• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.736-749
• /
• 2019

This paper employs computational tools to investigate the diffraction effects in regular head waves on the added resistance and wake on the propeller plane. The objective ships are a 66,000 DWT bulk carrier and a 3,600 TEU container ship. Fixed and free to heave and pitch conditions at design speed have been taken into account. Two-phase unsteady Reynolds averaged Navier-Stokes equations have been solved using the finite volume method; and a realizable k-ε model has been applied for the turbulent closure. The free surface is obtained by solving a VOF equation. The computations are carried out at the same scale of the model tests. Grid and numerical wave damping zones are applied to remove unwanted wave reflection at the boundaries. The computational results are analyzed using the Fourier series. The added resistances in waves at the free condition are higher than those at the fixed condition, which are nearly constant for all wavelengths. The wake velocity in waves is higher than that in calm water, and is accelerated where the wave crest locates on the propeller plane. When the vertical motion at the stern goes upward, the wake velocity also accelerated.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.5
• /
• pp.410-419
• /
• 2016

With the aim of reducing greenhouse gas emissions by 20 percent by 2020 and by 50 percent by 2050 from their 2005 level, International Maritime Organization (IMO) regulated the emissions of SOx and NOx by setting the emission control area in 2012. Since these environmental regulations have been reinforced, demands for the LNG fuel ships are expected to increase dramatically. Accordingly, the worldwide shipbuilding companies spur the development of the LNG fueled ships. Therefore, it is essential to carry out the research on the development of LNG fuel tank, which is one of the important components of the LNG fuel supply system. In this study, the deliberate finite element analysis of type-B LNG fuel tank for 10,000 TEU containership was carried out to evaluate structural safety and provide the process for analyzing stress levels and evaluating fatigue life of target structural. In particular, thermo-structural analysis and fatigue analysis were carried out using the databases on materials and structures of LNG fuel tank.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.113-121
• /
• 2010

Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.577-582
• /
• 2015

This paper is the fundamental study for the application of cold storage system to the transportation equipment by sea and land. This numerical study presents the solid-liquid phase change phenomenon of calcium chloride solution of 30wt %. The governing equations are 1-dimensional unsteady state heat transfer equations of $1^{st}$ order partial differential equations. This type of latent heat storage material is often usable in fishery vessel for controlling the temperature of container with constant condition. The governing equation was discretized with finite difference method and the program was composed with Mathcad program. The main parameters of this solution were the initial temperature of heat storage material, ambient temperature of cold air and the velocity of cold air. The data of boundary layer thickness becomes thin with the increasing of cold air flowing velocity and also the heat storage completion time become shorten.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.139-144
• /
• 2006

Recently, ships' average navigation speed become faster than before because of the increasing of high-speeds vessel including container ships and passenger-ferries. So, it is considered that the speed limit in the navigation channel in Korea isn't proper for vessel management in these days. Also, there is rare paper studies about the speed limit quantitatively and numerically, especially the speed limit is discussing continuously, as abrogation of Incheon Port's speed limit and alleviation of Gwang-yang Port's speed limit according to the requests by the navigating mariners. Consequently this paper deals with the effectiveness of speed limits using the Environmental Stress Model, after replay of the navigation traffic flow in the straight waterway using marine traffic flow simulation technique.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.1
• /
• pp.1-9
• /
• 2021

In the present study, the model-scale Propeller Open Water (POW) tests for the propeller of 176K bulk carrier and 8600TEU container ship were conducted through Computational Fluid Dynamics (CFD) simulation. In order to solve the incompressible viscous flow field, the Reynolds-averaged Navier-Stokes (RaNS) equations were employed as the governing equations. The γ-Reθ(gamma-Re-theta) transition model combined with the SST k-ωturbulence model was introduced to describe the laminar-turbulence transition considering the low Reynolds number of model-scale. Firstly, the flow simulation developing over a flat plate was performed to verify the transition modeling, in which the wall shear stresses were compared with experiments and other numerical results. Then, to investigate the effect of the model, the CFD simulation for the POW test was performed and the simulated propeller performance was validated through comparison with the experiment conducted at Korea Research Institute of Ships & Ocean Engineering (KRISO).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.369-376
• /
• 2021

