• 펄프종이기술
• /
• 제40권5호
• /
• pp.36-41
• /
• 2008

Multi-ply sheet forming has many advantages including the possibility of using wide range of materials in a given structure, lowering production cost, making higher grammage products and so on. But, incorrect structure of sheet makes flow resistance higher so that it shows poor dewatering in press section. One of major factors that affect sheet structure and dewatering property is fines content in each layer. We, therefore, examined the press dewatering of multi-ply sheet that has the different fines content in each layer and the effect of fines distribution on physical properties of sheet to find a technology for optimum utilization of raw materials. In case of two layered sheet, the sheet which was composed of layers with the different flow resistance showed higher dewatering rate than one which has the same flow resistance. And the more difference in fines content for layers existed, the more dewatering occurred. For three layered sheets, dewatering is mainly dependent on fines content of bottom layer. Strength properties were affected by dewatering degree and multi-ply sheet structure.

• 한국식품저장유통학회지
• /
• 제31권2호
• /
• pp.199-209
• /
• 2024

This study explored how temperature, time, and moisture content affect the rheological properties (apparent viscosity, flow behavior index, and consistency coefficient) of stored tomato and pepper purees. These purees were prepared with moisture contents of 85%, 90%, and 95% (w/v) using the hot-break method and tested over 6 days at 2-day intervals and temperatures of 5℃, 10℃, and 15℃. Results displayed distinct ranges for apparent viscosity, consistency coefficient, and flow behavior indices: tomato puree (2,519.9-4,324.6 mPa·s, 258.0-550.6 mPa·Sn, 1.80-0.48) and pepper puree (2,105.6-4,562.0 mPa·s, 268.4-580.4 mPa·Sn, 0.22-0.48). The temperature and storage time had significant (p≤0.05) effects, but moisture content did not affect these properties. Flow behavior and consistency coefficients demonstrated relative variation with apparent viscosity, indicating pseudoplastic behavior. Optimal processing and storage conditions were identified within specific ranges: 13.21-14.42℃ for 2 days with 92.22-94.23% (w/v) moisture content for pepper, and 8.42-11.77℃ for 2-6 days with 85% (w/v) moisture for tomato.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.55-67
• /
• 2004

In this paper, the flowability, strengths, impact resistance and sulfuric acid resistance of steel fiber reinforced high performance concrete (SFHPC) for the steel fiber content and fly ash and blast furnace slag as admixtures were presented. For evaluating flowability particularly, tests of slump flow, box-type passing ability and L-type filling ability were performed. The slump flow of SFHPC was some decreased with increase of the steel fiber content. At the box-type passing ability, the difference of box height of SFHPC is greatly increased with increasing the fiber content. The L-type filling ability of SFHPC was not excellent above $0.75\% of the steel fiber content. Also, the compressive strength of SFHPC was decreased with increase of the steel fiber content, but the flexural strength of SFHPC was much higher than that of the concrete without the steel fiber. At the impact resistance, drop number of SFHPC for reaching final fracture was increased with increase of the fiber content. Also, the drop number for reaching initial fracture of lmm was increased with increase of the fiber content. At the sulfuric acid resistance, 4-week weight change of SFHPC with the steel fiber was almost similarity that of HPC without the steel fiber and was in the range of 73.6 to 81.5.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.91-95
• /
• 2000

8인치 쵸크랄스키 실리콘 단결성 성장에 있어서, 계면에서의 온도기울기, 산소, 농도 및, 반경방향의 산소농도 분포에 미치는 아르곤 가스 유동의 영향을 조사하였다. 아르곤의 유입량을 증가시킴에 따라 계면 근처 결정내 온도기울기가 증가하였으며. 결정내 산소농도는 감소하였다. 한편, 반경방향의 산소농도 균일성은 악화됨이 관찰되었다. 실험 결과를 종합하여 볼 때, 아르곤 유동이 산소 농도 및 균일 분포성 등의 결정 특성에 중요한 영향을 미치는 성장 공정변수임을 확인할 수 있었다.

• 물과 미래
• /
• 제24권1호
• /
• pp.109-117
• /
• 1991

포화-비포화 영역에서 transient흐름 해석을 위해 유체의 연속방정식과 Darcy 법칙으로부터 다공질 매체에서의 흐름 지배방정식을 유도하였다. 수치해는 가중잔차원리에 입각한 Galerkin 유한요소법으로 구하며, 시간도함수항에는 유한차분법을 적용하였다. 해석에서는 실제 자연상태에서 발생되는 부정호우자료를 이용하고 이때의 지표하 흐름 해석에 필요한 강우 주상도는 제 손실성분을 고려한 초과우량 추정모형으로부터 얻었다. 비포화 토양에서의 흐름을 고려하기 위해 투수계수, 압력수두 및 체적함수비의 상호 함수관계를 이용하였다. 모형은 대칭인 2차원으로서 비등방성, 이질 토층으로 구성하였다.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.31-40
• /
• 1999

