• 한국재료학회지
• /
• 제33권9호
• /
• pp.353-359
• /
• 2023

This study investigated the growth behavior and characteristics of compounds formed at the interface between a liquid Al-Si-Cu alloy and solid cast iron. Through microstructural analyses, it was observed that various AlFe and AlFeSi phases are formed at the interface, and the relative proportion of each phase changes when small amounts of strontium are added to the Al alloy. The results of the microstructural analysis indicate that the primary phases of the interfacial compounds in the Al-Si-Cu base alloy are Al₈Fe₂Si and Al_4.5FeSi. However, in the Sr-added alloys, significant amounts of binary AlFe intermetallic compounds such as Al₅Fe₂ and Al₁₃Fe₄ formed, in addition to the AlFeSi phases. The inclusion of Sr has a slight diminishing effect on the rate at which the interfacial compounds layer thickens during the time the liquid Al alloy is in contact with the cast iron. The study also discusses the nano-indentation hardness and micro-hardness of the interfacial phases.

• Journal of Astronomy and Space Sciences
• /
• 제27권2호
• /
• pp.89-96
• /
• 2010

BVR CCD observations of GW Cep were made on 15 nights in November through December 2008 with a 1-m reflector at the Jincheon station of the Chungbuk National University Observatory. Nineteen new times of minimum lights for GW Cep were determined and added to a collection of all other times of minima available to us. These data were then intensively analyzed, by reference to an O-C diagram, to deduce the general form of period variation for GW Cep. It was found that the O-C diagram could be interpreted as presenting two different forms of period change: an exclusively quasi-sinusoidal change with a period of 32.6 years and an eccentricity of 0.10; and a quasi-sinusoidal change with a period of 46.2 years and an eccentricity of 0.36 superposed on an upward parabola. Although a final conclusion is somewhat premature at present, the latter seems more plausible because late-type contact binaries allow an inter-exchange of both energy and mass between the component stars. The quasi-sinusoidal characteristics were interpreted in terms of a light-time effect due to an unseen tertiary component. The minimum masses of the tertiary component for both cases were calculated to be nearly the same as the $0.23-0.26M\;{\odot}$-ranges which is hardly detectable in a light curve synthesis. The upward parabolic O-C diagram corresponding to a secular period increase of about $4.12{\times}10^{-8}\;d/yr$ was interpreted as mass being transferred from the lesser to more massive component. The transfer rate for a conservative case was calculated to be about $2.66\;{\times}\;10^{-8}\;M_{\odot}/yr$ which is compatible with other W UMa-type contact binaries.

• 융합정보논문지
• /
• 제11권7호
• /
• pp.47-56
• /
• 2021

본 연구는 우리나라 노인의 성공적 노화에 영향을 미치는 요인을 파악하기 위해 시도된 이차자료분석 연구이다. 2018년 제7차 고령화연구패널 조사 자료를 이용하여 65세 이상의 노인 중 비동거 자녀가 1인 이상이고 연구 변수에 결측치가 없는 4,106명을 대상으로 하였다. 자료는 빈도분석, 교차분석, 독립표본 t검정, 이항 로지스틱 회귀분석으로 분석하였다. 연구 결과 노인의 성공적인 노화에 영향을 미치는 요인은 연령, 배우자 유무, 교육 수준, 주거 형태, 주관적 건강, 운동, 음주, 비동거 자녀와의 비대면 접촉 빈도로 나타났으며 설명력은 24.1%였다. 자녀 결속을 중심으로 노인이 성공적 노화를 영위하기 위해서는 자녀가 가까이 살고 자주 만나는 것보다 노인의 삶의 위로가 되고 관계의 연속으로 삶의 만족도를 높일 수 있는 비대면 연락 빈도가 중요하게 나타났다. 본 연구를 바탕으로 코로나19(COVID-19) 감염 우려로 인해 사회적으로 고립되어 있는 노인들의 성공적인 노화를 위한 다양한 전략이 필요하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2007-2013
• /
• 2017

In order to give hydrophobic surface properties on carbon steel, the fluorinated amorphous carbon films were prepared by using linear 2.45GHz microwave PECVD device. Two different process approaches have been tested. One is direct deposition of a-C:H:F films using admixture of $Ar/CH_4/CF_4$ working gases and the other is surface treatment using $CF_4$ plasma after deposition of a-C:H film with $Ar/CH_4$ binary gas system. $Ar/CF_4$ plasma treated surface with high $CF_4$ gas ratio shows best hydrophobicity and durability of hydrophobicity. Nanometer scale surface roughness seems one of the most important factors for hydrophobicity within our experimental conditions. The properties of a-C:H:F films and $CF_4$ plasma treated a-C:H films were investigated in terms of surface roughness, hardness, microstructure, chemical bonding, atomic bonding structure between carbon and fluorine, adhesion and water contact angle by using atomic force microscopy (AFM), nano-indentation, Raman analysis and X-ray photoelectron spectroscopy (XPS).

