• Computers and Concrete
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2018

Establishment of test methods to assess the fresh properties of self-compacting concrete (SCC) are required to ensure the homogeneity in fresh and hardened states. This paper discusses the suitability of a simple test method for assessing the slump flow and stability of SCC by testing on self-compacting mortar (SCM) fraction. The proposed test method aims at investigating slump flow diameter test and sieve stability test of SCC by testing SCM fraction with a plunger penetration apparatus. A central composite modeling design was performed to evaluate the effects of water/cement ratio (W/C), superplasticizer dosage (SP) and powder marble content (MP) on slump flow diameter, stability and plunger penetration test of fresh SCC. The responses of the derived statistical models are slump flow (Sf), sieve stability (S) and plunger penetration (P). Relationships obtained in this study show acceptable correlations between plunger penetration test value and slump flow diameter test results and stability. It should note that the developed relationships are very useful to predict slump flow diameter and stability of studied SCC mixtures by carrying out a simple plunger penetration test on its mortar, which can save labour and time in laboratory experiments.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.28-33
• /
• 2019

In this study, the flow analysis of fermentation tank, digester and dryer, which are the main equipment in environmental energy facilities, was carried out. Numerical analysis was carried out with the size of the actual plant, and 3D modeling program CATIA V5 R16, grid generation program Gambit, and general purpose flow analysis package ANSYS-FLUENT (v13) were used. Simulation results of the carrier gas flow analysis in the STD dryer using the computational fluid dynamics program showed that the carrier gas smoothly circulated between the shells of the dryer and the flow was uniformly distributed without stagnation or flow. It is also predicted that rotational flow due to shell rotation is active. The average flow velocity of carrier gas in the STD dryer was estimated to be about 0.196m / s, and the average temperature of the carrier gas was calculated to be 424K. Due to the relatively slow carrier gas velocity and high average temperature, the water content of the sludge can be effectively lowered.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.165-176
• /
• 2012

Despite the gradual growth of mobile markets according to an increased mobile distribution rate, empirical studies on the mobile shopping application markets are not sufficient. From the viewpoint of a large number of purchase of brand product in department store by customers and a high growth rate of mobile shopping by means of mobile shopping, we classified a principle variable, the interactivity, into three levels and verified the effects of the interactivity on the flow, effects of the flow on the purchase intention and the control effect of purchase level. In conclusion, among the three levels of the interactivity the customer-customer interactivity and the content-customer interactivity have positive effects on the flow, but company-customer has not. On the other hand, the customer-customer interactivity and the content-customer interactivity have a positive effect on the flow. Furthermore, the flow affects the purchase intention positively. After the verification of the direct effect of interactivity on the purchase intention, the content-customer interactivity only has a positive effect on the purchase intention. Lastly, the purchase level has a control effect when the customer-customer interactivity has a positive effect on the flow.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.4
• /
• pp.53-63
• /
• 2021

Objective : This study aimed to develop a Korean version of the Flow State Scale for Occupational Task (K-FSSOT), to measure the level of a flow experience of a subject in occupational therapy activities. Methods : To develop a measure of K-FSSOT, validity and reliability were verified through a systematic development process. The validity was verified by calculating the content validity index (CVI) through the content validity of 10 occupational therapists and a question-and-answer survey of 20 patients. Reliability was verified by investigating the internal consistency and examination-re-test reliability of 33 patients. Results : The item-CVI for each question in the content feasibility study was .90 to 1.00, and the scale-CVI, which is the average of the whole item, was found to be appropriate at .97. The verification of reliability indicated that the intrinsic value of the entire question was high at .855, and the test-retest reliability value was high at .894 (p<.01), showing a high correlation, and very high reliability. Conclusion : K-FSSOT could be used as a useful tool to measure the level of a flow experience of the target in performing occupational therapy activities for occupational therapists concerned about the participation and flow experience of the target.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.735-745
• /
• 2013

The emergence of Web 2.0 technologies, such as blogs and wiki, enable even naive users to easily create and share content on the Web using freely available content sharing tools. Wide availability of almost free data and promiscuous sharing of content through social networking platforms created a content borrowing phenomenon, where the same content appears (in many cases in the form of extensive quotations) in different outlets. An immediate side effect of this phenomenon is that identifying which content is re-used by whom is becoming a critical tool in social network analysis, including expert identification and analysis of information flow. Internet-scale reuse detection, however, poses extremely challenging scalability issues: considering the large size of user created data on the web, it is essential that the techniques developed for content-reuse detection should be fast and scalable. Thus, in this paper, we propose a $qSign_{lsh}$ algorithm, a mechanism for identifying multi-sentence content reuse among documents by efficiently combining sentence-level evidences. The experiment results show that $qSign_{lsh}$ significantly improves the reuse detection speed and provides high recall.

