• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.330-334
• /
• 2017

Container-based virtualization reduces performance overhead compared with other virtualization technologies and guarantees an isolation of each virtual execution environment. So, it is being studied to block access to host resources or container resources for sandboxing in restricted system resource like embedded devices. However, because security threats which are caused by security vulnerabilities of the host OS or the security issues of the host environment exist, the needs of the technology to prevent an illegal accesses and unauthorized behaviors by malware has to be increased. In this paper, we define additional access permissions to access a virtual execution environment newly and control them in kernel space to protect attacks from illegal access and unauthorized behaviors by malware and suggest the Container Access Control to control them. Also, we suggest a way to block a loading of unauthenticated kernel driver to disable the Container Access Control running in host OS by malware. We implement and verify proposed technologies on Linux Kernel.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.175-189
• /
• 2024

Following the introduction of containerized sea transportation, the size of container ships has progressively increased. While the primary objective of this enlargement is to achieve economies of scale, it significantly affects the operational environment of ports where these ships dock, raising concerns about the validity of efficiency gains from ultra large container vessels from a port operational perspective. This study evaluates the efficiency of various ship sizes from January to December 2022, utilizing internal data from the container terminals A and B located in the Busan New Port. The analysis encompasses ships affiliated with The Alliance at Container Terminal A and those associated with 2M at Container Terminal B. Key input variables considered for the study include ship size (TEU), total berth time, and loading/unloading time, with cargo handling performance serving as the only output variable. The findings indicate that larger ship sizes exhibit higher efficiency compared to smaller container ships.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.517-523
• /
• 2004

The container load planning is one of key factors for efficient operations of handling equipments at container ports. When the number of containers are large, finding a good solution using the conventional genetic algorithm is very time consuming. To obtain a good solution with considerably small effort, in this paper a pseudo-parallel genetic algorithm(PPGA) based on both the migration model and the ring topology is developed The performance of the PPGA is demonstrated through a test problem of determining the optimal loading sequence of the containers.

• IE interfaces
• /
• v.24 no.2
• /
• pp.164-172
• /
• 2011

H maritime company in Korea had a long history of difficulty in obtaining enough empty containers to transport its commodities. Despite efforts to resolve the problem, the repositioning of empty containers between depots was still planned manually, which consumed much worker time. To automate the generation of reposition plans, we developed a planning system to optimize the company's reposition of empty containers between global depots with a linear programming model functioning as a key decision engine in the system. The model determines the route, volume and mode of transportation for repositioning empty containers from depots with surplus containers to those requiring containers, as well as the empty space of ships generated from the unloading or loading of full and empty containers. The system has been in operation in the company's global network since March 2008.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1033-1040
• /
• 2004

Utilizing of the geotextile container shows several advantages such as standardized construction, factory manufactured products, the control of quality, workability. and economical point of view. Recently this technique can be applied to rehabilitate the loss of rail roadbed due to the heavy rainfall. In this study, a large-scale laboratory test were conducted with simulation of static performance on the geotextile container reinforced rail roadbed. Based on the laboratory test results, the vertical pressure distribution with respect to the depth, and settlement of rail roadbed were measured and compared test results between geotextile container reinforced case and unrein forced case. Thus, the effectiveness of reinforcement was evaluated in terms of its performance and stability.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.710-715
• /
• 2001

This research is presented for optimizing the coefficients of spring and damper by impact load which is applied to a trailer when the containers are loaded up trailer. The procedure utilize the condition that two containers, initial velocity of container, initial height of container and maximum of suspension stroke. The coefficients of spring and damper are calculated numerically through Newmark method uses finite difference expansions. The procedure of calculation is applied by one DOFs of mass-spring-damper system. The coefficients of spring and damper have large value as increase of height or decrease of stroke. The result of calculation is investigated and is used AGV design.

• Transactions of Materials Processing
• /
• v.25 no.4
• /
• pp.227-234
• /
• 2016

In the transportation between countries using container, too many empty containers must be transported due to the transportation unbalance. For transportation efficiency, therefore, foldable containers are being developed. Hinge brackets are important parts of foldable containers because great force is applied on the hinges during loading onto and unloading from ships. In this study, the hinge bracket for a foldable container is designed to be made using thick plate or bulk materials to endure the heavy loads. The forming process for the hinge bracket using a thick plate is designed via numerical analysis. First of all, the shape of bracket is designed for the better formability. Bending and successive side wall thickening processes are employed for the forming of the hinge bracket. Maximum thickening that can be achieved in a single stage of forming without a folding defect is determined and three stage of thickening processes are designed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.1
• /
• pp.63-72
• /
• 1989

The influences of the wideness of pram in designing aftbody of container vessels are investigated. The large transverse KM value of the wide pram aftbody is likely to be regarded as having exellent cargo loading capacity. However the remarkable stability loss under the certain wave conditions, unfavorable situation for structural arrangement and the possibilities of poor vibration and speed-power performances should be considered in case of adopting the wide pram aftbody.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.212-216
• /
• 2001

Recently, it has been trending toward speed-up not only in the passenger car but in the freight cu. In this study, we thus performed stress analysis for the carbody for high speed container freight car in use and field test of the freight car in Gyungbu-line so that we may utilize the results as a design guide for speed-up hereafter- Five vertical loading conditions due to dynamic effect and the weight of the carbody and the container applied to locking devices of the carbody and its results are compared with that of a test, As a result, we found that there is need to complement the strength of the carbody in some measure when speed up the present freight car.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.363-369
• /
• 1999

In these days, there are a lot of studies in the port automation, for example, unmanned container trasporter, unmanned gantry crain, and automatic terminal operation systems and so on. In terms of loading and unloading equipments. we can consider container transporter. This paper describes the automatic control for the UCT(unmanned container transporter), especially steering control systems. UCT is now operated on ECT port in Netherland and tested on PSA ports in Singapore. So we present a design on the controller using neural network PID(NNPID) controller to control the steering system and we use the neural network self-tuner to tune the PID parameters. The computer simulations show that our proposed controller has better performances than those of the other.