• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.18 no.4
• /
• pp.12-21
• /
• 2022

Steam assisted gravity drainage(SAGD) is a process that drills well in the underground oil sands layer, injects hightemperature steam, lowers the viscosity of buried bitumen, and recovers it to the ground. Recently, direct contact steam generator(DCSG) is being developed to maximize steam efficiency for SAGD process. The DCSG requires high technology to achieve pressurized combustion and steam generation in accordance with underground pressurized conditions. Therefore, it is necessary to develop a combustion technology that can control the heat load and exhaust gas composition. In this study, process analysis of high-pressurized DCSG was conducted to apply oxygen enrichment technology in which nitrogen of the air was partially removed for increasing steam production and reducing fuel consumption. As the process analysis conditions, methane as the fuel and normal air or oxygen enriched air as the oxidizing agent were applied to high-pressurized DCSG process model. A simple combustion reaction program was used to calculate the property variations for combustion temperature, steam ratio and residual heat in exhaust gas. As a major results, the steam production efficiency of DCSG using the pure oxygen was about 6% higher than that of the normal air due to the reducing nitrogen in the air. The results of this study will be used as operating data to test the demonstration device.

• Composites Research
• /
• v.19 no.2
• /
• pp.7-12
• /
• 2006

Graphite particle/carbon fiber hybrid conductive polymer composites were fabricated by the compression molding technique. Graphite particles were mixed with an epoxy resin to impart the electrical conductivity in the composite materials. In this study, graphite reinforced conductive polymer composites with high filler loadings were manufactured to accomplish high electrical conductivity above 100S/cm. Graphite particles were the main filler to increase the electrical conductivity of composites by direct contact between graphite particles. While high filler loadings are needed to attain good electrical conductivity, the composites becomes brittle. So carbon fiber was added to compensate weakened mechanical property. With increasing the carbon fiber loading ratio, the electrical conductivity gradually decreased because non-conducting regions were generated in the carbon fiber cluster among carbon fibers, while the flexural strength increased. In the case of carbon fiber 20wt.% of the total system, the electrical conductivity decreased 27%, whereas the flexural strength increased 12%.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.2
• /
• pp.182-192
• /
• 2022

Objectives: Understanding the factors influencing mothers' decision to breastfeed their infants is essential to formulate effective breastfeeding interventions. This study explored the determinants of optimal breastfeeding indicators in Indonesia. Methods: We used the 2017 Indonesia Demographic and Health Survey to analyze factors associated with early initiation of breastfeeding, exclusive breastfeeding (EBF), and continued breastfeeding at 1 year (CBF-1) and 2 years (CBF-2). Multivariate logistic regression models were used to examine bio-demographic, socio-cultural, and behavioral characteristics associated with breastfeeding after considering the survey design effect. Results: The risk of delayed breastfeeding initiation was higher among infants who were born smaller, first-born children, were delivered via cesarean delivery, and did not have immediate skin-to-skin contact (p<0.01). Infant's age, birth pattern, household wealth index, and the mother's occupation and smoking status were predictors of EBF (p<0.05). CBF-1 was less common among first-time mothers and those working in the non-agricultural sector, mothers from wealthier families, and mothers who had cesarean deliveries (p<0.01). Infant's age was negatively associated with CBF-2 (adjusted odds ratio [aOR], 0.85; 95% confidence interval [CI], 0.74 to 0.99). Mothers attending college were less likely to practice CBF-2 than those with no education or primary education (aOR, 0.45; 95% CI, 0.26 to 0.77). The absence of postnatal visits was a risk factor for CBF-1 and CBF-2 (p<0.05). Conclusions: Breastfeeding interventions in Indonesia should pay particular attention to at-risk groups such as women from wealthier families, working outside the agricultural sector, and with a higher education level. Nutrition-sensitive programs (e.g., postnatal care and smoking cessation) should also be encouraged.

