• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.433-441
• /
• 2012

Accompanied by Chinese strong economic growth rates and development of demand for the construction industry, Chinese construction industry has already become one of the largest construction markets in the world. Unfortunately, the frequent occurrence of safety incidents on Chinese construction sites is a large obstacle for other countries construction companies seeking to enter the Chinese construction market. This study aims to analyze and compare the safety awareness of Chinese and Korean construction workers. Our research showed that the safety awareness of Korean construction workers is far higher than that of their Chinese counterparts, particularly in terms of the efficiency of safety education and the observance of safety rules. The development of a safety management plan based on these results will contribute to reducing the frequency of accidents on Chinese construction sites.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.103-110
• /
• 2022

In the era of the 4th Industrial Revolution, smart technology being considered to improve productivity breakthroughs is in the spotlight as a means to replace traditional construction technology in the construction industry. However, various problems are occurring in construction sites using smart technology and causing negative impacts on construction projects. Therefore, the objective of this study is to identify risk factors that occur when smart technologies are used in construction projects. To achieve this purpose, this study investigated the difficulties at construction projects using smart technology, and risk factors were derived based on site surveys and literature. The risk factors were measured by experts, and then a total of 19 risk factors was derived by exploratory factor analysis. As a result, risks were classified as 5 factors, the institutional factor is the most difficult response, and the government needs anticipative system improvement and a long-term plan. The research findings provide practical implications for construction experts trying to apply smart technology in construction sites and construction policy-makers to revitalize smart technology.

• Journal of Environmental Health Sciences
• /
• v.41 no.3
• /
• pp.163-170
• /
• 2015

Objectives: This study evaluated the effect of construction on ambient PM-10 in the surrounding area. Methods: Four study sites were selected from total AAQMN 11 points in Daegu city. All the four study sites were located near under or completed construction. Mean monthly PM-10 in 2007 to 2013 were analyzed. Results: Impact of residential construction on PM-10 was more obvious than industrial area. PM-10 was positively associated with number of construction near the study site. When there were 2 or 3 construction sites, PM-10 level was higher. Wind direction and the surrounding terrain affected PM-10. Conclusions: Construction has a strong influence on PM-10 in the surrounding Area. Reduce PM-10 there is the need for special construction site management. Proper management is required to minimize fugitive dust in construction sites.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.155-162
• /
• 1999

Small and medium-sized construction sites are most serious in Occupational Safety and Health in the construction industry. The safety consulting engineering has been launched, in 1995, to improve the safety environments and prevent serious injuries and fatalities accidents. The purpose of this study is to analyze the effect of the safety consulting engineering for small and medium-sized construction sites. This study conducts a number of interviews with experienced contractors, consulting engineers, etc. And the questionnaire survey was peformed with 111 respondents. This paper presents several improvements to increase the efficiency of the safety consulting system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.225-226
• /
• 2022

In order to secure the practicality of services using drones, improve on-site operability, and improve the convenience of aircraft maintenance, it is necessary to develop a drone station that can be safely stored while ensuring charging performance. Therefore, a total seven points of improvement were derived through laboratory experiments after the development of the first prototype, and an improved second prototype will be developed in the future based on the preceding processes.

• Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.25-26
• /
• 2005

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.65-73
• /
• 2007

This paper presents the safety performance of Korean domestic construction companies including the characteristic and current status of safety management actions of the firms. Safety performance both at the head office and job sites of each construction companies, which are divided four groups by construction capacity ranking, are investigated. General recognition that there is a wide difference of safety performance among domestic construction companies by construction capacity ranking was confirmed by comparing the safety performance at the head office and the job sites of the companies under the study. Data analysis shows that the safety performance of the group I and II has the largest difference, and this difference of the group II and III and group III and IV are gradually decreased, respectively. This paper presents the safety performance improvement measures, which is applicable to safety management components consisting of both the head office and job sites safety management systems of each group (e.g., I, II, III and IV) suffering the lack of safety performance.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.441-449
• /
• 2015

Recently, the number of accidents reported involving foreign laborers has risen, and the need to prevent accidents at construction sites has become more urgent. It has been found that 90 percent of construction accidents are caused by unsafe work practices, and various studies have been conducted on these practices with the aim of preventing accidents at construction sites. However, the tendency with previous studies was to average the results of survey responses, and as a result it is impossible to consider the potential risk of how many foreign laborers feel unsafe in relation with the unsafe practices. Therefore, in this study, importance-performance analysis (IPA) was improved in order to assess the potential risk of the unsafe practices of foreign laborers at construction sites in Korea. To verify the applicability of the improved IPA, a survey was carried out, and then the results were compared with those of the IPA. Through the use of the improved IPA, unsafe practices that were not found in the previous IPA but have potential risk were identified. The method proposed in this study is expected to contribute to the prevention of construction accidents of foreign workers by enabling a more efficient management.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.27-38
• /
• 2019

Sensors collect information for Internet of Things (IoT)-based services. However, indoor construction sites have a poor communication environment and many interfering elements that make it difficult to collect sensor information. In this study, a network was constructed between a Bluetooth Low Energy (BLE)-based IoT device based on a serverless IoT framework and a router. This experimental environment was applied to large- and small-scale indoor construction sites. Experiments were performed to test the communication performance of BLE-based IoT devices and routers at indoor construction sites. An analysis of the received signal strength indication (RSSI) graph patterns collected from the communication between the BLE-based IoT devices and routers for different testbed site situation revealed areas with good communication performance and poor communication performance due to interfering factors. The results confirmed that structural components of the building as well as the materials, equipment, and temporary facilities used in indoor construction interfere with the communication performance. Construction project managers will require improved technical knowledge of IoT, such as optimizing the router placement and matching communication between the router and workers, to improve the communication performance for large-scale indoor construction.

• Journal of Environmental Impact Assessment
• /
• v.22 no.4
• /
• pp.361-367
• /
• 2013

Noise and vibration occurs during construction intermittently, but with the most arise complaints. There is a need to efficiently manage the construction noise and vibration problems because in case a residential facility that requires calmness around the construction site adversely affects the living conditions of nearby residents. The ministry of environment has mandating the installation of soundproofing facilities for the management of construction noise. In order to enforce a particular construction, the mandatory install with soundproofing facilities before the start of construction, and after construction. However, Installation guide of soundproofing facilities for construction sites were not considered affected areas by noise and there is no provision of performance evaluation for soundproofing facilities. In this study, investigated the status and problems of the installation guide for soundproofing facilities in construction sites, we propose an efficient installation guide of soundproofing facilities for the reduction construction noise.