers who received college or higher education got 17.27, and the principals got 18.26. Those who had ever received education on oral health got 17.01. But the gaps between them and the others were not statistically significant. 4. As to connections between general characteristics including age and oral health practice, restricted sugar intake, regular dental checkup, the use of oral hygiene supplies, tongue cleaning and overall oral health practice were more prevailing among the older teachers, and the gaps between them and the younger teachers were statistically significant. 5. In terms of relationship between oral health knowledge and oral health practice, there was no statistically significant relationship between the two on the whole, but better oral health knowledge led to better oral health practice in each part. This study shows that various oral health education programs for the kindergarten teachers should be developed and continuous education through the programs is important to improve the knowledge of oral health and to change oral health behavior.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1400-1418
• /
• 2020

In the development of commercial promotion, chatbot is known as one of significant skill by application of natural language processing (NLP). Conventional design methods are using bag-of-words model (BOW) alone based on Google database and other online corpus. For one thing, in the bag-of-words model, the vectors are Irrelevant to one another. Even though this method is friendly to discrete features, it is not conducive to the machine to understand continuous statements due to the loss of the connection between words in the encoded word vector. For other thing, existing methods are used to test in state-of-the-art online corpus but it is hard to apply in real applications such as telemarketing data. In this paper, we propose an improved chatbot design way using hybrid bag-of-words model and skip-gram model based on the real telemarketing data. Specifically, we first collect the real data in the telemarketing field and perform data cleaning and data classification on the constructed corpus. Second, the word representation is adopted hybrid bag-of-words model and skip-gram model. The skip-gram model maps synonyms in the vicinity of vector space. The correlation between words is expressed, so the amount of information contained in the word vector is increased, making up for the shortcomings caused by using bag-of-words model alone. Third, we use the term frequency-inverse document frequency (TF-IDF) weighting method to improve the weight of key words, then output the final word expression. At last, the answer is produced using hybrid retrieval model and generate model. The retrieval model can accurately answer questions in the field. The generate model can supplement the question of answering the open domain, in which the answer to the final reply is completed by long-short term memory (LSTM) training and prediction. Experimental results show which the hybrid word vector expression model can improve the accuracy of the response and the whole system can communicate with humans.