• Journal of Periodontal and Implant Science
• /
• v.53 no.3
• /
• pp.218-232
• /
• 2023

Purpose: This study evaluated the efficacy of a tube-shaped poly(ε) caprolactone - β tricalcium phosphate (PCL-TCP) scaffold with the incorporation of human umbilical cord-derived mesenchymal stem cells (hUCMSCs) and platelet-rich plasma (PRP) for bone regeneration in the procedure of single-stage sinus augmentation and dental implantation in minipigs. Methods: Implants were placed in the bilateral sides of the maxillary sinuses of 5 minipigs and allocated to a PCL-TCP+hUCMSCs+PRP group (n=5), a PCL-TCP+PRP group (n=5), and a PCL-TCP-only group (n=6). After 12 weeks, bone regeneration was evaluated with soft X-rays, micro-computed tomography, fluorescence microscopy, and histomorphometric analysis. Results: Four implants failed (2 each in the PCL-TCP+hUCMSCs+PRP and PCLTCP+hUCMSC groups). An analysis of the grayscale levels and bone-implant contact ratio showed significantly higher mean values in the PCL-TCP+hUCMSCs+PRP than in the PCL-TCP group (P=0.045 and P=0.016, respectively). In fluoromicroscopic images, new bone formation around the outer surfaces of the scaffolds was observed in the PCLTCP+hUCMSCs+PRP group, suggesting a tenting effect of the specially designed scaffolds. Bone regeneration at the scaffold-implant interfaces was observed in all 3 groups. Conclusions: Using a tube-shaped, honeycombed PCL-TCP scaffold with hUCMSCs and PRP may serve to enhance bone formation and dental implants' osseointegration in the procedure of simultaneous sinus lifting and dental implantation.

• Steel and Composite Structures
• /
• v.50 no.4
• /
• pp.383-401
• /
• 2024

The research comprehensively studies the axial compression performance of T-shaped concrete-filled thin-walled steel tubular (CTST) long columns after fire exposure. Initially, a series of tests investigate the effects of heating time, load eccentricity, and stiffeners on the column's performance. Furthermore, Finite Element (FE) analysis is employed to establish temperature and mechanical field models for the T-shaped CTST long column with stiffeners after fire exposure, using carefully determined key parameters such as thermal parameters, constitutive relations, and contact models. In addition, a parametric analysis based on the numerical models is conducted to explore the effects of heating time, section diameter, material strength, and steel ratio on the axial compressive bearing capacity, bending bearing capacity under normal temperature, as well as residual bearing capacity after fire exposure. The results reveal that the maximum lateral deformation occurs near the middle of the span, with bending increasing as heating time and eccentricity rise. Despite a decrease in axial compressive load and bending capacity after fire exposure, the columns still exhibit desirable bearing capacity and deformability. Moreover, the obtained FE results align closely with experimental findings, validating the reliability of the developed numerical models. Additionally, this study proposes a simplified design method to calculate these mechanical property parameters, satisfying the ISO-834 standard. The relative errors between the proposed simplified formulas and FE models remain within 10%, indicating their capability to provide a theoretical reference for practical engineering applications.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.13.1-13.11
• /
• 2022

Background: Work is an inseparable element of a person's life, and violence in the workplace has various effects on individual workers and companies. While most studies have focused on specific industries, very few studies have investigated the influence of workplace violence by co-workers. Therefore, this study aimed to evaluate the association between workplace violence and work-related depression/anxiety in various occupations by differentiating the perpetrators of violence as co-workers and clients. Methods: This study was conducted based on data from the 4th and 5th Korean Working Conditions Surveys (KWCS). The experience of workplace violence was classified in terms of the perpetrator: workplace violence by co-workers and that by clients. Work-related depression and anxiety were assessed using questions about health problems related to depression and anxiety and whether the problems were related to work. Descriptive statistics, χ² tests, and multiple logistic regression analyses were performed using the SPSS 26.0. Results: After adjusting for sociodemographic characteristics (age, education, income, subjective health status) and occupational characteristics (occupation, weekly working hours, type of employment, size of workplace, and shift work), male workers with experience of workplace violence by co-workers were found to be at a higher risk of work-related depression/anxiety (odds ratio [OR], 11.52; 95% confidence interval [CI], 8.65-15.36). The same was confirmed for female workers (OR, 10.89; 95% CI, 7.90-15.02). Conclusions: Employees who experienced workplace violence from co-workers were found to be more vulnerable to work-related depression/anxiety. Continuous contact between the victim and the perpetrator may occur, and the possibility of a secondary assault can frighten the victim. Appropriate prevention and intervention measures that focus on the perpetrators of violence are needed.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.219-226
• /
• 2010

