• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1533-1540
• /
• 2001

A high-temperature sodium stainless steel heat pipe was fabricated and its performance has been investigated. The working fluid was sodium and it was sealed inside a straight tube container made of stainless steel. The amount of sodium occupied approximately 20% of the total volume of the heat pipe and its weight was 65.7gram. The length of a stainless steel container is 1002mm and its outside diameter is 25.4mm. Performance tests were carried out in a room air condition under a free convective environment and the measured temperatures are presented. The start-up behavior of the heat pipe from a frozen state was investigated for various heat input values between 600W and 1205W. In steady state, axial temperature distributions of a heat pipe were measured and its heat transfer rates were estimated in the range of vapor temperature from 50$0^{\circ}C$ to 63$0^{\circ}C$. It is found that there are small temperature differences in the vapor core along the axial direction of a sodium heat pipe for the high operating temperatures. But for the range of low operating temperatures there are large temperature drops along the vapor core region of a sodium heat pipe, because a small vapor pressure drop makes a large temperature drop. The transition temperature was reached more rapidly in the cases of high heat input rate for the sodium heat pipe.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.317-323
• /
• 2006

본 시험의 목적은 컨테이너터미널의 생산성을 향상시키기 위해서 기술개발 추진 중인 컨테이너 자기하역차량(ALV:Automated Lifting Vehicle)의 핵심 기술개발 요소 중 하나인 주행구동장치 (Gantry Travel Mechanism) 시제품을 제작하여, 무부하 및 부하 조건에서 각종 Test와 한계하중 실험 과정을 통하여 설게 Data의 확인과 상세 제작도면의 오류를 사전에 발견하여 최종 제작도면에 수정 반영함으로써 보다 완벽한 장비를 개발하는 것을 목적으로 한다.

• 무역상무연구
• /
• 제45권
• /
• pp.85-109
• /
• 2010

L/C provides the exporter and the importer with safe assurance in the exchange of goods for payment in international trade. It involves a number of parties. Although the parties may have confidence in their client, bad faith or ignorance of international banking practice by any of these parties could cause the failure of transaction, which makes international trade a risky business. Most of the risks are found in transport document, which can cause disputes. There are many factors in the risk of transport documents under L/C transaction. One most common risk factor for the beneficiary in all transport documents is even if there is no discrepancy in document, the issuing bank or the applicant refuses to pay or delay payment insisting there is a discrepancy. In some very rare cases, the beneficiary may not get paid due to unfair injunction of the local court of the applicant. For the applicant, most common risk factors are fake bill and fraud. Risks classified according to the sorts of transport documents are as follows. 1. In B/L, payment can be refused because it is regarded as charter party B/L, although there is no real charter party contract. And the applicant can bear the potential risk of the loss or deterioration of cargo through transhipment of the cargo loaded on board in container if transhipment is prohibited without excluding of UCP 600 article 20 (c). 2. In charter party B/L, the applicant may take delivery without paying when charter party B/L is signed by charterer, which can result in a big loss for the beneficiary and the negotiating bank. And risks may arise when cargo is seized because the charterer does not pay the hire. The applicant and the issuing bank are also vulnerable to a risk - Against whom should they file a suit when cargo gets damaged during transportation? 3. In multimodal transport document, which is subject to a conflict because there is a big difference in viewpoints between transport industry and banks, conflicts may also arise when L/C requires ocean B/L and accepts multimodal transport document at the same time, but does not specify the details. 4. In air waybill, where the consignee is not the issuing bank but the applicant, risks may take place to the beneficiary when the applicant takes delivery but refuses to pay asserting minor discrepancies in document. The applicant may also bear the risk when cargo may not be loaded because air waybill is a received bill. Another risk may arise when although the applicant prohibits transhipment without excluding UCP 600 article 23 (c), the cargo may be transhipped, provided that the entire carriage is covered by one and the same air waybill.

• 한국항해항만학회지
• /
• 제41권3호
• /
• pp.149-154
• /
• 2017

최근 컨테이너 터미널에서는 야드 장비의 자동화 및 환적화물의 증가로 인하여 터미널내의 이적작업이 증가하고 있으며 이에 따라 터미널 운영자들은 효율적인 이적작업 계획을 수립하고자 노력하고 있다. 보통 자동화 컨테이너 터미널에서는 장치장에 다수의 자동화된 야드 크레인을 사용하여 컨테이너를 취급하고 있으며 선적작업의 효율을 높이기 위하여 여유시간대를 이용하여 이적작업을 수행하고 있다. 본 연구는 블록 내에서 다수의 자동화 야드 크레인이 운영되고 있는 경우의 이적작업 계획을 다루고 있으며 혼합정수계획법을 이용하여 주어진 여유 시간을 고려하여 작업효율을 최대화하는 각 크레인 별 최적 이적작업 계획을 수립하는 수리모형을 제시하였다. 또한 컨테이너 터미널 현장에서 쉽게 적용할 수 있도록 빠른 시간 안에 이적작업계획을 수립할 수 있는 작업 할당규칙을 찾기 위하여 다섯 가지 대표적인 할당규칙에 대하여 수치 실험을 통하여 유용성을 분석하였다. 수치 실험 결과 작업할당 규칙 중에서 MR규칙과 MW규칙이 다수 자동화 야드 크레인의 이적작업 할당규칙으로 좋은 성능을 발휘하는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.97-104
• /
• 2009

Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.