The objective of this study were to develop a cooling simulation model for fixed-bed of rough rice and to analyze the factors affecting cooling time of rough rice. A computer simulation model based on equilibrium conditions between grain and air was developed to predict temperature and moisture content changes during cooling of rough rice. the result of t-test showed that there were no significant differences between predicted and measured temperature changes on significance model agreed well with measured values. This cooling simulation model was applied to analyze the effect of some factors, such as air flow rate, cooling air temperature and humidity, initial grain temperature and moisture content, and bed depth, on cooling time of rough rice. Cooling rate increased with increase of air flow rate and bed depth whereas it decreased with increase of cooling air temperature and humidity and initial grain temperature. Among these factors, the most important factor was air flow rate. Specific air flow rate of 0.35㎥/min㎥ was required for cooling rough rice in 24 hours.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.73-76
• /
• 2005

This study aims to suggest a simple and convenient design for a mix proportion method for high performance concrete by determining the optimum fine aggregate ratio and minimum binder content based on the maximum density theory. The mix design method introduced in this study adopted the optimum fine aggregate ratio with a minimum void and binder content higher than the minimum binder content level. The research results reveal that the method helps to reduce trial and error in the mixing process and is a convenient way of producing high performance concrete with self filler ability. In an experiment based on the mix proportion method, when aggregate with the fine aggregation ratio of 41$\%$ was used, the minimum binder content of high performance concrete was 470kg/$m^{3}$ and maximum aggregate capacity was $0.657m^{3}/m^{3}$. In addition, in mixing high performance concrete, the optimal slump flow to meet filler ability was 65$\pm$5cm, V load flow speed ranged from 0.5 to 1.5.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제68차 하계학술대회논문집 31권2호
• /
• pp.119-122
• /
• 2023

게임 이용자가 재미를 느끼고 몰입하며 그 재미가 오래 유지되도록 하는 것은 많은 게임 디자이너의 관심사이다. 본 논문에서는 비교적 적은 개발 비용으로 긴 몰입 기간을 만들어낸 몬스터 헌터: 월드를 통해 이를 가능토록 하는 게임 디자인 기법 "반복 플레이 동기 부여", "숙련도 영역 전환"의 두 가지를 제안한다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제5권5호
• /
• pp.423-431
• /
• 2001

Some recent investigations revealed that vasodilatory action of adenosine is mainly not mediated by surface A2 receptor and suggested the existence of an intracellular action site. In the present study, we tried to differentiate intracellular from extracellular site of adenosine action in the regulation of coronary flow. In perfused rabbit hearts, concentration-response curve of coronary flow to exogenous adenosine was constructed in the presence or absence of dipyridamole, an inhibitor of transmembrane purine transport. Inhibition of cellular adenosine uptake by dipyridamole suppressed the increase of flow rate while enhancing the decrease in heart rate induced by exogenous adenosine. In another series of experiments, perfused rabbit hearts were subjected to energy deprivation in order to increase the production of endogenous adenosine. Energy deprivation along with dipyridamole administration resulted in higher coronary flow rate. Lower perfusate adenosine concentration was observed along with higher tissue adenosine content in this group. These results implied that coronary flow rate is determined not by interstitial adenosine concentration but by intracellular activity of adenosine. To confirm the effects of dypiridamole in vivo, direct measurement of interstitial adenosine concentration by mycrodialysis along with the assay of intracellular adenosine content was performed after intranenous dipyridamole administration. After dipyridamole infusion, intracellular adenosine content was markedly increased while interstitial adenosine concentration was not altered. In another series of experiments, the right shift of concentration-response curve of adenosine-induced vasodilation by 8-phenyltheophilline, a representative adenosine receptor antagonist, was mostly abolished by prior administration of prazosin, indicating that the influence of 8-PT on the adenosine action is not attributed to the inhibition of A2 receptor but related to the suppression of ${\alpha}-adrenoceptor$ activation. From these results, we concluded that adenosine acts intracellularly to regulate the coronary blood flow.

• Preventive Nutrition and Food Science
• /
• 제15권4호
• /
• pp.356-359
• /
• 2010

Glass transition phenomena in nine Korean pure honeys (moisture content 18.3~20.1%) and honey-water mixtures by different water contents (0, 2, 5, and 10% w/w) were investigated with modulated different scanning calorimetry (MDSC). The total, reversing, and non-reversing heat flows were quantified during heating using MDSC. Glass transition was observed from reversing heat flow separated from the total heat flow. The glass transition temperatures ($T_g$) of pure honeys, which are in the range of $-42.7^{\circ}C$ to $-50.0^{\circ}C$, varied a lot with low determination coefficient ($R^2$=0.63), whereas those of honey-water mixtures decreased with a decrease in honey content. The $T_g$ values were also more significantly different among honey-water mixtures when compared to pure honeys, indicating that in the honey-water mixture system the $T_g$ values appear to be greatly dependent on moisture content. The measured heat capacity change (${\Delta}C_p$) was not influenced by moisture content.