• International Journal of Concrete Structures and Materials
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2008

This study investigates the spalling properties of high strength concrete designed with various types of mineral admixture and diverse content ratios of polypropylene (PP) fiber. Experimental factors considered in series I are four pozzolan types of mineral admixture and series II consists of three shrinkage reducing types of mineral admixture. PP fiber was added 0.05, 0.10 and 0.15vol. % in each mixture of series I and series II, so that totally 27 specimens including control concretes in each series were prepared. Test results showed that the increase of fiber content decreased the slump flow of fresh concrete and increased or decreased the air content depending on the declining ratio of slump flow. For the properties of compressive strength, all specimens were indicated at around 50 MPa, which is high strength range; especially all specimens in series II were 60 MPa. Fire test was conducted in standard heating curve of ISO 834 with ${\phi}100{\times}200\;mm$ size of cylinder moulds for 1 hour. The specimens incorporating silica fume exhibited severe spalling and most specimens without the silica fume could be protected from the spalling occurrence in only 0.05vol % of PP fiber content. This fire test results demonstrated that the spalling occurrence in high strength concrete was not only affected by concrete strength related to the porosity of microstructure but also, even more influenced by micro pore structure induced by the mineral admixtures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2680-2696
• /
• 2018

The collaborative content caching system is an effective solution developed in recent years to reduce transmission delay and network traffic. In order to decrease the service end-to-end transmission delay for future 5G ultra-dense networks (UDN), this paper proposes a novel service migration method that can guarantee the continuity of service and simultaneously reduce the traffic flow in the network. In this paper, we propose a service migration optimization model that minimizes the cumulative transmission delay within the constraints of quality of service (QoS) guarantee and network condition. Subsequently, we propose an improved firefly algorithm to solve this optimization problem. Simulation results show that compared to traditional collaborative content caching schemes, the proposed algorithm can significantly decrease transmission delay and network traffic flow.

• Cross-Cultural Studies
• /
• v.39
• /
• pp.407-432
• /
• 2015

This study focuses on the flow of story and content or related context when using movies as learning materials in a class. A great advantage of using movies is that they have a consistent story and detailed content development. Most teachers, however, tend to concentrate on practical expressions totally unrelated to the story or context of the movie they are using. This way might be efficient in the short run but it is certain that the expressions are unlikely to be retained in long-term memory. This study examines how a story-centered class influences learning of practical expressions and how efficient this approach to learning is. Learning and teaching with focus only on the expressions in a movie shades the meaning of the use of the movie a little. In this study the movie, Cars 2, was used in a course of general education with 150 students enrolled. Various group activities were suggested to immerse students into the story and contents of Cars 2. It was found that a story-centered class is helpful for students to acquire practical expressions and that students' satisfaction level with the class was high.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.41-47
• /
• 2017

Recent studies have shown that there are various systems which can be used to monitor hazardous area in a debris flow location, but lack of methodological research on the exact location where each instrument should be installed has hindered the success of this systems. The objective of this study is to suggest the measurement system for monitoring debris-flow and propose the effective method to determine location of measurement system. Previously studied, from 1991 to 2015, were referred and the applied ratio of every instrument was investigated. The measurement information was divided into 8 categories including rainfall, debris-flow velocity, displacement, fluid pore pressure, ground vibration, image processing, impact force and peak flow depth. The result of this study revealed that the most applied instruments to be rain gauge and geophone for measuring average rainfall and ground vibration respectively. The Analytic Hierarchical Process (AHP) method was selected to determine installation location of instrument and the weighting factors were estimated through fine content, soil thickness, porosity, shear strength, elastic modulus, hydraulic conductivity and saturation. The soil thickness shows highest weights and the fine content relatively demonstrates lowest weights. The score of each position can be calculated through the weighting factors and the lowest score position can be judged as the weak point. The weak point denotes the easily affecting area and thus, the point is suitable for installing the measurement system. This study suggests a better method for safely managing the debris-flow through a precise location for installing measurement system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.157-158
• /
• 2007

This is an interior design for a furniture & lighting design exhibition. The concept of design is to secure the smooth flow planning of an audience and effective direction of an exhibit Design content include 1) installation(passage of light) to guide an audience from entrance to right side of the exhibition space to prohibit the flow dispersion and keep smooth continual circulation flow plan 2)image-wall to introduce exhibition 3)installation to help the global understanding of exhibit 4)exhibition stand design considering proper height of audience's eye.