• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.137-144
• /
• 2022

As one of the most important vertical transportation equipment in super high-rise buildings, the construction elevator directly affects the project period, cost, and effectiveness. The paper proposes a new construction elevator with single-guide rail and multi-cages. It can solve the problems of single construction elevator capacity shortage and efficacy decrease with height reduction, the occupancy of plan and elevation position of multiple construction elevators, and extension of total construction period by cycling operation of multi-cages on a single-guide rail. The paper focuses on the design and research of the main components of the equipment, such as the rotating guide rail mechanism, vertical bearing mast tie system, segmented electrical power supply system, group control scheduling system, and safety anti-collision system.

• 한국컴퓨터정보학회논문지
• /
• 제22권2호
• /
• pp.37-44
• /
• 2017

Wireless sensor networks are composed of many wireless sensor nodes that are sensing the environments. These networks have many constraints that are resource constraints, wireless communication, self-construction, etc. But they have many applications that are monitoring environment, tracking the object, etc. In this paper, a mechanism of finding QoS Satisfied multi-path is proposed in wireless sensor networks. In order to satisfy the QoS requirement, the proposed mechanism extends the AODV protocol to find multiple paths from a source node to a destination node by using the additional AODV message types that are proposed. This mechanism will be used to support many QoS applications such as minimum delay time, the better reliability and the better throughput by using the QoS satisfied multi-path. Overheads of the proposed mechanism are evaluated using simulation, and it is showed that QoS satisfied multiple paths are found with a little more overhead than the AODV mechanism.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.158-166
• /
• 1998

This paper presents a geometrical approach to the characteristic analysis of parallel mechanism with free joints intended for use as a planar task robot. Solution of the forward and inverse kinematic problems are described. Because the mechanism has only three degree-of-freedom output, constraint equations must be generated to describe the inter-relationship between actuated joints and free joints so as to describe the position and orientation of the moving platform. Once these constraints are incorporated into the kinematics model, a constrained Jacobian matrix is obtained. and it is used for the solution of the forward kinematic equations by Newton-Raphson technique. Another Jacobian matrix was derived to describe the interrelationship between actuated joints and moving platform. The stiffness, velocity transmission ratio, force transmission ratio and dexterity of the mechanism are then determined based on this another Jacobian matrix. The geometrical construction of the mechanism for the best performance was investigated using the characteristic analysis.

• 한국건설관리학회논문집
• /
• 제11권2호
• /
• pp.147-155
• /
• 2010

Traditional procurement methods have revealed many disadvantages especially the adversarial relationship between parties. After several decades of application, partnering has shown that it is an innovative arrangement that help to reduce many problems having existed in traditional arrangement. It can provide a win-win working attitude in a construction project. Partnering in construction has been applied in several ways in recent years in Vietnam. This mechanism can help both local and foreign construction participants to mutually offset their differences when implementing projects. This paper has investigated and introduced the incentives of partnering from Vietnam perspective in terms of foreign and local participants perceptions. It has been shown that 'to learn mutually among participants' and 'to increase bidding advantages' are the most important incentives according to foreign and local practitioners respectively.

• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.301-308
• /
• 2018

Properties of AFS vary with the changes in the face-sheet materials. Hence, the performance of AFS can be optimized by selecting face-sheet materials. In this work, three types of face-sheet materials representing elastic-perfectly plastic, elastic-plastic strain hardening and purely elastic materials were employed to study their effects on the flexural behavior and failure mechanism of AFS systematically. Result showed face-sheet materials affected the failure mechanism and energy absorption ability of AFS significantly. When the foam cores were sandwiched by aluminum alloy 6061, the AFS failed by face-sheet yielding and crack without collapse of the foam core, there was no clear plastic platform in the Load-Displacement curve. When the foam cores were sandwiched by stainless steel 304 and carbon fiber fabric, there were no face-sheet crack and the sandwich structure failed by core shear and collapse, plastic platform appeared. Energy absorption abilities of steel and carbon fiber reinforced AFS were much higher than aluminum alloy reinforced one. Carbon fiber was suggested as the best choice for AFS for its light weight and high performance. The versus strength ratio of face sheet to core was suggested to be a significant value for AFS structure design which may determine the failure mechanism of a certain AFS structure.

