• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.193-196
• /
• 1974

The adsorption of atrazine In Massachusetts soils has been proved to be as the following: 1. Soil organic matter content is the most effective factor in controlling the adsorption. 2. The adsorption is negatively related to the pH of the soil. Soil acidity appears to be closely associated with N-KCl extractable aluminum content.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.104-114
• /
• 1995

The purpose of this study were 1) to classify the consumer of outlet stole according to their patronage, 2) to investigate the differences between the patronge group and non-patronge group in 3 purchase behavior variables (shopping orientations, importance of store attributes, use of information sources) and demographic variables, and 3) to find out the reasons why consumers prefer outlet to department store's bargain sales (including clearance sales). The questionnaires were administered to 344 women living in Seoul, and the methods used to analyze the data were frequency, factor analysis, 1-test, $x^2$ test and content analysis. The results were as follows 1) outlet store consumers were classified into patronage group(n= 71) and non-patronage group(n=87). 2) There were some significant differences between patronage group and non.patronage group in 6 variables. Those who patronize outlet store does not count on the exclusiveness and the convenience of the store, enjoy common style in fashion, are price-conscious and lower in income. 3) Marketing implications were discussed according to the result of content analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.233-235
• /
• 1997

A free sparse transmission method using X-band standard gain horn antenna is applied to measure the attenuation and phase shift of microwave signal through the wetted grain such as rough rice, brown rice and barley. The moisture content of grain varied from 11 to 25% based on its wetted condition. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The measured values of dielectric constants as a function of moisture density are compared with values of those obtained using the predicted model for estimating dielectric constants of grain.

• International Commerce and Information Review
• /
• v.6 no.3
• /
• pp.297-318
• /
• 2004

This paper examines export promotion plans of digital content industries, particularly of game, animation & character industry based on the OSMU(One-source Multi-Use) strategy. As the digital content industry is one of the newest industries as a source of strategic export, we must promote the export of digital contents that hold so much international competitiveness and through that promotion, we have to strengthen the international competitive power. The game, animation & character contents are very easy to adapt each other for creating new contents by omnidirectional OSMU. Therefore, it is intended to present some primary factor for export promotion of game, animation & character contents through the OSMU strategy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.331-336
• /
• 1999

Permeable polymer concrete in this study is one of the environment conscious concrete that can be applied at road, side walks and river embankment, etc. The purpose of this study is to evaluate the effects of mix proportions such as resing content, filler-binder ratio and aggregate ratio on the freezing and thawing resistance of permeable polymer concrete. The permeable polymer concrete are prepared with the resin ratio of 5%, 6% and 7%, filler-binder ratio of 0, 0.5 and 1.0, and 2.5~5mm sized aggregate ratio to standard sand of 10:10, 10:20, 20:10 and 20:20. It is tested for freezing and thawing test according to ASTM C 666092, and then, weight change, length change, relative dynamic modulus, durability factor, and compressive and flexural strengths after test are measured. From the test results, the resistance to freezing and thawing of permeable polymer concrete increased with increase the resing content, filler-binder ratio and fine aggregate ratio.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.540-545
• /
• 2005

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters, with 3-hydroxyvalerate (3HV) contents ranging from 17 to 60 mol%, were produced by Alcaligenes sp. MT-16, and their biocompatibility evaluated by the growth of Chinese hamster ovary (CHO) cells and the adsorption of blood proteins and platelets onto their film surfaces. The number of CHO cells that adhered to and grew on these films was higher with increasing 3HV content. In contrast, the tendency for blood proteins and platelets to adhere to the copolyester surfaces significantly decreased with increasing 3HV content. Examination of the surface morphology using atomic force microscopy revealed that the surface roughness was an important factor in determining the biocompatibility of theses copolyesters. The results obtained in this study suggest that poly(3HB-co-3HV) copolyesters, with >30 mol% 3HV, may be useful in biocompatible biomedical applications.

• Journal of the Korean Ceramic Society
• /
• v.29 no.3
• /
• pp.183-188
• /
• 1992

The physical properties of 0.5PZT-0.5(PNN-PZN) ceramics have been investigated as a function of PZN content. A pyrochlore phase exists in the range of 600∼850$^{\circ}C$ and a stable perovskite phase appears above 850$^{\circ}C$. The piezoelectric properties (except electro-mechanical coupling factor) of 0.5PZT-0.5(PNN-PZN) ceramics showed almost linear relationships of PZN content within the range of 0.5PZT-0.5PNN system and 0.5PZT-0.5PZN system. The temperature dependence of piezoelectric constant, the electric field dependence of induced strain and a bend strength are improved by addition of PZN.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.529-532
• /
• 2007

In order to characterize the thermal conductivity and viscosity of grout materials used for backfilling ground heat exchangers, nine bentonite grouts and cement grouts being adapted in the United State have been considered in this study. The bentonite grouts indicate that the thermal conductivity and viscosity increase with the content of bentonite or filler (silica sand). In addition, material segregation can be observed when the viscosity of grout is relatively low. The saturated cement grouts appear to possess much higher thermal conductivity than the saturated bentonite grouts, and the reduction of thermal conductivity in the cement grouts after drying specimens is less than in case of the bentonite grouts. Maintaining the moisture content of grouts is a crucial factor in enhancing the efficiency of ground heat exchangers.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.272-278
• /
• 1999

Tungsten Carbide(WC) Roll is widely used in finishing stands of wire rod mill. This report is about the manufacturing method of WC roll with excellent wear resistance. To enhance wear resistance, WC content has been increased to the maximum extent while binder content such as Co, Ni, Cr has been minimized. Part of WC is replaced with TiC having more wear resistant than WC. WTiC powder has been used to prevent weight unbalance resulting from the difference of specific weight when adding TiC. The roll manufactured by this method, is having more wear resistance than the existing rolls when applying to the final stand of the finishing mill. This report shows that WC is the critical factor of wear resistance in WC rolls and an approprite amount of TiC effects wear resistance and when adding TiC, using WTiC powder is better.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.22-31
• /
• 2002

In this paper, PVA(polyvinylalcohol), oxidized starch and SBR latex were used as binders for ink-jet printing papers, and their effects of the type and blending ratio of binders on ink-jet printing properties were compared. In case of coating color using PVA mainly used for a binder in ink-jet printing, spreading of printed letters decreased and excellent images were manifested resulting from strong hydrophilic of PVA. However, increasing solids content of coating color was somewhat limited because of the interaction of PVA and functional groups in silica as well as high molecular weight of PVA. When oxidized starch and SBR latex were mixed with PVA at desirable ratio to solve these problems, runnability in coating process was improved and good printing properties were shown. Gloss was improved when latex was used along with PVA as a binder because of the thermoplastic property of the latex. From this result, possibilities of high solids content and high gloss ink-jet printing papers were investigated.