The International Maritime Organization has developed the Energy Efficiency Design Index, an index related to carbon dioxide emissions, to enforce regulations on newly built ships. In this study, a new type of energy-saving device called the ring stator was used for 158k crude oil carriers, whose hull form was developed as a very thin after-body hull to reduce the resistance by delaying separation. The Energy-Saving Device (ESD) particularly involving the duct, is not adapted to the thin-after body hull form-like container ship. This new ring stator was developed considering these characteristics. A parametric study was conducted through Computational Fluid Dynamics (CFD) analysis using the Star-CCM+ program, and approximately 3.4 % improvement in propulsion efficiency was achieved. Further optimization investigations and experimental studies should be conducted in the future.

• Structural Monitoring and Maintenance
• /
• v.10 no.1
• /
• pp.25-42
• /
• 2023

Despite the significance of ports as critical economic infrastructure, the berth facilities usually deteriorate due to heavy loading, unloading, aging, environmental weather conditions, marine growths, and lack of efficient maintenance management. Marine berths require proactive maintenance management to limit deterioration and defects as no berth facility is maintenance-free. Thus, delay in carrying out maintenance work for the marine berths can be devastating to the operational process involving ship entry, loading, and unloading operations. The aim of this research is to coordinate both operations work, and maintenance works that take place inside the berth of a local industrial port in Saudi Arabia, by developing a novel framework that integrates both works without affecting the efficiency and functionality of the berth. The study focused on defining the operational process of the port and identifying the elements with direct and indirect effects. In addition to determining the priority for the entry of ships inside the berth, it also identified the factors involved in designing a framework that included maintenance work as a component of the monthly berth occupancy schedule. By applying a mathematical model, a framework was established, which includes all the important elements of the process. As a result of the mathematical method formulation process, a database was designed that organizes and coordinates the operations of all berths within the port. This creates time to carry out the required maintenance work monthly as well as ease of coordination with the contractors responsible for the implementation of those works.

• Korea Trade Review
• /
• v.45 no.6
• /
• pp.157-179
• /
• 2020

This study presented the results of meta-analysis through topic modeling among the papers published in the Journal of the International Trade Association for the purpose of presenting academic research trends in the field of trade insurance and future research directions. Among the total 2,010 papers included in the Journal of the Korea International Trade Association, the analyzed paper covers the subject of trade-related insurance. According to detailed topics, 33 marine insurance (42.31%), 16 export insurance (20.51%), 11 hull insurance (14.10%), and 18 others (23.08%), and 4 other products liability insurance. According to the empirical analysis results, Topic 1 was classified as marine insurance, airworthiness, notice obligation, and collateral, and Topic 2 was derived as a representative topic for loading insurance, emergency risk, and immunity as export insurance. And Topic 3 was classified as vessel, sinking and container in relation to ship insurance, and Topic 4 was analyzed as an important topic such as manufacture and British marine insurance. Through the analysis results, we selected the representative topic used for the trade insurance topic and looked at the status of major research. Trade insurance is an area that requires the development of more theoretical and practical research subjects as an optimal risk management means in international trade transactions. To this end, first, support from the Korea International Trade Association is needed to establish a continuous research subject sharing system for the development of research subjects in the field of trade insurance. Second, academic journal operation management must be continuously managed in which academic research papers can be submitted and published.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.191-198
• /
• 2024

Korea is an import and export-oriented economy that relies on shipping transportation, and sea ports play an important role in national economic growth. To secure and maintain the competitiveness of these ports, hardware and software investments are required, but policy support can also be expected to have an effect. This study identified the irrationality of the system by exploratory analysis of the port facility fee discount system for Ulsan Port, an energy hub port, and suggested improvement measures to resolve it.This study analyzed the volume of Ulsan Port and the reduction of port facility usage fees for about 10 years and identified irrational factors that despite a special port for liquid cargo, a considerable reduction for container cargo is concentrated, and even because it was a passing ship, 100% reduction for entrance and clearance fees were provided to them, which could cause serious moral hazard.. As a way to improve the port facility charge discount system at Ulsan Port, this study proposed strengthening support for eco-friendly activities to support containers, adjusting the reduction rate for passing ships, or improving the reduction and exemption application process.