• 한국통신학회논문지
• /
• 제32권12B호
• /
• pp.728-734
• /
• 2007

본 논문에서는 최소 구축비용의 물리적 다중 보안 등급 네트워크 설계를 위한 GOSST 휴리스틱 메커니즘을 제안한다. 다중 보안 등급 네트워크상에서 각 노드는 원하는 보안 등급으로 다른 노드와 통신할 수 있다. 이를 위해서는 불법적인 물리적 접근을 통제할 수 있는 방법이 필요하다. 이러한 네트워크를 최소비용으로 구축하기 위해 GOSST 문제를 적용한다. 이 문제는 NP-Hard 영역이므로 현실적인 해를 얻기 위해서는 적절한 복잡도의 휴리스틱이 필요하다. 본 연구에서는 최소 구축비용의 물리적 다중 보안 등급 네트워크의 설계를 위해, 우리의 이전 거리 직접 GOSST 휴리스틱을 변형한 GOSST 휴리스틱 메커니즘을 제안한다. 이것은 실험 비교 대상인 G-MST에 대하여 평균 29.5%의 구축비용 절감을 보였다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2001년도 제39회 학술발표회논문집
• /
• pp.101-132
• /
• 2001

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.97-106
• /
• 2004

토피고가 낮아 지반의 자립성이 적은 토사층, 풍화암층에서 시공되는 터널 구조물의 경우, 시공중 붕락을 방지하고 단기적인 안정성을 확보하기 위해서 보조공법들이 사용되는데 특히, 터널의 보강과 차수효과를 동시에 얻을 수 있는 강관 다단 그라우팅 공법(Umbrella Arch Method)이 많이 적용되고 있다. 그러나, 국내에서는 아직 본 공법의 적용에 있어 외국자료나 경험적 방법에 의한 설계 및 시공이 이루어지고 있는 실정임을 감안할 때, 합리적이고 이론적인 설계 및 해석기법의 도입이 필요하다. 본 논문에서는 강관 다단 그라우팅 공법을 적용한 NATM 현장에서 계측을 통해 터널 굴착에 따른 강관의 거동을 분석하고, UAM 설계시에 적용할 수 있는 하중계를 제안하였다. 그리고, 제안된 하중계를 바탕으로 실제 현장에서 적용할 수 있는 UAM의 설계지침 즉, 강관길이$(L_e , L_b)$, 중첩시공거리(x), 횡방향 설치간격 등을 결정할 수 있는 설계법을 제안하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권10호
• /
• pp.3438-3457
• /
• 2022

As location-based services (LBS) are widely used in vehicular ad-hoc networks (VANETs), location privacy has become an utmost concern. Spatial cloaking is a popular location privacy protection approach, which uses a cloaking area containing k-1 collaborative vehicles (CVs) to replace the real location of the requested vehicle (RV). However, all CVs are assumed as honest in k-anonymity, and thus giving opportunities for dishonest CVs to submit false location information during the cloaking area construction. Attackers could exploit dishonest CVs' false location information to speculate the real location of RV. To suppress this threat, an edge-assisted Trusted Collaborative Anonymity construction scheme called TCA is proposed with trust mechanism. From the design idea of trusted observations within variable radius r, the trust value is not only utilized to select honest CVs to construct a cloaking area by restricting r's search range but also used to verify false location information from dishonest CVs. In order to obtain the variable radius r of searching CVs, a multiple linear regression model is established based on the privacy level and service quality of RV. By using the above approaches, the trust relationship among vehicles can be predicted, and the most suitable CVs can be selected according to RV's preference, so as to construct the trusted cloaking area. Moreover, to deal with the massive trust value calculation brought by large quantities of LBS requests, edge computing is employed during the trust evaluation. The performance analysis indicates that the malicious response of TCA is only 22% of the collaborative anonymity construction scheme without trust mechanism, and the location privacy leakage is about 32% of the traditional Enhanced Location Privacy Preserving (ELPP) scheme.

• 한국정보과학회논문지:정보통신
• /
• 제28권4호
• /
• pp.611-620
• /
• 2001

최선의 전송(Best Effort) 서비스를 제공하는 현재의 IP 멀티캐스트 서비스의 특성상 신뢰전송을 요구하는 각종 응용들의 요구를 만족시키기 위해서는 추가적인 신뢰전송 프로토콜이 필요하다. 이러한 요구에 따라 신뢰적인 멀티캐스트 전송 프로토콜에 대한 연구가 수행되고 있는 가운데, 계층적 트리를 구축하여 신뢰성을 보장하는 노력이 활발하게 진행되고 있다. 계층적 트리 기반의 방식은 높은 확장성을 보장하면서 효율적으로 신뢰성을 보장하지만 전송단계에서 효율적인 논리 트리 구축 방안이 제공되어야 한다. 논리적인 제어 트리 구축은 수신자 기반의 상향식 (bottom-up) 방식이 주로 사용되어 왔으나 이 방법은 병렬적 트리 구성을 통하여 신속한 트리 구축을 할 수 있다는 장점이 있지만 제어 트리 상에 루프 (loop)가 발생할 수 있다는 단점과 메시지 부하가 커지는 단점이 있다. 이에 본 논문은 하향식(top-down) 기반의 제어 트리 구축 방안을 제안한다. 하향식 방식은 단계적인 트리 구축을 통하여 루프 발생을 방지 할 수 있다. 또한 성능평가를 통하여 메시지 부하를 줄일 수 있다는 것을 보였다. 본 논문은 응용의 요구 사항에 맞추어 상향식과 하향식을 선택적으로 사용할 것을 제안한다.