• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.47-56
• /
• 2010

The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.223-230
• /
• 2003

KCTA(Korea Container Terminal Authority) is going to introduce automated operating system in the port of Gwangyang container terminal to enhance the efficiency. Prior to developing the container terminal, defining the objective of container terminal operation is essential. This research used AHP technique to define the operation objective of automated container terminal objectively, and the questionnaire to collect the opinions of future customer, operator and research institution. The objectives mix of the automated container terminal are composed of the minimization of initial investments, the minimization of operational expenses, the performance of automation system, the raising of operation efficiency and productivity and the improvement of customer service. The result of the analysis revealed that most important factor among objectives mix was “the minimization of operation expense”. Especially, the user group preferred to select the factor of “the improvement of customer service”as objective rather than select other objectives. The result of this research will suggest some guidelines for deciding the level of investment of terminal construction. information system, automation equipment, terminal worker and etc., which are to be considered in terminal development and the system development hereafter.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.325-333
• /
• 2018

Purpose: There have been terrorist attacks all over the world, causing massive damage. In Korea, there are few cases of terrorist damage, but the lack of the on-site response experience lead to constraints on the opportunity to verify capabilities against terrorism. Therefore, in this study, the chemical terrorism on-site countermeasures is considered as a concept of service, it was possible to draw up improvement alternatives for each element by reviewing at once the interactions between the concerned organizations and citizens in the field and the utilization of the equipment and facilities in the invisible area. Results: It had been evaluated the service process of the counterpart manager from the viewpoint of the victim citizen, who is the beneficiary of the final security service. It has found out the waiting point(W.P) between the victim's civilian incident management, and the element of failure(F.P). Conclusion: In this way, comparing chemical terror incident response manuals belonged to each related organization by fusion of service design approach and scenario technique, It is expected that it will be able to find out more specific problems and to find improvement alternatives.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.69-77
• /
• 2004

Since there are a lot of changes in climate on domestic and natural disasters owing to the disturbance-development of the land, damages of properties and human life frequently occur due to the coastal floodings. Accordingly, it is necessary to find the area where the danger of flooding coasts is relatively high and to inform resident the characteristics of the area As a part of preventive land management to minimize the flooding damages of the coastal area, this study suggested the generation of the coastal flood hazard map that provides detailed information such as refuge path, a place of refuge, and the location of medical supplies, food, and main rescue equipment, etc. This study selected the southern region of Daebu-do as an exemplary area, conducted a document study to establish GIS data, secured pre-structured data, and suggested the method of establishing GIS data fit to the study area. In particular, it emphasized the efficient construction of the geographical spatial data that were accurate, economic, objective, and realistic in supporting the modeling to predict the flooding zone. The specific type of established database was divided into flooding risk area, flooding warning area, and flooding-volume area. The prototype of coastal flood hazard map can be widely used for efficient disaster management. Furthermore, it is considered that the map could be applied for arousing residents' attentions to the flooding, prior education, and local governments' management actions against the danger of flooding.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.145-154
• /
• 2017

In recent years, demand for 1 / 1,000 digital map production has increased in various fields such as construction and urban planning. As a result, the use of low-cost non-metric cameras that replace expensive aerial photogrammetry equipment is required. In Korea, researches are being continuously carried out to produce a large scale digital map by photographing a small target area with a non-metric camera. However, due to the limitation of the accuracy of the non-metric camera, it is difficult to do digital mapping with stereoscopic photographs. In this study, we tried to verify the possibility of large-scale digital mapping to utilize non-metric camera for public survey. For this purpose, the accuracy of the digital mapping results of the non-metric camera and the results of the DMC camera were compared and analyzed. After performing in-situ self-calibration including 8 standard additional parameters, we plotted to a scale of 1/1,000 and confirmed that the RMSE is suitable for public survey accuracy of ${\pm}0.145m$ in horizontal and ${\pm}0.153$ m in vertical.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2016