In order to evaluate a removal characteristic of chloramphenicol, salicylic acid and ketoprofen according to dose of oxidants, $Cl_2$, $O_3$ and $O_3/H_2O_2$ are used as oxidants in this study. In case of that $Cl_2$ is used for oxidizing harmaceuticals, chloramphenicol, salicylic acid and ketoprofen is not removed entirely at $Cl_2$ dose rang of 0.5~5.0 mg/L for 60 min. However, removal tendency of salicylic acid is so obviously at $Cl_2$ dose higher than 1.0 mg/L. In addition, as $Cl_2$ dose and contact time increase, the removal rate of salicylic acid is enhanced. When $O_3$ is used as oxidant, chloramphenicol and ketoprofen is not eliminated at $O_3$ dose range of 0.2~2.0 mg/L. On the contrary, 30~70% of salicylic acid is removed at $O_3$ dose of 1.0~5.0 mg/L. Only 30% removal of salicylic acid is achieved at contact time of 5 min, however, the removal rate is enhanced remarkably at contact time over 10 min. In experiments using $O_3/H_2O_2$ as an oxidant, we can find that $O_3/H_2O_2$ is much more effective than $O_3$ only for removal of 3 pharmaceuticals, and the efficiency is raised according to increase of $H_2O_2$ dose. On reaction rate constant and half-life of 3 pharmaceuticals depending on $Cl_2$, $O_3$ and $O_3/H_2O_2$ dose, experiments using $O_3/H_2O_2$ show that oxidation of pharmaceuticals is less effective as the $H_2O_2/O_3$ ratio increases to above pproximately 1.0 related to reaction rate constant. An oxidation of salicylic acid by $Cl_2$ and $O_3$ particularly has a comparatively high reaction rate constant comparing $O_3/H_2O_2$, and thus salicylic acid is easily eliminated in oxidation processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• Journal of Sasang Constitutional Medicine
• /
• v.9 no.1
• /
• pp.315-337
• /
• 1997

