DOI QR코드

DOI QR Code

Engineering Properties of Steel Fiber Reinforced High Performance Concrete

  • Kim Young Ik (Institute of Agricultural Science, College of Agriculture and Life Sciences, Chungnam National University) ;
  • Sung Chan Yong (Department of Rural Infrastructure Engieering, College of Agriculture and Life Sciences, Chungnam National University)
  • Published : 2004.12.01

Abstract

In this paper, the flowability, strengths, impact resistance and sulfuric acid resistance of steel fiber reinforced high performance concrete (SFHPC) for the steel fiber content and fly ash and blast furnace slag as admixtures were presented. For evaluating flowability particularly, tests of slump flow, box-type passing ability and L-type filling ability were performed. The slump flow of SFHPC was some decreased with increase of the steel fiber content. At the box-type passing ability, the difference of box height of SFHPC is greatly increased with increasing the fiber content. The L-type filling ability of SFHPC was not excellent above $0.75\% of the steel fiber content. Also, the compressive strength of SFHPC was decreased with increase of the steel fiber content, but the flexural strength of SFHPC was much higher than that of the concrete without the steel fiber. At the impact resistance, drop number of SFHPC for reaching final fracture was increased with increase of the fiber content. Also, the drop number for reaching initial fracture of lmm was increased with increase of the fiber content. At the sulfuric acid resistance, 4-week weight change of SFHPC with the steel fiber was almost similarity that of HPC without the steel fiber and was in the range of 73.6 to 81.5.

Keywords

References

  1. Adriano Papo and Luciano Piani, 2004, Effect of various superplasticizer on the rheological properties of Portland cement pastes, Cement and Concrete Research 34: 2,097-2,101
  2. David, W. A., A. W. Saak and H. M. Jennings, 1999, The influence of mixing on the rheology of fresh cement paste, Cement and Concrete Research 29 : 1,491-1,496
  3. Domone, P. L. and H. W. Chai, 1996, Design and testing of self-compacting concrete, in Proceedings of RILEM International Conference on Production Methods and Methods and Workability of Fresh Concrete, E&FN Spon, London: 223-236
  4. Elzeldin, A. S. and P. N. Balaguru, 1992, Normal and high strength fiber reinforced concrete under compression, Journal of Materials in Civil Engineering 4(4) : 415-429
  5. Jianrning Gao., Wei Sun and Morino. Keiii., 1997, Mechanical properties of steel fiber reinforced, high-strength, lightweight concrete, Cement and Concrete Composites 19(4) :307-313
  6. Khatri, R. P. and V. Sirivivatnanon, 1995, Effect of different supplementary cementitious materials on mechanical properties of high performance concrete, Cement and Concrete Research 25(1) : 209-220 https://doi.org/10.1016/0008-8846(94)00128-L
  7. Cengiz, 0 and L. Turanli, 2004, Compressive evaluation of steel mech, steel fiber and high-performance polypropylene fibre reinforced shotcrete in panel test, Cement and Concrete Research 34: 1,357-1,364
  8. Peter Robins, Simon Austin, Jim Chandler and Peter Jones, 2001, Flexural strain and crack width measurement of steel-fibre-reinforced concrete by optical grid and electrical gauge methods, Cement and Concrete Research 31 : 719-729
  9. Paulo. J. M and E. K. Kimberly, 2003, Time to failure concrete exposed to serve sulfate attack, Cement and Concrete Research 33: 987-993
  10. Sung, C. Y. and R. N. Swamy, 1997, Experimental study on engineering properties of lightweight aggregate concrete, Journal of the Korean Society of Agricultural Engineer 39(1) : 75-82 (in korean)