• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.478-483
• /
• 2005

This paper presents the comparison analysis of a Journal and thrust FDB (fluid dynamic bearing) and a conical FDB in a HDD spindle motor. The Reynolds equation is appropriately transformed to describe journal, thrust and conical bearing. Finite element method is applied to analyze the FDB by satisfying the continuity of mass and pressure at the interface between the hearings. The pressure field of the bearings is numerically approximated by applying the Reynolds boundary condition. The load and friction torque are obtained by integrating the pressure and the velocity gradient along the fluid film. The flying height of the spindle motor is measured to verify the proposed analytical result. This research shows that the conical bearing generates bigger load capacity and less friction torque than the journal and thrust bearing in a HDD spindle motor.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.185-193
• /
• 1997

The order of the stress singularity that occurs at the termination of an interface between materials exhibiting bilinear stress-strain response under plane strain conditions has been calculated, The governing equation of elasticity together with traction-free boundary condition and interface continuity condition defines a two-point boundary value problem. The stress components near the free edge are assumed to be proportional to r/sup s-1/, with solutions existing only for certain values of s. Finding these values entails the solution of an eigenvalue problem. Because it has been impossible to integrate the differential equations analytically, the integration has been performed numerically with a shooting method coupled with a Newton improvement scheme.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.94-104
• /
• 2002

This paper presents a new way of texture mapping on the Genus N object constructed over a single domain. The problem of 2D texture mapping is the discontinuity of texture domain at the virtual boundary on the object. Such phenomenon decreases smoothness of the object as well as looks unnatural. Especially it is necessary for the Genus N object of infinite coninuity to apply the seamless texture mapping. For seamless texture mapping, a multiperiodic function, which transforms a discontinuous function into a continuous function, is suggested. In some applications, however, the visual seams on the textured object provide more realistic appearance. Therefore, this research supports the interactive control from the discontinuity and the continuity across the boundary using the coefficient of the weight function.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.28-37
• /
• 2002

In this paper, we propose new methods used in MPEG codec that can improve the picture quality degradations of the reconstructed images, such as blocking artifacts, without additional computations. At first, a new 2-step MAD motion search is presented in the motion search and compensation course to reduce the computations and the errors of block boundary pixels. And we also present an overlapped 2-step MAD motion search that use the pixels beyond the block boundary using the reduced computations. In DCT/quantization course for intra-blocks, 1-D DCT predictive quantization and pixel difference predictive quantization, those use the adjacent pixel sets of the Previously reconstructed blocks and improve the inter-block continuity, are presented. As simulation results, proposed methods shows better picture qualities by reducing blocking artifacts than that of the conventional MPEG.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.487-495
• /
• 2007

When error occurs during the network transmission of the image, the quality of the restored image is very serious. Therefore to maintain the received image quality, the error concealment technique is necessary. This paper presents an efficient spatial error concealment method using adaptive edge-oriented interpolation. It deals with errors on slice level. The proposed method uses boundary matching method having 2-step processes. We divide error block into external and internal region, adaptively restore each region. Because this method use overall as well as local edge characteristics, it preserves edge continuity and texture feature. The proposed technique reduces the complexity and provide better reconstruction quality for damaged images than the previous methods.

• The Journal of Korean Philosophical History
• /
• no.29
• /
• pp.179-202
• /
• 2010

