• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.405-408
• /
• 2006

In this study it compares a Japanese standards which is most similar contents with domestic standards related with the light weight aggregate concrete and derives the fundamental data from the results so that it will be able to refer at maintenance of standards or specifications in future. The case of domestic is the actual more insufficient condition which is described in the standards and the specifications than Japanese standards. For the production of he domestic light weight concrete the development of general standards and construction guides and control of water content ratio of the light weight aggregates become accomplished rightly in quality of construction site.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.90-96
• /
• 2003

The purpose of this study is to develop the standards for construction documents. The standards will facilitate efficient exchange and sharing of construction documents among the participants such as owners, designers, constructors and other related parts throughout construction work process. For this reason, this study is intended to define the requirements for establishing XML-based electronic document standardization system, and to prepare the plan for developing XML electronic document in a consistent way.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.243-246
• /
• 2009

Importance of quality control is gradually increasing in the construction. And the reber work is very important things which influence in safety and durability of the building and accounts for about 9.8% of the total cost. Although reber work is important, quality control of the rebar work is still performed by attitude and experience of worker. Therefore, it is very important to quality achievement effort and quality standards recognition of rebar worker for quality sophistication in the construction. Some papers have dealt with the quality control in construction. But there was no study for actual conditions of quality standards recognition of rebar workers. The purpose of this study is to survey the actual conditions of quality standards recognition of rebar workers and to analyze difference of consciousness of administrator and worker. The result are : there id difference of consciousness of worker and administrator, workers work without knowing quality standard.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.19-25
• /
• 2018

At present, there are many companies that can produce modular housing. However, if the housing projects are conducted without design standards and principles, each company will supply housing according to its own design standards, resulting in a loss of opportunity to promote standardization at a national level. Korea's modular construction technology is still in its infancy, and there is a lack of MC design applications due to the limited construction market. In recent years, however, related R&D has been carried out by the Ministry of Land, Infrastructure and Transport in order to activate modular construction. As a result, test-beds for public rental housing are currently being built, and the public rental housing applied with the modular construction method is expected to spread in the near future. In this regard, this study seeks to promote more economical and efficient production and supply of modular housing. To this end, it investigates the current status of modular construction, analyzes the problems and proposes a serious of MC design standards as part of the design standardization and open system for modular housing industry to solve the problems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.343-350
• /
• 2022

The computerization project for underground facilities in Korea began in earnest after the city gas explosion in Seoul in 1994, and the Daegu subway explosion in 1995. As such a large-scale gas explosion accident caused enormous economic loss including human casualties and potential benefits, the need for computerized for efficient management of underground facilities was greatly emphasized in society. Meantime, computerization of underground facilities has been carried out according to the basic plan for building national geographic information system. In this study, problems were identified based on the current status of construction and management of underground facility information, as well as laws and regulations, and directions for establishing quality standards were presented. In addition, construction work standards such as 「Public Survey Work Regulations」, design standards, standard specifications, and technical specifications, gas technology standards, design standards, and communication works so that underground facility information can be linked and utilized in construction work by examining the linkage of the underground facilities, the targets that can be used for quality level information on underground facilities were derived, and a proposal to revise the construction standards was presented. In the future, if the quality standards are established, it is expected that the accuracy and utilization in the construction field will be increased.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.28-33
• /
• 2014

Regarding the characteristics of fatal electric shock accident during the past 10 years, fatalities occurred more frequently in July & August, and AM 10-12 PM & 14-16. Also, the electric shock accident is occurred more frequently in the age group from 30 to 40. Especially, the fatal electric shock accident in construction industry covered more than half of total industry. Therefore, it is strongly requested for the protection technology of an electric shock from the low voltage electric path, grounding method and workers. The aim of this study is to propose the policy about the equipment performance standards and/or worker's safety standards to revise the standards for preventing electric shock accidents on safety workings.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.9-18
• /
• 2011

The occupational safety and health expenses in construction since 1988 has contributed significantly to the reduction of injury occurrence rate. But the appropriation standards for the Occupational Safety and Health Expenses in Construction(OSHEC) have been pointed out so many issues. The purpose of this study is to present ways to improve the appropriation standards for OSHEC through the reviewing of several issues about the current system and analysis of existing statistical data. Based on the result of the research, it is proposed the new model for OSHEC.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.458-461
• /
• 2006

With the opening in construction market, more diversified and internationalized construction culture is imported, but the level of our construction culture and policy is still not met the international standards. For example, there is a difference in the liquidated damages at delay due to the reason of builder imputation during the public construction project comparing the international standards like damages. It may lead to the potential claim. In this study, via comparing and analysis on the relevant international standards and extension expense for terms of work, actual compensation is selected, and improvement of liquidated damages like damages is presented.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.481-485
• /
• 2015

Indonesian construction companies are currently facing high competition both among themselves and with global construction companies. In order to address this issue, the Government of Indonesia has enacted specific regulations and policies relating to the development and implementation of quality management systems (QMSs) ISO 9001 based in construction, acknowledging that the consistency of construction project quality requires a formal quality system as a guarantee to raise quality standards at all project stages. The research has been undertaken to examine the effectiveness of the regulations and policies against several key performance indicators (KPIs) of the ISO 9001 Indonesian construction companies. A comprehensive review of the relevant regulations and policies together with interviews with the Government and National Construction Services Development Board recommend possible additional guidelines and supporting quality system, which intends to measure contractors' project output against defined standards as well as to assess their performance among other similar service providers. The outcomes of the research contribute to the development of the Indonesian own construction industry quality measurement and assessment system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.251-252
• /
• 2021

With the recent emergence of the 4th Industrial Revolution, the government is promoting the development of smart construction technology and institutional improvement through various policies to induce cutting-edge and technological innovation in the construction industry. As part of such smart construction technology, the application of BIM is being activated, and related regulations and guidelines are constantly being supplemented. In relation to BIM, there are many studies on the fields of library, design standards etc., but research on specific unit price utilization and unit price DB construction for calculating construction cost is insufficient. Therefore, in this study, a basic study was conducted on the linkage of the construction standard market unit price and the BIM library. Based on the basic research conducted in the future, we intend to establish specific standards for calculating BIM-based construction costs.