• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3176-3183
• /
• 2010

A multi-scale fatigue life prediction methodology of composite pressure vessels subjected to multi-axial loading has been proposed in this paper. The multi-scale approach starts from the constituents, fiber, matrix and interface, leading to predict behavior of ply, laminates and eventually the composite structures. The multi-scale fatigue life prediction methodology is composed of two steps: macro stress analysis and micro mechanics of failure based on fatigue analysis. In the macro stress analysis, multi-axial fatigue loading acting at laminate is determined from finite element analysis of composite pressure vessel, and ply stresses are computed using a classical laminate theory. The micro stresses are calculated in each constituent from ply stresses using a micromechanical model. Three methods are employed in predicting fatigue life of each constituent, i.e. a maximum stress method for fiber, an equivalent stress method for multi-axially loaded matrix, and a critical plane method for the interface. A modified Goodman diagram is used to take into account the generic mean stresses. Damages from each loading cycle are accumulated using Miner's rule. Monte Carlo simulation has been performed to predict the overall fatigue life of a composite pressure vessel considering statistical distribution of material properties of each constituent, fiber volume fraction and manufacturing winding angle.

• Ocean and Polar Research
• /
• v.33 no.3
• /
• pp.309-319
• /
• 2011

This is a preliminary study of the feasibility of obtaining reliable tidal current harmonic constants, using one month of current observations, to verify the accuracy of a tidal model. An inference method is commonly used to separate out the tidal harmonic constituents when the available data spans less than a synodic period. In contrast to tidal constituents, studies of the separation of tidal-current harmonics are rare, basically due to a dearth of the long-term observation data needed for such experiments. We conducted concurrent and monthly harmonic analyses for tidal current velocities and heights, using 2 years (2006 and 2007) of current and sea-level records obtained from the Tidal Current Signal Station located in the narrow waterway in front of Incheon Lock, Korea. Firstly, the l-year harmonic analyses showed that, with the exception of $M_2$ and $S_2$ semidiurnal constituents, the major constituents were different for the tidal currents and heights. $K_1$, for instance, was found to be the 4th major tidal constituent but not an important tidal current constituent. Secondly, we examined monthly variation in the amplitudes and phase-lags of the $S_2$ and $K_1$ current-velocity and tide constituents over a 23-month period. The resultant patterns of variation in the amplitudes and phase-lags of the $S_2$ tidal currents and tides were similar, exhibiting a sine curve form with a 6-month period. Similarly, variation in the $K_1$ tidal constant and tidal current-velocity phase lags showed a sine curve pattern with a 6-month period. However, that of the $K_1$ tidal current-velocity amplitude showed a somewhat irregular sine curve pattern. Lastly, we investigated and tested the inference methods available for separating the $K_2$ and $S_2$ current-velocity constituents via monthly harmonic analysis. We compared the effects of reduction in monthly variability in tidal harmonic constants of the $S_2$ current-velocity constituent using three different inference methods and that of Schureman (1976). Specifically, to separate out the two constituents ($S_2$ and $K_2$), we used three different inference parameter (i.e. amplitude ratio and phase-lag diggerence) values derived from the 1-year harmonic analyses of current-velocities and tidal heights at (near) the short-term observation station and from tidal potential (TP), together with Schureman's (1976) inference (SI). Results from these four different methods reveal that TP and SI are satisfactorily applicable where results of long-term harmonic analysis are not available. We also discussed how to further reduce the monthly variability in $S_2$ tidal current-velocity constants.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.323-328
• /
• 2004

These studies were carried out to investigate the fumigation and contact toxicities of spearmint oil (Mentha spicata) against adults of greenhouse whitefly, Trialeurodes vaporariorum and sweet-potato whitefly, Bemisia tabaci. And we carried out the constituent analysis of spearmint oil using gas chromatograph (GC) and gas chromatograph mass spectrometry (GC/MS). Spearmint oil showed $99.1\%,\;91.7\%,\;41.1\%$ fumigation toxicity against T. vaporariorum adults at $10{\mu}L/954mL,\;5{\mu}L/954mL,\;1{\mu}L/954mL$ air concentration, respectively. In case of B. tabaci adults, spearmint oil showed $100\%,\;100\%,\;61.3\%$ fumigation toxicity, respectively. However, spearmint oil showed < $30\%$ contact toxicity against adults of T. vaporariorum and B. tabaci. Through the constituent analysis using GC and GC/MS, we confirmed main constituents of spearmint oil were limonene ($16.1\%$), ${\gamma}$-terpinene($13.8\%$), ${\rho}$-cymene($5.8\%$), 3-octanol($6.9\%$), carvone($40.9\%$). Carvone, major constituent of spearmint oil, also showed $100\%$ fumigation toxicity at $10{\mu}L/954mL$ air concentration.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.178-183
• /
• 2014