In addition to the emphasis on filial piety ethics in everyday life, filial piety obtained a further significance in Confucianism which had the strong sense of ancestor worship. This paper focuses on filial piety as a mechanism of continuity within Confucianism and points out that it owed its development to its connection to agricultural culture. The sedentary life with less mobility forged a relative intimacy among people and filial piety was the actual expression of that kind of intimate affection. Yet, filial piety in Confucianism created a unique culture in terms that it not only stipulated material and emotional support for parents but also expected one's piety to the further ancestors through a memorial service and made its connection to the infinite posterity through sons. From the perspective of Confucianism that established filial piety at the turning point from life to death, the self existing in present was not an isolated self anymore. Yet, one can see another characteristic of Confucianism from that filial piety, based on blood bonds, could move beyond paternalism to broaden itself. It could be expanded to the care for strangers. The aged experience and wisdom through agricultural life begot the insight that the nature made its infinite connections with everything through circulation. As a stone thrown in a pond would enlarge its boundary by drawing larger and larger concentric circles, this thought enabled people to enlarge their affection to their parents to universal humanity. In this enlarged network, though it was natural to make distinctions between the closer and the farther, Confucianism sought to overcome it by establishing oneself upright. Confucianism emphasized the moral cultivation with its filial piety concept that contained the diachronic thought penetrating life and death and the broadened perspective relating everything around. In Confucianism, filial piety provided an important medium in forming a moral subject that penetrated life and death and related self and others. Inherent in it is the Confucius thought of continuity that searched for a paragon of a moral human being regardless of time and space.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.295-300
• /
• 2012

Reflection coefficients of wave due to the types of a submerged breakwater on the inclined incident wave are numerically computed by using boundary element method. The analysis method is based on the wave pressure function with the continuity in the analytical region including fluid and structures. When compared with the existing results on the inclined incident wave, the results of this study show good agreement. It is found that both maximum and minimum values of the reflection coefficient are appeared frequently, as the width of a submerged breakwater becomes wider, and the reflection coefficient increase, as the wave period is longer. In addition, the effect on the reflection coefficient due to the change of submerged breakwater hight is lager than that due to the change of submerged breakwater width. The results indicate that dissipating characteristics of wave due to the types of a submerged breakwater own high dependability regarding the change of inclined incident waves. Therefore, the results of this study is estimated to be applied as an accurate numerical analysis referring to inclined incident waves in real sea.

• Structural Engineering and Mechanics
• /
• v.68 no.5
• /
• pp.603-619
• /
• 2018

In this research, an effective computational technique is carried out for nonlinear and post-buckling analyses of cracked imperfect composite plates. The laminated plates are assumed to be moderately thick so that the analysis can be carried out based on the first-order shear deformation theory. Geometric non-linearity is introduced in the way of von-Karman assumptions for the strain-displacement equations. The Ritz technique is applied using Legendre polynomials for the primary variable approximations. The crack is modeled by partitioning the entire domain of the plates into several sub-plates and therefore the plate decomposition technique is implemented in this research. The penalty technique is used for imposing the interface continuity between the sub-plates. Different out-of-plane essential boundary conditions such as clamp, simply support or free conditions will be assumed in this research by defining the relevant displacement functions. For in-plane boundary conditions, lateral expansions of the unloaded edges are completely free while the loaded edges are assumed to move straight but restricted to move laterally. With the formulation presented here, the plates can be subjected to biaxial compressive loads, therefore a sensitivity analysis is performed with respect to the applied load direction, along the parallel or perpendicular to the crack axis. The integrals of potential energy are numerically computed using Gauss-Lobatto quadrature formulas to get adequate accuracy. Then, the obtained non-linear system of equations is solved by the Newton-Raphson method. Finally, the results are presented to show the influence of crack length, various locations of crack, load direction, boundary conditions and different values of initial imperfection on nonlinear and post-buckling behavior of laminates.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• Journal of the Korean Society of Radiology
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2008

The present study proposed a method that dissolves ultrasonographic images into multiple resolutions using wavelet conversion and a boundary detection filter and improves the quality of ultrasonographic images through boundary detection filtering. In order to reduce noises and strengthen edges, the proposed method adjusted selectivity coefficient by area step by step from a low resolution image obtained from wavelet converted images to a high resolution image and performed edge filtering in consideration of direction. Through this method, we generated a selective low pass filtering effect in areas except edges by decreasing the wavelet coefficient for pixels in spot areas, improved continuity by smoothing edges in the tangential direction, and enhanced contrast by thinning in the normal direction. Through an experiment, we compared the filtering method using a non linear anisotropic expansion model and the filtering method using wavelet contraction structure in single resolution.