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.127-136
• /
• 2017

U-City laws are divided into three categories: intellectual laws, information superhighway laws, and integrated operation center laws. Previous studies have suggested that efficient infrastructure operation and management is necessary in Ubiquitous-City (U-City). However, infrastructure is often interpreted differently by different laws. The purpose of this study was to plan for the integrated operation of intelligent service facilities by comprehensively analyzing the law system of domestic intelligent service facilities and problems in operation and management based on this critical mind. For this, present conditions and problems of intelligent service facilities were found through interviews with people who are in charge of the law system and other practitioners. The necessity of integrated use, including city information generated from intelligent service facilities and installment locations, has been demonstrated. Government ministries and local governments have established various information systems using ICT and U-City laws that specify integrated management and operation, but do not clearly specify definitions for the specific responsibility and authority for main agents participating in facility operation. A system is needed to smoothly mediate the relevant divisions so that they can use installed equipment simultaneously for efficient operation in generating city information. This objective of this study was to prepare a unitary law system for efficient installment and management of intelligent service facilities by establishing a logically linked relationship among the relevant laws and regulations. This will provide a foundation for a management system that has an integrated linkage of intelligent service facilities.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.49-72
• /
• 2018

Before the financial crisis of 1997 in Korea, many industrial sectors across the country have achieved remarkable economic growth since the 1970s because of the development of large-scale equipment industries such as civil engineering, steel, construction and chemical industries. However, after the financial crisis, the economic growth rate has slowed down. Also, the global recession and the rise of China in the global business environment have led to a long-term recession in the national industry as a whole. In current economic environment, it is not easy for the companies even having excellent resources to continue its competitive advantage. Moreover, the chemical industry, which has an influence as a basic industry of other industries, misses the point of transformation into a high value-added industry, as shown in previous research. In order to meet the rapidly changing global business environment, Korean chemical companies should have a dynamic capabilities which to rapidly reallocate and consolidate the resources and capabilities they possess. The dynamic capabilities to convert, rearrange and develop the resources possessed by the company in the direction of creating high added value and to promptly search for, absorb, transform and fuse newly required capabilities and resources should be continuously applied to Korean chemical companies. It is the core competence to secure competitive advantage. In order to secure the dynamic capabilities of the company, the dynamic capabilities of individual employees should be strengthened and employees should be able to demonstrate their own leadership so that they can proactively work and self-manage in a positive direction. Previous studies have focused mainly on the dynamic capabilities of firms. However, the competence of the human resources that make up the enterprise leads to the capabilities of the enterprise, and the human resources themselves are also important corporate resources. This paper focuses on the dynamic capabilities of individuals and strives to clarify the causal relationship between dynamic capabilities, self-leadership, and organizational effectiveness which have direct or indirect effects on management outcome. The reasons for choosing the chemical industry are based on the fact that a domestic chemical companies are in a long-term recession, and they lacks a innovation and value creation capabilities. Also, chemical industry has a large impact on the national economy.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.172-177
• /
• 2021

As part of the digital era, a digital twin that simulates the weak part of a product by performing a stress test that reduces the lifespan of some expensive equipment that cannot be done in reality by accurately moving the real world to virtual reality is being actively used in the manufacturing industry. Due to the development of IoT, the digital twin, which accurately collects data collected from the real world and makes it the same in the virtual space, is mutually beneficial through accurate prediction of urban life problems such as traffic, disaster, housing, quarantine, energy, environment, and aging. Based on its action, it is positioned as a necessary tool for smart city construction. Although digital twin is widely applied to the manufacturing field, this study proposes a smart city model suitable for the 4th industrial revolution era by using it to smart cities and increasing citizens' safety, welfare, and convenience through the proposed model. In addition, when a digital twin is applied to a smart city, it is expected that more accurate prediction and analysis will be possible by real-time synchronization between the real and virtual by maintaining realism and immediacy through real-time interaction.