Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Isotopic Fissile Assay of Spent Fuel in a Lead Slowing-Down Spectrometer System

  • Lee, Yongdeok (Korea Atomic Energy Research Institute, Fuel Cycle Technology Development) ;
  • Jeon, Juyoung (Korea Atomic Energy Research Institute, Fuel Cycle Technology Development) ;
  • Park, Changje (Sejong University, Department of Nuclear Engineering)
  • Received : 2016.06.13
  • Accepted : 2016.09.30
  • Published : 2017.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

A lead slowing-down spectrometer (LSDS) system is under development to analyze isotopic fissile content that is applicable to spent fuel and recycled material. The source neutron mechanism for efficient and effective generation was also determined. The source neutron interacts with a lead medium and produces continuous neutron energy, and this energy generates dominant fission at each fissile, below the unresolved resonance region. From the relationship between the induced fissile fission and the fast fission neutron detection, a mathematical assay model for an isotopic fissile material was set up. The assay model can be expanded for all fissile materials. The correction factor for self-shielding was defined in the fuel assay area. The corrected fission signature provides well-defined fission properties with an increase in the fissile content. The assay procedure was also established. The assay energy range is very important to take into account the prominent fission structure of each fissile material. Fission detection occurred according to the change of the Pu239 weight percent (wt%), but the content of U235 and Pu241 was fixed at 1 wt%. The assay result was obtained with 2~3% uncertainty for Pu239, depending on the amount of Pu239 in the fuel. The results show that LSDS is a very powerful technique to assay the isotopic fissile content in spent fuel and recycled materials for the reuse of fissile materials. Additionally, a LSDS is applicable during the optimum design of spent fuel storage facilities and their management. The isotopic fissile content assay will increase the transparency and credibility of spent fuel storage.

Keywords

References

  1. A.G. Croff, ORIGEN2 Isotope Generation and Depletion Code Matrix Exponential Method, Oak Ridge National Laboratory, USA, 1985.
  2. Y.D. Lee, C.J. Park, S.J. Ahn, H.D. Kim, Development of lead slowing down spectrometer for isotopic fissile assay, Nucl. Eng. Technol 46 (2014), 837-446. https://doi.org/10.5516/NET.06.2014.069
  3. Y.D. Lee, C.J. Park, H.D. Kim, K.C. Song, Design of LSDS for isotopic fissile assay in spent fuel, Nucl. Eng. Technol 45 (2013) 921-928. https://doi.org/10.5516/NET.06.2013.044
  4. Y. Lee, J.Y. Jeon, C.J. Park, Quantitative Fissile Assay in Used Fuel Using LSDS System, Joint 13th International Conference on Radiation Shielding & 19th Topical Meeting of the Radiation Protection and Shielding Division of the ANS, Paris, France, October 3, 2016.
  5. Y. Danon, Experiments with a Lead Slowing-down Spectrometer for Assay of Used Nuclear Fuel, Rensselaer Polytechnic Institute, USA, 2012.
  6. Y.D. Lee, C.J. Park, G.I. Park, K.C. Song, Self shielding in nuclear fissile assay using LSDS, Trans. of the KNS, Jeju (2012) 345-346.
  7. D.B. Pelowitz, MCNP: A General Monte Carlo Code for Neutron and Photon Transport, LA-CP-05-0369, Los Alamos National Laboratory, USA, 2005.
  8. C.J. Park, M.K. Jaradat, L. Alawneh, Y.D. Lee, Metal plate target design for the lead slowing down time spectrometer (LSDTS), Ann. Nucl. Energy 49 (2012) 218-222. https://doi.org/10.1016/j.anucene.2012.05.029
  9. J.D. Kim, S.J. Ahn, Y.D. Lee, C.J. Park, Design optimization of radiation shielding structure for lead slowing-down spectrometer system, Nucl. Eng. Technol 47 (2015).