In order to compare the dffects of $Galg{\breve{u}}nhaegit'ang$(葛根解肌湯) of "Dongeuisusebowon(東醫壽世保元)and Won's(元)-$Galg{\breve{u}}nhaegit'ang$(葛根解肌湯) of "Dongeuisasansinpyun(東醫四象新編)" on the immune respone, Sprague-Dawley male rats were used and randomly divided into four groups. Normal group was under normal condition, Control group was injected i.v. with 2mg/kg Methotrexate(MTX) on the 9th day and 11th day after sensitization with SRBC on the 5th day, $Galg{\breve{u}}nhaegit'ang$ group was fed with 1ml of $Galg{\breve{u}}nhaegit'ang$ and Won's-$Galg{\breve{u}}nhaegit'ang$ group was fed with 1ml of Won's-$Galg{\breve{u}}nhaegit'ang$ by oral during eighteen days. In the 9th day and the 11th day after oral feeding with medication, MTX was injected in tail of rats in order to reduce immune function. Leukocyte count, lymphocyte ratio, lymphocyte count of spleen, lymphocyte count of bone marrow, contact hypersensitivity to DNFB, morphologic change of thymus cell, and electropherogram of serum protein were estimated and compared according to the group. The results are as follows : 1. Before and after MTX injection, leukocyte(WBC) count was increased signigicantly in Won's-$Galg{\breve{u}}nhaegit'ang$ group compared to control group. $Galg{\breve{u}}nhaegit'ang$ group had no significant difference compared to control group. 2. Before and after MTX injection, lymphocyte ratio was not significantly different in Won's-$Galg{\breve{u}}nhaegit'ang$ group and in $Galg{\breve{u}}nhaegit'ang$ group compared to control group. 3. The lymphocyte count of spleen was increased significantly in $Galg{\breve{u}}nhaegit'ang$ group compared to control group and Won's-$Galg{\breve{u}}nhaegit'ang$ group. Won's-$Galg{\breve{u}}nhaegit'ang$ group had no significant difference compared to control group. 4. The lymphocyte count of bone marrow was increased significantly in Won's-$Galg{\breve{u}}nhaegit'ang$ group compared to control group and $Galg{\breve{u}}nhaegit'ang$ group. $Galg{\breve{u}}nhaegit'ang$ group had no significant difference compared to control group. 5. Contact hypersensitivity was increased significantly in Won's-$Galg{\breve{u}}nhaegit'ang$ group compared to other group. $Galg{\breve{u}}nhaegit'ang$ group had no significant difference compared to control groups. 6. In the morphologic change of thymus cell, control group compared to normal group had a indistinct boundary between cortex and medulla and lymphocyte cell density of thymus was low. $Galg{\breve{u}}nhaegit'ang$ group and Won's-$Galg{\breve{u}}nhaegit'ang$ group compared to control group had a definite boundary between cortex and medulla and lymphocyte cell density of thymus was high. 7. In the SDS-PAGE electropherogram of serum protein, Won's-$Galg{\breve{u}}nhaegit'ang$ group had a wide band of nearby 25,000 Dalton, and which meant IgG generated more actively. Considering this results, $Galg{\breve{u}}nhaegit'ang$ group and Won's-$Galg{\breve{u}}nhaegit'ang$ group have an effect on the depression of immune function induced by MTX, and especially Won's-$Galg{\breve{u}}nhaegit'ang$ group has an significant effect than $Galg{\breve{u}}nhaegit'ang$ group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.445-456
• /
• 2009

Statement of problem: Many studies have been conducted to improve the primary stability of implants by providing bioactive surfaces via surface treatments. Increase of surface roughness may increase osteoblast activity and promote stronger bonding between bone and implant surface and it has been reported that bioactive surface or titanium can be obtained through alkali and heat treatment. Purpose: The purpose of this study was to evaluate the stability of alkali and heat treated implants via histomorphometric analysis. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface, the other groups were treated for 24 hours in 5 M NaOH solution and heat treated for 1 hour at $600^{\circ}C$ in the atmosphere (group 2) and vacuum (group 3) conditions respectively. Surface characteristics were analyzed and fixtures were implanted into rabbits. The specimens were histologically and histomorphometrically compared according to healing periods and change in bone composition were analyzed with EPMA (Electron Probe Micro Analyzer). Results: 1. Groups treated with alkali and heat showed increase of oxidization layer and Na ions. Groups 2 which was heat treated in atmosphere showed significant increase of surface roughness (P<.05). 2. Histomorphometric analysis showed significant increase in BIC (bone to implant contact) according to increase in healing period and there was significant increases in groups 2 and 3 (P<.05). 3. BA(bone area) ratio showed similar results as contact ratio, but according to statistical analysis there was significant increase according to increase in healing period in group 2 only (P<.05). 4. EPMA analysis revealed no difference in gradation of bone composition of K, P, Ca, Ti in surrounding bone of implants according to healing periods but groups 2 and 3 showed increase of Ca and P in the initial stages. Conclusion: From the results above, it can be considered that alkali and heat treated implants in the atmosphere have advantages in osseointegration in early stages and may decrease the time interval between implantation and functional adaptation.