• 핵의학기술
• /
• 제13권3호
• /
• pp.189-192
• /
• 2009

목적 : 자동분주기의 fixed probe pipetting system 은 검체 분주시 probe 내외부의 잔여물이 다음 pipetting cycle로 이월되어 처음 측정치가 차기 측정치의 결과에 영향을 미치는 이월오염(carryover contamination)을 발생시킬 수 있다. 이번 연구는 본원에 도입된 TECAN 사의 Freedom Evo 100 자동 분주기의 $\alpha$-fetoprotein (AFP)과 carcinoembryonic antigen (CEA) 검사 시 검체간 이월오염 발생을 확인하였다. 방법 : reference 가 되는 오염이 안 된 저농도 검체를 연속분주한다. 그런 후 고농도 검체를 분주한 다음 오염이 예상되는 저농도 검체를 연속 3회 분주하는 과정을 교대로 반복한다. 오염이 안 된 저농도 검체와 오염이 예상되는 저농도 검체값의 각 평균값을 서로 비교하여보고 각 저농도 검체값이 최소 검출 농도 이하인지 확인하고 만약 저농도 검체값간의 평균값이 차이가 있다면 그 차이가 1 ppm 이하의 carryover target 농도값 이하인지 확인한다. 결과 : AFP 약 650,000 IU/mL와 CEA 약 65,000 ng/mL의 고농도 검체에서는 오염이 안 된 저농도 검체값과 오염이 예상되는 저농도 검체값의 평균값 모두 각 검사의 최소 검출 농도값 이하로 이월오염이 나타나지 않았다. 결론 : 이번 연구에서 사용한 AFP와 CEA의 고농도 검체에서는 이월오염이 나타나지 않았지만 검사자는 검사결과 보고시 고농도 검체가 다음 환자 검사결과의 안정성에 영향을 줄 수 있음을 주시하고 이월오염을 확인하기위해 주기적인 장비관리와 이월오염 측정을 시행하여야한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권5호
• /
• pp.1301-1316
• /
• 2024

In modern warfare, missiles play a pivotal role but typically spend the majority of their lifecycle in long-term storage or standby mode, making it difficult to detect failures. Preemptive detection of missiles that will fail is crucial to preventing severe consequences, including safety hazards and mission failures. This study proposes a contamination-based stacking ensemble model, employing the local outlier factor (LOF), to detect such missiles. The proposed model creates multiple base LOF models with different contamination values and combines their anomaly scores to achieve a robust anomaly detection. A comparative performance analysis was conducted between the proposed model and the traditional single LOF model, using production-related inspection data from missiles deployed in the military. The experimental results showed that, with the contamination parameter set to 0.1, the proposed model exhibited an increase of approximately 22 percentage points in accuracy and 71 percentage points in F1-score compared to the single LOF model. This approach enables the preemptive identification of potential failures, undetectable through traditional statistical quality control methods. Consequently, it contributes to lower missile failure rates in real battlefield scenarios, leading to significant time and cost savings in the military industry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.193-193
• /
• 2012

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is the most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. Single-chamber PECVD system for a-Si:H solar cell manufacturing has the advantage of lower initial investment and maintenance cost for the equipment. However, in single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of single-chamber PECVD system. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. In order to remove the deposited B inside of the plasma chamber during p-layer deposition, a high RF power was applied right after p-layer deposition with SiH4 gas off, which is then followed by i-layer, n-layer, and Ag top-electrode deposition without vacuum break. In addition to the p-i interface control, various interface control techniques such as FTO-glass pre-annealing in O2 environment to further reduce sheet resistance of FTO-glass, thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, and hydrogen plasma treatment prior to n-layer deposition, etc. were developed. The best initial solar cell efficiency using single-chamber PECVD system of 10.5% for test cell area of 0.2 $cm^2$ could be achieved by adopting various interface control methods.

• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.5-13
• /
• 2011

This research proposed the space planing methode and diagrams of restaurant kitchens to improve hygiene by analyzing the related contents collected from books and researches in interior design and HACCP (Hazard Analysis and Critical Control Point). HACCP is an effective and scientific hygiene system for food safety in order to prevent cross-contamination from food hazards. Based on the analyses, improvement of food production environments like restaurant kitchens is necessary for food hygiene. The space planing methode of restaurant kitchens to improve hygiene are followings: The circulation planing is that the direction of movement of the food, workers, waste, and dishes should be fractionated and managed for cross-contamination prevention. The space separation planing is that the spaces in the kitchen should be classified and divided into contaminated area and non-contaminated and clean area depending on the degree of cleanliness. The zoning is space arrangement with feed-back process to check the possible points of cross-contamination and correct space arrangement until the possibility of cross-contamination disappear in kitchen. However, if cross-contamination is unavoidable in some points in restaurant kitchens, hygiene facilities such as washing rooms, pass rooms, and double doors with air-shower should be located in order to remove contamination.