• 한국항해항만학회지
• /
• 제34권5호
• /
• pp.311-317
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 특정 정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 등의 원천기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동적안정성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔닝윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념설계를 제안한다.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.237-246
• /
• 2015

본 논문에서는 컨테이너터미널에서 탠덤 리프트 안벽크레인과 고생산성 컨테이너 이송차량 Alternative ship-to-yard vehicles를 고려한 시뮬레이션을 활용하여 컨테이너터미널의 생산성 향상 모델을 제안한다. 이 방법의 특징은 탠덤 리프트 안벽크레인과 고생산성 컨테이너 이송차량의 데이터를 도출하고, 회귀분석 함으로써 탠덤 리프트 안벽크레인의 생산성 모델을 추정한다. 탠덤 리프트 안벽크레인은 한 사이클 당 20ft 컨테이너 4개, 40ft 컨테이너 2개를 동시에 취급함으로서 기존의 싱글 안벽크레인보다 이론상 약 2배의 컨테이너 생산성을 증가시키는 장비이고 Alternative ship-to-yard vehicles는 기존의 야드 트랙터보다 더 많은 최대 4TEU의 컨테이너를 운반시킬 수 있는 장비이다. 본 논문에서는 신기술 안벽장비인 탠덤 리프트 안벽크레인과 신기술 이송장비인 Alternative ship-to-yard vehicles를 적용한 시뮬레이션을 통하여 생산성에 관한 데이터를 도출하고 통계 기법인 회귀분석을 통하여 컨테이너 터미널의 생산성의 추정모델을 구해보고자 한다.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.611-622
• /
• 2021

Composite material-due to low density-causes weight savings, which results in lower fuel consumption of transport vehicles. The aim of the research was to change the existing base-plate of the aluminum airplane container with the composite sandwich plate in order to reduce the weight of the containers of cargo aircrafts. The newly constructed sandwich plate consists of aluminum honeycomb core and composite face-sheets. The face-sheets consist of glass or carbon or hybrid fiber layers. The orientations of the fibers in the face-sheets were 0°, 90° and ±45°. Multi-objective optimization method was elaborated for the newly constructed sandwich plates. Based on the design aim, the importance of the objective functions (weight and cost of sandwich plates) was the same (50%). During the optimization nine design constraints were considered: stiffness, deflection, facing stress, core shear stress, skin stress, plate buckling, shear crimping, skin wrinkling, intracell buckling. The design variables were core thickness and number of layers of the face-sheets. During the optimization both the Weighted Normalized Method of the Excel Solver and the Genetic Algorithm Solver of Matlab software were applied. The mechanical properties of composite face-sheets were calculated by Laminator software according to the Classical Lamination Plate Theory and Tsai-Hill failure criteria. The main added-value of the study is that the multi-objective optimization method was elaborated for the newly constructed sandwich structures. It was confirmed that the optimal new composite sandwich construction-due to weight savings and lower fuel consumption of cargo aircrafts - is more advantageous than conventional all-aluminum container.

• 한국항해항만학회지
• /
• 제46권1호
• /
• pp.33-41
• /
• 2022

컨테이너 터미널의 중요한 운영 목표는 선박에 컨테이너를 싣고 내리는 안벽 크레인(QC: quay crane) 작업의 효율을 극대화하는 것이다. QC 작업 효율의 극대화를 위해서는 장치장과 QC 사이를 오가며 컨테이너를 운반하는 내부트럭(YT: yard tractor)의 운행 지연이 최소화되어야 하는데, 터미널 내부의 교통 정체가 이를 어렵게 하는 경우가 많다. 본 논문에서는 YT와 외부트럭이 혼재하여 다니는 터미널에서YT의 운영 데이터만을 기반으로 터미널 내부 교통 속도를 예측하는 모델을 학습하는 방안을 제안한다. 외부트럭에 대한 교통 데이터는 구할 수 없지만, 대신 YT 운영 데이터에는 가까운 미래의 YT 운행 경로에 관한 정보가 포함되어 있어서 교통 예측에 상당한 도움이 된다. 시뮬레이션 실험 결과 제안 방안으로 학습한 모델이 상당히 정확한 수준으로 교통 속도를 예측할 수 있음을 확인하였다.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.110-116
• /
• 2020

As the management plan for domestic spent nuclear fuel is delayed, the storage of the operating nuclear power plant is approaching saturation, and the Kori 1 Unit that has reached its end of operation life is preparing for the dismantling plan. The first stage of dismantling is the transfer of spent nuclear fuel stored in storage at plants. The spent fuel management process leads to temporary storage, interim storage, reprocessing and permanent disposal. In this paper, the technical issues to be considered when transporting spent fuel in this process are summarized. The spent fuels are treated as high-level radioactive waste and strictly managed according to international regulations. A series of integrity tests are performed to demonstrate that spent fuel can be safely stored for decades in a dry environment before being transferred to an intermediate storage facility. The safety of spent fuel transport container must be demonstrated under normal transport conditions and virtual accident conditions. IAEA international standards are commonly applied to the design of transport containers, licensing regulations and transport regulations worldwide. In addition, each country operates a physical protection system to reduce and respond to the threat of radioactive terrorism.