• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.656-660
• /
• 2008

This study is carried out to minimize the damage to the forest road when locating strip roads in the future for stability of timberland after afforestation by assessing the factors that affect the damage on the forest road surface and making appropriate constructing standards. Major factors that influence damage to the strip road surface were location, longitudinal gradients, soil types, cross-section shape in order of influence on damage. it is considered that structural road factors like longitudinal gradients, road width, location factors such as construction location, slope gradients and road material like soil types were greatly related to occurrence of road surface damage. Damage occurrences in the forest road were severe at the valley, longitudinal gradients of over 24%, weathered granite soil, concave of road position, road width of over 3.0 m. stability was high at longitudinal gradients of 4~24%, road width of under 3.0 m, ridge of road position, straight slope, soil materials. The evaluation table of damage possibility on forest road was manufactured by discriminant analysis using Quantification theory(II). The results showed that the discriminant ratios was 79.4% and this table was available for forest manager.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.9-21
• /
• 2015

This study examined pollution level of sediment in Sookchun lake, and studied dredging validity by examining phosphorous release characteristics on surface polluted soil. Total phosphorous, the principal cause of algal blooms, exceeded dredging assessment standards regarding Daechung lake (1.5 mg/g) at all points. Also at all points, total nitrogen exceeded the dredging assessment standard regarding Paldang Lake (1.1 mg/g), but fell short of the standard regarding Daechung lake (3.0 mg/g). Dredging zone was suggested in this study is Chuso water body (WS-6~WS-12) in Sookchun lake. In relation to sediment pollution levels measured at different depths, LOI tended to decrease as it became deeper. The concentrations of T-N varied depending upon the depth as well as points, but no regular pattern was observed. The depth and site did not significantly influence T-P. From the results of phosphorous release tests, it was shown that total phosphorous release flux was calculated to be $7.2{\sim}15.4mg/m^2/d$ for anaerobic condition, $0.5{\sim}2.0mg/m^2/d$ for aerobic condition and $2.0{\sim}4.1mg/m^2/d$ for facultative condition. Release flux and T-P concentration of surface sediments had positive correlation ($R^2$ 0.7871). And The corelation between release flux and DO condition in reactor had strong negative correlation ($R^2$ 0.8824).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.94-104
• /
• 2014

This contribution studied knowledges, informations and main project issues for systematic conservation management utilize of Joseon Royal Tombs guaranteeing their Outstanding Universal Value, Authenticity and Integrity, and the outcomes are as follows. The first, regarding the tomb's system, it should be planned to enhance authenticity and integrity of Joseon Royal Tombs through historical facts, measurement, diagnosis and intervention according to international and national charters, statements and general standards. The second, regarding prevention against disasters, the anti-fire system including construction of GIS materials and the Risk Map following investigation the present condition, premising improvement of relevant laws and regulations, should be planned. The third, we should consider, regarding utilize, educational application by the each tomb's story and royal ancestral rite, tourism by the local area of each tomb and industrial application by science and IT technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.518-527
• /
• 2020

The establishment of a green remodeling strategy is focused on technology, so the necessity of establishing a customized strategy considering the field situation has emerged. This paper examined the technology strategy through sensitivity analysis as a methodology for guiding strategy. For a 90-square-meter detached house, nine models of the construction standards of pre-1980s, 1984, and 2010 in Seoul, Daejeon, and Busan were assessed using the optimization method that combines the energy plus engine and the ModeFrontier. Sensitivity analysis was performed, and the remodeling strategy priority was derived. For pre-1980 models, the strategy for enhancing the roof insulation performance had a significant priority. The SHGC values of the windows were found to have the next highest priority regardless of the region and the time of completion, showing that the performance standard, including the SHGC, needs to be expanded. The possibility of remodeling while maintaining the existing geometry was confirmed because the adjustment of the window wall ratio accompanying large-scale demolition works has low priority. The priorities of technology strategies in each case showed very different patterns, suggesting the possibility of establishing a remodeling strategy by a comprehensive evaluation along with economics and constructability analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.246-259
• /
• 2008

This study was to minimize the trial and error in the primary step of the C4I system(ATCIS) of the each army corps on the front line, and test the economy and efficiency was tested by reviewing related papers and the system characteristics of other countries. The relationship was researched by analyzing the collected survey data and survey data related to the user's requirement level such as the army standards, that is, commonality, timeliness, simplification, automaticity, field availability and viability, multi-stage security and interoperability, unification. The result showed that the C4I system was efficiently operated through the system reliability for the specification of the system and operation manual, maneuverability and security, adaptability of the war field and system support and management, and good education and training about system operation, and less system maintenance and supplementary element. As a result, the development plan confirmed that the continuous operator education and the construction of the maintenance, and the upgrade digitalization(C4ISR+D) with the korean characteristics based on IT of network systems, and system development of the measurement model of the operator performance must be continuously supplemented in the near future.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.37-43
• /
• 2017