• 한국입자에어로졸학회지
• /
• 제13권2호
• /
• pp.65-77
• /
• 2017

In recent large-scale semiconductor manufacturing cleanrooms, the energy consumption in outdoor air conditioning (OAC) systems to heat, humidify, cool and dehumidify outdoor air(OA) represents about 40~50 % of the total cleanroom power consumption required to maintain cleanroom environment. Therefore, the assessment of energy consumption in outdoor air conditioning systems is essential for reducing the outdoor air conditioning load for a cleanroom. In the present study, an experiment with an outdoor air flow rate of $1,000m^3/h$ was conducted to compare the energy consumption in steam humidification, simple air washer, exhaust air heat recovery type air washer and dry cooling coil(DCC) return water heat recovery type air washer OAC systems. Besides, a numerical analysis was carried out to evaluate the annual energy consumption of the aforementioned four OAC systems. It was shown that the simple air washer, exhaust air heat recovery type air washer and DCC return water heat recovery type air washer OAC systems using water spray humidification were more energy-efficient than the steam humidification OAC system. Furthermore the DCC return water heat recovery type air washer OAC system was the most energy-efficient.

• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.234-236
• /
• 2013

비밀봉 방사성물질을 취급하는 시설에서 이들 물질에 의한 작업환경의 다소간의 오염은 피할 수 없다. 오염의 우려가 있는 작업환경에서 오염관리의 일차적인 목적은 방사성물질의 잠재적 체내섭취로 인한 영향이다. 본 논문은 보수적 가정과 간단한 계산에 의거하여 공기오염에 따른 방사성물질의 공기중 농도와 흡입에 의한 연간 섭취량을 산출한 후, 관련 고시에서 정하는 유도공기중농도와 연간섭취한도와 비교함으로써 종사자의 내부피폭 정도를 평가하는 절차를 제공한다. 제시된 절차는 공기중 방사성물질 측정 및 내부피폭 감시의 필요성, 적합한 방호용구의 착용, 배기설비 설계를 위한 정보 획득 등 공기오염과 종사자의 내부피폭 감시를 위한 실무적 요건을 판단할 목적으로 활용될 수 있다.

• 보건교육건강증진학회지
• /
• 제23권3호
• /
• pp.53-63
• /
• 2006

Objectives: The purpose of this study was to analyze the effects of microbe inspections on the hygienic improvement of school food service systems. Methods: Thirty-three school food service systems in Incheon metropolitan city participated in the study from Sep. 2004 to Apr. 2005. Major items of microbe inspections were cutting boards, knives, kitchen towels, and kitchen staff's hands. The Rodac plate and hand plate were used to measure the surface contamination level of germs such as Staphylococcus aureus, Vibrio species, Salmonella species and E. coli. Results: This study compared the results of the inspections in Sep. 2004 and Apr. 2005. The surface contamination level of Staphylococcus aureus and Vibrio species on the knives and kitchen towels had significantly improved. However, the surface contamination level of E. coli on the hands of the kitchen staff had worsened. Conclusions: This study showed that microbe inspections could control the hygienic level of the school food service systems. In the future, microbe inspections should be actively used to improve sanitary conditions in the school lunch system.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.371-372
• /
• 2018

• 대한설비공학회지:설비저널
• /
• 제19권6호
• /
• pp.342-351
• /
• 1990

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.412-420
• /
• 2003

This study describes the merits of PWM control of hydraulic system using high speed on-off valves. Generally, Electro-hydraulic valves can be classified into two classification: valves which are controlled by analog signal and which are controlled by digital. The former includes hydraulic servo valves and proportional valves which require A/D converters as interface to digital computer and too costly and sensitive to oil contamination because of complexity in structures. The latter includes high speed on-off valves which do not require A/D converters because they are normally operated in a pulse width modulation(PWM) method, and are low in price and robust to oil contamination because of their simple structures. The objectives of this study is to analyze the limit cycle which regularly appear in the position control system using 2/2way high speed on-off valves and to give a criterion for the stability of this system. The nonlinear characteristics of PWM and cylinder friction of this system are described by harmonic linearization and the effects of parameter variations to the system stability are simulated.