• Membrane and Water Treatment
• /
• v.13 no.5
• /
• pp.235-243
• /
• 2022

The paper presents the effect of operating temperatures and flow rates on the distillate flux that can be obtained from a hydrophobic membrane having the characteristics: pore size of 0.15 ㎛; thickness of 130 ㎛; and 85% porosity. That membrane in the present investigation could be the direct contact (DCMD) or the air-gap membrane distillation (AGMD). To model numerically the membrane distillation processes, the two-dimensional computational fluid dynamic (CFD) is used for the DCMD and AGMD cases here. In this work, DCMD and AGMD models have been validated with the experimental data using different flows (Parallel and Counter-current flows) in non-steady-state situations. A good agreement is obtained between the present results and those of the experimental data in the literature. The new approach in the present numerical modeling has allowed examining effects of the nature of materials (Polyvinylidene fluoride (PVDF) polymers, copolymers, and blends) used on thermal properties. Moreover, the effect of the area surface of the membrane (0.021 to 3.15 ㎡) is investigated to explore both the laminar and the turbulent flow regimes. The obtained results found that copolymer P(VDF-TrFE) (80/20) is more effective than the other materials of membrane distillation (MD). The mass flux and thermal efficiency reach 193.5 (g/㎡s), and 83.29 % using turbulent flow and an effective area of 3.1 ㎡, respectively. The increase of feed inlet temperatures and its flow rate, with the reduction of cold temperatures and its flow rate are very effective for increasing distillate water flow in MD applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.10-16
• /
• 2021

This paper proposes a model that considers the parity-time symmetric structure as a state detection circuit for sensor applications using a stretchable inductor. In particular, to obtain a more practical computer simulation result, the stretchable inductor model was applied to this study model by referring to previously reported experimental results. The resistance component and phase component were controlled through the negative differential resistance circuit used in this study. In addition, the imbalance of the circuit caused by a change in the characteristics of the stretchable inductor could be compensated for using a negative differential resistance circuit. In particular, an analysis of the frequency characteristics of the sensor driving circuit of the parity-time symmetric structure proposed in this study confirmed that the Q-factor could be increased up to 20 times compared to the conventional resonant circuit.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.5
• /
• pp.93-100
• /
• 2022

Korea's ancestral culture has limited travel and contact due to Corona (COVID-19). In addition, Korean ancestral culture meets in person to commemorate the deceased. In this paper, we propose a non-face-to-face metaverse memorial platform service that can commemorate the deceased and perform ancestral rites in the cyber world (virtual reality) by applying the metaverse technology. The services proposed in the study consisted of a remembrance hall that displays the life story of the deceased, a ancestral hall that conducts ancestral rites for the deceased, and a deceased pavilion that checks the remains and wills of the deceased. In addition, the virtual reality device (HMD: Head Mounted Display) set the teleportation and content resolution to 4K to minimize dizziness. In particular, the priests applied interaction technology to provide an immersive service for ancestral rites between family members. The researched memorial hall metaverse service is a metaverse-based platform service that allows anyone to commemorate the deceased as a family unit in a non-face-to-face state rather than face-to-face.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.171-179
• /
• 2022

This paper introduces a monitoring and tracking system for corona19 confirmed patients based on the collected data by installing a device that can manage the access list at the entrance to each building on the campus. The existing QR-based electronic access list can't measure the temperature of the person entering the building and it is inconvenient that members have to scan their QR codes with a smartphone. In addition, when the state manages information about confirmed patients and contacts on campus, it is not easy for members to quickly share and track information. These could lead to cases where a person is in close contact with an infected person developing another patient. Therefore, this paper introduces a device using face recognition library and a temperature sensor installed at the entrance of each building on the campus, enabling the administrator to monitor the access status and quickly track members of each building in real-time.

• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.175-182
• /
• 2023

In general, the design of structures and its construction processes are fundamentally dependent on their foundation and supporting ground. Thus, it is imperative to understand the behavior of the soil under certain stress and drainage conditions. As it is well known that certain characteristics and behaviors of soils with fines are highly dependent on water content, it is critical to accurately measure and identify the status of the soils in terms of water contents. Liquid limit is one of the important soil index properties to define such characteristics. However, liquid limit measurement can be affected by the proficiency of the operator. On the other hand, dynamic properties of soils are also necessary in many different applications and current testing methods often require special equipment in the laboratory, which is often expensive and sensitive to test conditions. In order to address these concerns and advance the state of the art, this study explores a novel method to determine the liquid limit of cohesive soil by employing video-based vibration analysis. In this research, the modal characteristics of cohesive soil columns are extracted from videos by utilizing phase-based motion estimation. By utilizing the proposed method that analyzes the optical flow in every pixel of the series of frames that effectively represents the motion of corresponding points of the soil specimen, the vibration characteristics of the entire soil specimen could be assessed in a non-contact and non-destructive manner. The experimental investigation results compared with the liquid limit determined by the standard method verify that the proposed method reliably and straightforwardly identifies the liquid limit of clay. It is envisioned that the proposed approach could be applied to measuring liquid limit of soil in practical field, entertaining its simple implementation that only requires a digital camera or even a smartphone without the need for special equipment that may be subject to the proficiency of the operator.