The combustion characteristics of four kinds of wood specimens, such as Japan cedar, spruce, lauan, and red pine, were tested using the standards of Cone calorimeter (ISO 5660-1, 2) and smoke density tester (ASTM E 662). Japan cedar caught fire the quickest but the mean heat release rate was the lowest, $58.52kW/m^2$. The mean heat release rate of red pine appeared to be the highest, $71.75kW/m^2$. The lauan and Japan cedar generated relatively large amounts of carbon monoxide while the red pine and the spruce generated relatively large amounts of carbon dioxide. The red pine generated large amounts of smoke and the spruce generated the least amounts of smoke than the other samples. The total smoke release rate in the dynamic method was the highest in red pine and the lowest in spruce. The smoke density of red pine in the static method was highest in the non-flaming and flaming methods. In the non-flaming method, the smoke density of lauan was the second highest, whereas the flaming method was the least. In terms of the heat release rate, the fire risk from red pine was highest among the four test specimens. From the viewpoint of smoke generation, red pine was the most dangerous material in both dynamic and static methods.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.75-85
• /
• 2018

The Grenpell tower fire in England in June of 2016 is a representative example of damage caused by a vertical fire spreading through external insulation. Organic insulation materials, which are widely used in external insulation, have the disadvantage that they have good insulation performance but are vulnerable to fire. Aluminum composite panels are used as exterior wall finishing materials, and plastics used in aluminum are regarded as the cause of vertical fire spread. Due to the steel frame used to secure the aluminum composite panel to the outer wall, a cavity is formed between the outer wall and outer wall finish. When a fire occurs on the outer wall, the flammable outer wall as well as the flame generated from the heat-insulating material spreads vertically through the cavity, resulting in damage to people and property. In Korea, material unit performance tests are carried out by the Ministry of Land, Infrastructure and Transport notice 2015 - 744. However, in the UK, the BS 8414 test is used to measure the vertical fire spreading time on the outer wall in real scale fire tests. In this study, the risk of external wall fire was evaluated in an actual fire by conducting a real scale wall fire test (BS 8414), which was carried out in Europe, using aluminum composite panels of semi-noncombustible materials suitable for current domestic standards. The purpose of this study was to confirm the limitations of material unit evaluation of finishing materials and to confirm the necessity of introducing a system to prevent the spread of outer wall fire through an actual scale fire test.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.115-141
• /
• 2011

In urban space, public space is publicly or privately owned space freely accessible by the public. Privately owned public space to the public hosts small-scale rest facilities to serve the public in buildings of certain purposes and sizes for the sake of pleasant urban environment. The Building Act and building ordinances formulate a set of criteria for management and easement of construction standards as well as the area. When creating privately owned public space, one can get incentives through the easement of floor space index and height limit. The purposes of this study were to investigate and analyze privately owned public open space, which is freely accessible by the public, and its adjacent streets and to propose plans to improve the regulations for securing privately owned public space for more rational and practical legal applications. The study then proposed some plans to help to increase the quality of privately owned public space including applying the coefficient to suggest the type of privately owned public space fit for the features of the streets and measure the appropriate utility level differently and distinguishing the mandatory items according to the facility regulations in privately owned public space from the ones qualified for additional points in case of installation. The types of privately owned public open space should be applied differently and the content of facilities intended should be different according to whether it will serve as a resting place or grant more importance on traffic by walking, depending on the features of its adjacent streets. The privately owned public space, the frontage space of building, and the adjacent sidewalks should become a whole and be regarded as one space from the integrated perspective. The results of the study claim further significance in that it investigated privately owned open space and roadside across Seoul. They will serve as useful data to solve the problems with the privately owned public space of the city, which destroys spatial continuity by focusing on the quantitative increase of privately owned open space and creating individual privately owned open spaces and builds high-rise buildings alienated from the existing spaces, and to increase the quality of future privately owned public space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.129-137
• /
• 2016

BIM libraries for architectural projects have been developed and distributed. However, they do not define physical and logical quality control methods for individual library objects, so there are some difficulties in securing reliability of 3D library models converted from 2D drawings. Because the BIM library contents can be built by participating material and member-fabrication companies, after making individual BIM library objects, a certification process through separate quality verification is very important when delivering as-built BIM libraries. Since the BIM library should have generality for usage, it is necessary to secure the quality of BIM library objects according to consistent verification standards. Therefore, this study suggests a quality verification method for certifying a BIM library object from physical and data perspectives by comparing existing 2D drawings in the BIM libraries built based on standardized 2D drawings from MOLIT. This method could be widely used for quality verification in delivering BIM libraries by companies in the construction sector and operated with rule set data for quality verification of as-built BIM models.