• 한국통신학회논문지
• /
• 제19권1호
• /
• pp.120-130
• /
• 1994

전자기기 생산시 기관에 부품을 장착하고 기판 뒷면의 리드선을 절단할 때, 현재까지는 회전절단기를 사용했었는데, 이 방법에서는 한쪽 방향에서만 힘을 가하여 절단함으로써 접촉불량의 한 원인이 되곤 했다. 특히 양면에 부품을 장착하는 경우나 유연한 기관이나 정밀을 요구하는 경우, 부품의 리드선이 매우 굵은 경우에는 사람의 손으로 일일이 절단해야 했다. 그래서 로봇팔을 이용하여 니퍼로 절단하는 방법이 도입되기 시작하였는데, 절단할 리드선의 위치를 하나하나 입력시켜 주어야 했다. 본 논문에서는 여러 방향에서 입력되는 정면도로써 절단할 리스선의 좌표를 구해 내는 방법을 제안하고, 시뮬레이션과 실험을 통하여 실현가능성을 확인하였다. 저가의 감시용 CCD카메라를 이용하여 실험한 결과 88.81%가 1mm이하의 오차를 가졌는데, 적응성 공기압니퍼를 이용한 경우 절단이 가능한 범위ㅣ내이었다. 더욱 정밀한 카메라 및 측정환경을 갖춘다면 본 논문에서 제안하는 방법으로 매우 정밀하게 측정이 가능하리라 사료된다.

• 천문학회지
• /
• 제51권5호
• /
• pp.129-142
• /
• 2018

The DEEP-South (the Deep Ecliptic Patrol of the Southern Sky) photometric census of small Solar System bodies produces massive time-series data of variable, transient or moving objects as a by-product. To fully investigate unexplored variable phenomena, we present an application of multi-aperture photometry and FastBit indexing techniques for faster access to a portion of the DEEP-South year-one data. Our new pipeline is designed to perform automated point source detection, robust high-precision photometry and calibration of non-crowded fields which have overlap with previously surveyed areas. In this paper, we show some examples of catalog-based variability searches to find new variable stars and to recover targeted asteroids. We discover 21 new periodic variables with period ranging between 0.1 and 31 days, including four eclipsing binary systems (detached, over-contact, and ellipsoidal variables), one white dwarf/M dwarf pair candidate, and rotating variable stars. We also recover astrometry (< ${\pm}1-2$ arcsec level accuracy) and photometry of two targeted near-earth asteroids, 2006 DZ169 and 1996 SK, along with the small- (~0.12 mag) and relatively large-amplitude (~0.5 mag) variations of their dominant rotational signals in R-band.

• 천문학회보
• /
• 제44권1호
• /
• pp.80.1-80.1
• /
• 2019

Photometric investigations of asteroids allow us to determine their rotation states and shape models (Apostolovska et al. 2014). Our main target, asteroid (2078) Nanking's perihelion distance (q) is 1.480 AU, which belongs to the Mars-crossing asteroid (1.3 < q < 1.66 AU). Mars-crossing asteroids are objects that cross the orbit of Mars and regarded as one of the primary sources of near-Earth asteroids due to the unstable nature of their orbits. We present the analysis of the spin parameters and 3D shape model of (2078) Nanking. We conducted Cousins_R-band time-series photometry of this asteroid from November 26, 2014 to January 17, 2015 at the Sobaeksan Optical Astronomy Observatory (SOAO) and for 25 nights from March to April 2016 using the Korea Microlensing Telescope Network (KMTNet) to reconstruct its physical model with our dense photometric datasets. Using the lightcurve inversion method (Kaasalainen & Torppa 2001; Kaasalainen et al. 2001), we determine the pole orientation and shape model of this object based on our lightcurves along with the archival data obtained from the literatures. We derived rotational period of 6.461 h, the preliminary ecliptic longitude (${\lambda}_p$) and latitude (${\beta}_p$) of its pole as ${\lambda}_p{\sim}8^{\circ}$ and ${\beta}_p{\sim}-52^{\circ}$ which indicates a retrograde rotation of the body. From the apparent W UMa-shaped lightcurve and its location in the rotation frequency-amplitude plot of Sheppard and Jewitt (2004), we suspect the contact binary nature of the body (Choi 2016).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.16.1-16.8
• /
• 2020