The objective of this study is to find out the effect of yeast on hair loss treatment and the role of hair follicle stem cell activator, which is important in hair growth. The authors have recently produced a substance, which has no disgusting odor, does not precipitates and does not easily corrupt, to use instead of yeast acquired from raw rice wine(Makgeolli). The substance is named Yeast Constituent Extract(YCE). In this research, the Produced YCE was applied on the hair loss area of 10 Androgenic alopecia patients, twice every day for 6 months, in order to test the effect of hair loss treatment and the role of stem cell activator. As a result, all of the patients showed a significant growth of hair after 3 months of test, and showed much more growing, thickening and strengthening of hair after 6 months. As a result of measuring the number of hair strings in the same scalp region of the patients after 6 months, it is found that the density of hair has increased, indicating that the hair loss treatment was effective. Also the hair follicle stem cell was isolated from the patients and the contents of growth factors (IGF, VEGF, FGF, HGF) derived from hair follicle stem cell were measured with ELISA. As result, the amount is found to be about 10 times greater than before the test. The hair follicle stem cell contains many growth factors that affect growth of hair, so it takes a highly important role in hair loss treatment. The YCE that the authors have produced was found to be effective in increasing the contents of growth factors that are derived from hair follicle stem cell. Thus it can be inferred that the YCE plays a role as a stem cell activator that activates the hair follicle stem cells. In conclusion, the YCE is considered to be highly effective for hair loss treatment and to have a role as a stem cell activator.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.273-288
• /
• 2011

Recently, the rankings of Korean container ports in terms of container handling cargo volume were plunged down due to the emerging Chinese ports. The efficient container ports strategies which increase container port competitiveness were requested. In this respect, it is urgently required to draw out constituent factors for Port Logistics, weigh these factors, and finally focus on improving the suggested factors. The aim of this paper is to evaluate weight and priority values for 'inner consisted factors' and 'outer requested factors' of port logistics by using the AHP(Analytic Hierarchy Process) method. As for the analysis regarding the inner consisted factors, the results were shown as follows: a storage and handling system (0.288) as the first rank; an information system of port logistics (0.210) as the second rank; an inland intermodal system (0.189) as the third rank; a ship's entering and departuring system (0.184) as the fourth rank, and a ship's berthing system (0.129) as the fifth rank. In terms of analysis regarding outer requested factors, the results came out as follows: a logistics cost (0.360) as the first rank; a port service (0.128) as the second rank; a connectivity (0.118) as the third rank; a hinterland condition (0.116) as the fourth rank; an convenience (0.106) as the fifth rank; a regional center (0.095) as the sixth rank, and an availability (0.077) as the seventh rank. For analyzing the priorities changes in constituent factors, the comparison of results between the year 2007 and the year 2011 was done. As the results, among inner consisted factors, 'information system of port logistics' was ranked first in the year 2007 while 'a storage and handling system' became the most important factor in the year 2011. Among the inner consisted factors, however, the logistics cost was the important factor in 2007 and 2011, respectively.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1164-1170
• /
• 1996

Studies were carried out to investigate the changes of constituent components in chestnuts (Castanea crenata Sieb. et Zucc) during storage at $20^{\circ}C$ for 9 weeks and $1^{\circ}C$ for 15 weeks. Ascorbic acid content of chestnut was 4.08 mg% in oxidized form and 17.7 mg% in reduced form which was 81.3% of total ascorbic acid. The reduced form gradually decreased during storage, while the oxidized forms increased during 5 weeks at $20^{\circ}C$ and 7 weeks at $1^{\circ}C$. The major organic acids in chestnut were malic acid, citric acid and quinic acid. Citric acid significantly decreased during storage, while malic acid increased during storage at $20^{\circ}C$ and decreased at $1^{\circ}C$. Free sugars in chestnuts were identified as glucose, fructose, sucrose and maltose. Glucose and fructose decreased after 5 weeks storage at $20^{\circ}C$ followed by an increase thereafter. Sucrose and maltose also increased. The major free amino acids in the chestnut were glutamic acid, aspartic acid, arginine, alanine, proline and serine. Glutamic acid, arginine, alanine, threonine, phenylalanine, valine and lysine increased during storage at $20^{\circ}C$, while proline, serine, isoleucine. leucine and ${\gamma}-aminobutyric$ acid decreased.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.6
• /
• pp.395-411
• /
• 2020

