• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.645-650
• /
• 2003

The microstructure and electrical characteristics of $Pr_{6}$ $O_{11}$ -based ZnO varistor ceramics composed of $ZnO-Pr_{6}$ $O_{ 11}$/$-CoO-Cr_2$$O_3$-$Dy_2$$O_3$-based ceramics were investigated with $Dy_2$$O_3$content in the range of 0.0∼2.0 mol%. As $Dy_2$$O_3$content was increased, the average grain size was decreased in the range of 18.6∼4.7 $\mu\textrm{m}$ and the density of the ceramic was decreased in the range of 5.53∼4.34 g/㎤. While, the varistor voltage was increased in the range of 39.4∼436.6 V/mm and the nonlinear exponent was in the range of 4.5∼66.6 with increasing $Dy_2$$O_3$content. The addition of $Dy_2$$O_3$highly enhanced the nonlinear properties of varistors, compared with the varistor without $Dy_2$$O_3$. In particular, the varistor with $Dy_2$$O_3$ content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 66.6 and the leakage current is 1.2 $\mu\textrm{A}$. The donor concentration and the density of interface states were decreased in the range of $(4.19∼0.33) ${\times}$10^{18}$ //㎤ and $(5.38∼1.74) ${\times}$10^{12}$ $\textrm{cm}^2$, respectively, with increasing $Dy_2$$O_3$content. The minimum dissipation factor of 0.0302 was obtained from 0.5mol% $Dy_2$$O_3$.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.549-555
• /
• 2017

A lead slowing-down spectrometer (LSDS) system is under development to analyze isotopic fissile content that is applicable to spent fuel and recycled material. The source neutron mechanism for efficient and effective generation was also determined. The source neutron interacts with a lead medium and produces continuous neutron energy, and this energy generates dominant fission at each fissile, below the unresolved resonance region. From the relationship between the induced fissile fission and the fast fission neutron detection, a mathematical assay model for an isotopic fissile material was set up. The assay model can be expanded for all fissile materials. The correction factor for self-shielding was defined in the fuel assay area. The corrected fission signature provides well-defined fission properties with an increase in the fissile content. The assay procedure was also established. The assay energy range is very important to take into account the prominent fission structure of each fissile material. Fission detection occurred according to the change of the Pu239 weight percent (wt%), but the content of U235 and Pu241 was fixed at 1 wt%. The assay result was obtained with 2~3% uncertainty for Pu239, depending on the amount of Pu239 in the fuel. The results show that LSDS is a very powerful technique to assay the isotopic fissile content in spent fuel and recycled materials for the reuse of fissile materials. Additionally, a LSDS is applicable during the optimum design of spent fuel storage facilities and their management. The isotopic fissile content assay will increase the transparency and credibility of spent fuel storage.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• The Research Journal of the Costume Culture
• /
• v.29 no.4
• /
• pp.554-571
• /
• 2021

The purpose of this study is to investigate the mediating effect of trust when a media broadcaster (such as a disc jockey [DJ]) acting as an information source and the content they provide during live commerce streaming affect acceptance intention. Live commerce is increasing rapidly, offering a new fashion distribution channel by supplementing possible shortcomings of existing online shopping. Data was collected for the empirical study from female consumers in their 20s who actively accepted fashion technology. Statistical analysis of the data was conducted using IBM SPSS Macro Process 3.5. First, the reliability and validity of the variables for information source characteristics, content informativeness, trust, and acceptance intention were verified, and each variable was confirmed as a single factor. Bootstrap analysis was performed using Macro Process Model 4 to reveal the effects of information source characteristics and content informativeness on acceptance intention. As a result of analyzing the mediating effect for each path model with trust as a parameter, it was found that both the direct and indirect effects of the mediating path were significant. This result means that the characteristics of information sources and content informativeness are partially mediated by trust. Therefore, to promote consumer behavior in a live commerce shopping environment, it is necessary to enhance trust. This can be achieved by a media broadcaster with fashion expertise to increase the perception of the attractiveness of the information source and to improve the usefulness of the fashion information being delivered.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.330-330
• /
• 2022