• Analyses & Alternatives
• /
• v.1 no.1
• /
• pp.44-64
• /
• 2017

Russia's push in the Asia-Pacific region stems from its interests that have the national, regional and global dimensions. In their turn, the aims of this policy are civilizational, geopolitical, economic and prospective, with a long-term outlook. In the course of their achievement, cooperation with Northeast Asia's countries will play one of the key roles owing to the factors of geographic proximity, Northeast Asia's economic potential, risk hedging and a growing influence Northeast Asia exerts upon the global development. A new cooperation paradigm between Russia and the states of Northeast Asia should be based upon establishing and cementing self-reproducing ties. This is the central aim of Russian initiatives in relations, with Japan, the Republic of Korea, Democratic People's Republic of Korea, Mongolia and China. However, numerous obstacles ranging from Russia's absence in the regional free trade agreements and supply-production chains of value-added production to the permanent international instability generated by Pyongyang's missile-nuclear developments hamper the practical implementation of this task. Realizing the necessity to give an additional impetus to this new cooperative paradigm, Russia has to develop directions with an apparent consolidating effect. The most promising may be the establishment of a permanent security forum based upon Northeast Asia Peace and Security Mechanism chaired by the Russian Federation. The urgency of this measure and its expected support stem from the necessity to strengthen security in Northeast Asia, a task neither the US-led hub-and-spoke system nor ASE-AN-led multilateral dialogue venues have been able to resolve. The issues addressed at the security forum must include the unification of approaches to North Korean nuclear issue and producing a document specifying actions of the claimants on the disputed maritime territories in the "direct contact" situations. At the expert level, Russia has elaborated on the idea to establish such a forum outlining the spectrum of the key directions of cooperation. With the urgency in the establishment of this dialogue venue, its agenda has to be coordinated with the agendas of the existing security systems presented by the US alliances and the ASE-AN-led multilateral negotiations. The practical implementation of this initiative will strengthen security in Northeast Asia as its challenges will be resolved in the pre-emptive way based on coordinated approaches. Therefore, Russia as the Eurasian state will be one of the role players in the advent of the Asian century.

• Convergence Security Journal
• /
• v.23 no.5
• /
• pp.165-172
• /
• 2023

Nation-state social engineering attacks are steadily being carried out as they are highly effective attacks, primarily to gain an advantage over secret information, diplomatic negotiations or future policy changes. As The Ukraine-Russia war prolongs, the activities of global hacking organizations are steadily increasing, and large-scale cyberattack attempts against major infrastructure or global companies continue, so a countermeasure strategy is needed. To this end, we determined that the social engineering attack cycle excluding physical contact among various social engineering models is the most suitable model, and analyzed the preferred social engineering attack method by comparing it with geopolitical tactics through case analysis. AS a result China favors phishing attacks, which prefer quantity over quality, such as man-made tactics, Russia prefers covert and complex spear phishing reminiscent of espionage warfare, and North Korea uses geopolitical tactics such as spear phishing and watering holes for attacks on the US and South Korea Most of the other countries aimed to secure funds with ransomware. Accordingly, a Clean Pass policy for China, periodic compulsory education in Russia, and international sanctions against North Korea were presented as countermeasure strategies.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.455-462
• /
• 2004

In this paper, we measured and analysised the power change of tear lens for 85 patients - 170 myopia eyes - who are fitted using RGP lens, considering the BGR of RGP lens, the corneal astigmatism power, and corneal curvature. We got the following results from these experiments; 1. When the BCR of RGP lens changes, the diopters of tear lens of "on-k", 0.05Pt, 01.0Ft, 0.05St, and 0.10St are -0.25D, -0.46D, -0.63D, +0.07D, and +0.26D, respectively. 2. When the corneal astigmatism power changes, the diopters of tear lens of group below 0.75D, group of 1.00D~1.25D, group of 1.50D~1.75D, and group over 2.00D in "on-k" state, are -0.25D, -0.18D, -0.09D, and -0.39D, respectively. 3. When the corneal astigmatism power changes and the BCR of test lens is changed by 0.05mm step, the change values of tear lens diopter for 0.05St and 0.05Ft approximate to ${\pm}0.25D$, while these for 0.10St and 0.10Ft don't approximate to the value below ${\pm}0.25D$.[are irregular value below ${\pm}0.25D$.] 4. When the corneal curvature and the HCR of RGP lens change, the diopters of tear lens of group below 7.50mm, group of 7.55~7.80mm, group of 7.85~8.20mm, and group over 8.25mm in "on-k" state, are -0.40D, -0.11D, -0.20D, and -0.19D, respectively. 5. When the BCR of test lens is changed by 0.05mm step and the corneal curvature increases, the change values of tear lens diopter decrease, while these over 8.25mm are mean value ${\pm}0.17D$ and the value below ${\pm}0.25D$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Neonatal Medicine
• /
• v.18 no.1
• /
• pp.137-142
• /
• 2011

Purpose: In relation to perinatal healthcare, medical institutions and resources are limitative and also are in a state of flux due to the therapeutic specialty. We analyzed requests for interhospital transfers received by Busan 1339 Emergency Medical Information Center (EMIC) to grasp the state of perinatal healthcare delivery system. Methods: This study was conducted on the basis of data inputted into the computing system of Busan 1339 EMIC, between January 1 and December 31, 2009. In connection with 378 pregnant women and 136 newborns who were required to transfer, retrospective analyses were made of the success rate of transfer (SR), the number of contacted hospitals, the time required for transfer and the reason of transfer and refusal. Results: In the case of pregnant women, the SR were 65.5%. They came in contact with 2.7 hospitals, and it took 24.4 minutes. As for the reason of transfer, preterm labor accounted for the highest proportion. In the case of newborns, the SR were 71.3%. They came in contact with 2.4 hospitals, and it took 15.6 minutes. The most common reason of transfer were respiratory symptoms. In the reason of refusal with pregnant women and newborn, the lack of medical staff, medical equipments and wards accounted for great. Conclusion: Many pregnant women and newborns have been transferred to hospitals by EMIC, but the SR has not been higher yet. Accordingly, there is a need to evaluate the propriety of perinatal treatment system, as well as to set up effective perinatal healthcare delivery system.