Background: Cyst enucleation, which extracts only the tumor with the application of Carnoy's solution (CS), has been suggested as a conservative treatment with a low recurrence rate and morbidity. However, there has been a concern that CS's contact with inferior alveolar nerve (IAN) can cause neurons to degenerate and cause sensory dysfunction. The purpose of this retrospective cohort study aimed to investigate the neurosensory function after surgical treatment with or without the application of CS. Methods: While controlling the effects of sex, age, follow-up period, and invasion size of the tumor, we performed the binary logistic regression analysis to examine whether or not the sensory function of the patients who were treated with CS (n = 19) for the cyst enucleation procedure was significantly different from those who were not treated with CS (n = 58) at the end of the follow-up period. Results: The logistic regression result showed that the use of CS was not significantly related to the normalness of sensory function at the end of the follow-up period. Rather, the invasion size of the cyst was significantly associated with sensory dysfunction. Conclusions: CS may be used for patients who are diagnosed with OKC and UAM without much fear of its impact on sensory dysfunction. However, a small number of patients who were treated with CS experienced severe sensory damage and did not recover at the end of the follow-up period, suggesting the need for further analysis of these patients.

• 한국광물학회지
• /
• 제29권3호
• /
• pp.155-165
• /
• 2016

붕소가 포함된 다성분계 규산염 용융체의 원자 구조를 규명하는 것은 화산의 분화 양상을 포함한 다양한 지구화학적 과정의 원자 단위 기작을 밝히는데 중요하다. 붕소를 포함한 소듐 알루미노규산염 용융체의 붕소 및 알루미늄 주위의 원자 환경에 관한 자세한 정보는 수용액과 핵폐기물 유리(nuclear waste glasses)의 반응도(reactivity)에 대한 미시적인 설명을 제공한다. 본 연구에서는 붕소가 포함된 비정질 물질의 원자 구조 규명에 가장 적합한 고상 핵자기 공명 분광분석(solid-state nuclear magnetic resonance, solid-state NMR)을 이용하여 붕소의 함량이 비정질 소듐 보레이트($Na_2O-B_2O_3$)와 붕소를 포함한 다성분계 규산염 용융체[말린코아이트(malinkoite, $NaBSiO_4$)와 네펠린(nepheline, $NaAlSiO_4$)의 유사 이원계]의 원자 구조에 미치는 영향을 규명하였다. 비정질 소듐 보레이트의 $^{11}B$ MAS NMR 스펙트럼을 통해 붕소의 함량이 증가함에 따라 배위수가 3인 붕소($^{[3]}B$)가 증가한다는 것이 확인되었다. 비정질 말린코아이트와 네펠린의 유사 이원계의 $^{11}B$ MAS NMR 스펙트럼을 통해 $X_{Ma}$ [$=NaBSiO_4/(NaBSiO_4+NaAlSiO_4)$]가 증가함에 따라 배위수가 4인 붕소($^{[4]}B$)는 증가하는 반면 $^{[3]}B$는 감소하는 것이 관찰되었다. 다성분계 용융체의 $^{27}Al$ MAS NMR 실험 결과, 모든 조성의 용융체에서 배위수가 4인 알루미늄($^{[4]}Al$) 피크가 지배적으로 나타났다. 또한 네펠린 용융체에 붕소가 첨가되었을때 $^{[4]}Al$ 피크의 폭이 크게 감소하였고, 이는 붕소의 첨가가 네펠린 용융체 내의 알루미늄 주위의 구조적 위상학적 무질서도를 감소시킨다는 것을 지시한다. 붕소를 포함한 이원계 및 다성분계 비정질 물질의 $^{11}B$ MAS NMR 스펙트럼으로부터 시뮬레이션을 하여 붕소의 함량에 따른 붕소 원자 환경의 상대적인 존재비를 정량적으로 분석하였고, 이 결과는 붕소가 포함된 비정질 물질의 거시적 성질 변화에 대한 미시적 기작의 근원을 제시할 가능성을 보여준다.