In recent studies, cold plasma has been used to induce exudation of polyphenols and flavonoids from food materials, leading to enhancement of functional properties. And it is known that polyphenols interact with inflammation related metabolism. The objectives of this study were to investigate the effects of cold plasma treatments on the increase of total phenolic content (TPC), total flavonoid content (TFC), and anti-inflammatory activities of 'Sinpalkwang' peanut (Arachis hypogaea L.) hull. Plasma treatments were carried out using a dielectric barrier discharge gas exchange system at different radicals and temperatures (O₃-25℃, O₃-150℃, NO_x-150℃). Significant differences in TPC, TFC, and inflammatory mediator such as nitric oxide (NO) and tumor necrosis factor a (TNF-α) in lipopolysaccharide stimulated Raw 264.7 macrophages were observed between treated and non-treated peanut hull samples (p < 0.001). Cold plasma treated samples showed higher content (TPC: 2.87-2.93 mg/g sample, TFC: 0.96-0.98 mg/g sample) than non-treated sample (TPC: 2.47 mg/g sample, TFC: 0.78 mg/g sample). Cold plasma treated samples showed lower content of NO (3.3-5.0 uM) and TNF-α (141.4-162.2 ng/mL) than non-treated sample (NO: 11.1 uM, TNF-α: 210.2 ng/mL). This study suggests that cold plasma has potential to improve functionalities of food materials and that cold plasma treated peanut hull can be used as immune enhancing materials.

• Smart Media Journal
• /
• v.12 no.8
• /
• pp.37-44
• /
• 2023

This study investigated the influence of travel-related content on the popular short-form platform TikTok in China on users' intentions to visit travel destinations and purchase travel products. Conducted in July 2023, amidst the rising consumption of short-form content through mobile devices due to the COVID-19 pandemic, the research surveyed 337 participants using an online survey platform in China. The findings revealed that the entertainment factor within TikTok's content did not significantly impact the perception of travel destinations, whereas informativeness and trustworthiness had positive effects. Moreover, expertise and interactivity also had positive effects. The study demonstrated that the image of travel destinations formed through short-form content on TikTok positively and significantly influenced visitors' intentions. These results provide valuable insights for crafting effective strategies in the tourism industry and marketing efforts.

• Journal of Korea Foundry Society
• /
• v.44 no.3
• /
• pp.70-76
• /
• 2024

Sodium silicate binder is eco-friendly inorganic binder to substitute organic binder in foundry industry, but it has low stability at moisture. In this study, the bending strength of sand cores with sodium silicate binder at various curing condition was measured for confirm the effect of moisture content in cured sodium silicate binder on the strength and stability. The sodium silicate binder generates stable binder bridge with silicate structure of Q³ and Q² at 130℃. The maximum bending strength of sand cores was not affected by curing conditions, because the silicate structure of binder bridges was similar. However, the lower moisture content of cured sodium silicate binder, stability of strength was enhanced. Therefore, it was confirmed that the moisture content of cured sodium silicate binder is important factor at stability of sodium silicate binder.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.4
• /
• pp.381-385
• /
• 2000

Objective: To verify the effect of two forms (growth factor and growthfactor-reduced) of solubilized Matrigel on the development in mouse preimplantation embryos. Methods: Late 2-cell stage eggs were cultured through the blastocyst stage in the presence of GF- or GFR-Matrigel (0.5%, v/v). Morphological development, cell number and % apoptotic nuclei of blastocyst were measured by Roecst staining and TUNEL of nuclei. Results: Morphological development, number of cells per embryo was significantly increased in the presence of GF- or GFR-Matrigel. Culture of the embryos in the GF-Matrigel gave the best result. Conclusion: Low concentration of solubilized Matrigel improved development of mouse embryos regardless of growth factor content of the Matrigel. Growth factors and extracellular matrix protein included in the Matrigel synergistically potentiated the development of mouse embryos.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.472-476
• /
• 2012

In this paper, a sensorless control scheme for a three-phase bi-directional voltage-type PWM rectifier in wind power generation system that operates without the input AC voltage sensors (generator side) is described. The basic principles and classification of the PWM rectifier are analyzed, and then the three-phase mathematical model of the input AC voltage sensorless PWM rectifier control system is established. The proposed scheme has been developed in order to lower the cost of the three-phase PWM rectifier but still achieve excellent output voltage regulation, limited current harmonic content, and unity input power factor.

• Korean Journal of Child Studies
• /
• v.27 no.5
• /
• pp.49-65
• /
• 2006

This attitudes scale for prediction of mathematics achievement by elementary school students was developed from 50 initial items from the literature rated for content validity by 30 experts. The ratings rendered 31 revised items used for exploratory factor analysis and reliability tests. The 31 items were administered to 183 elementary students in 4th, 5th, and 6th grades, yielding 4 factors : enjoyment, confidence, value, and motivation with high inter-items consistency. To confirm appropriateness of the constructed model and to test its predictability in mathematics achievements, confirmative factor analysis and discriminant analysis were performed on 693 cases. Results showed that the attitude scale model of 4 factors can be recommended for use in the measurement of elementary school students' attitudes toward mathematics.