Background: This study investigated the anti-obesity effect of the flavonoid rich fraction (FRF) and its constituent, rutin obtained from the leaf of Morus alba L., on the lipid accumulation mechanism in 3T3-L1 adipocyte and C57BL/6 mouse models. Methods and Results: In Oil Red O staining, FRF (1,000 ㎍/㎖) treatments showed inhibition rate of 35.39% in lipid accumulation compared to that in the control. AdipoRedTM assay indicated that the triglyceride content in 3T3-L1 adipocytes treated with FRF (1,000 ㎍/㎖) was reduced to 23.22%, and free glycerol content was increased to 106.04% that of the control. FRF and its major constituent, rutin affected mRNA gene expression. Rutin contributed to the inhibition of Sterol regulatory element binding protein-1c (SREBP-1c) gene expression, and inhibited the transcription factors SREBP-1c, peroxisome proliferator-activated receptor gamma (PPAR-γ), CCAAT/enhancer binding protein α (C/EBPα), fatty acid synthase (FAS) and acetyl-CoA carboxylase (ACC). In addition, the effect of FRF administration on obesity development in C57BL/6 mice fed high-fat diet (HFD) was investigated. FRF suppressed weight gain, and reduced liver triglyceride and leptin secretion. FRF exerted potential anti-inflammatory effects by improving insulin resistance and adiponectin levels, and could thus be used to help counteract obesity. The mRNA expressions of PPAR-γ, FAS, ACC, and CPT-1 were determined in liver tissue. Quantitative real-time PCR analysis was also performed to evaluate the expression of IL-1β, IL-6, and TNF-α in epididymal adipose tissue. Compared to the control group, mice fed the HFD showed the up-regulation in PPAR-γ, FAS, IL-6, and TNF-α genes, and down-regulation in CPT1 gene expression. FRF treatement markedly reduced the expression of PPAR-γ, FAS, IL-6, and TNF-α compared to those in HFD control, whereas increased the expression level of CPT1. Conclusions: These results suggest that the FRF and its major active constituent, rutin, can be used as effective anti-obesity agents.

• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.11-22
• /
• 2023

This study was established to provide basic information necessary for ecological management to restore the naturalness of black locust (Robinia pseudoacacia L.) plantations located in the mountains of Gyeongbuk, Korea. Using vegetation data collected from 200 black locust stands, vegetation types were classified using the TWINSPAN method, the spatial arrangement status according to the environmental gradient was identified through DCA analysis, and a synoptic table of communities was prepared based on the diagnostic species determined by determining community fidelity (Φ) for each vegetation type. The vegetation types were classified into seven types, namely, Quercus mongolica-Polygonatum odoratum var. pluriflorum type, Castanea crenata-Smilax china type, Clematis apiifolia-Lonicera japonica type, Rosa multiflora-Artemisia indica type, Quercus variabilis-Lindera glauca type, Ulmus parvifolia-Celtis sinensis type, and Prunus padus-Celastrus flagellaris type. These types usually reflected differences in complex factors such as altitude, moisture regime, successional stage, and disturbance regime. The mean relative importance value of the constituent species was highest for black locust(39.7), but oaks such as Quercus variabilis, Q. serrata, Q. mongolica, Q. acutissima, and Q. aliena were also identified as important constituent species with high relative importance values, indicating their potential for successional trends. In addition, the total percent cover of constituent species by vegetation type, life form composition, species diversity index, and indicator species were compared.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.199-212
• /
• 2023

Diffusion is a powerful tool to understand geological processes recorded in terrestrial rocks as well as extraterrestrial materials. Since the diffusive exchange of elements or isotopes may have occurred differently in the solar nebula (high temperature and rapid cooling) and on the parent bodies (fluid-assisted thermal metamorphism at relatively low temperature), it is particularly important to model elemental or isotopic diffusion profiles within the mineral grains to better understand the evolution of the early solar system. A numerical model with the finite difference method for the fast grain boundary diffusion was established for the exchange of elements or isotopes between constituent minerals in a closed system. The fast grain boundary diffusion numerical model was applied to 1) ²⁶Mg variation in plagioclase of an amoeboid olivine aggregate (AOA) from a CH chondrite and 2) Fe-Mg interdiffusion between chondrules, AOA, and matrix minerals in a CO chondrite. Equilibrium isotopic fractionation and equilibrium partitioning were also included in the numerical model, based on the assumption that equilibrium can be reached at the interfaces of mineral crystals. The numerical model showed that diffusion profiles observed in chondrite samples likely resulted from the diffusive exchange of elements or isotopes between the constituent minerals. This study also showed that the closure temperature is determined not only by the mineral with the slowest diffusivity in the system, but also strongly depends on the constituent mineral abundances.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.593-596
• /
• 2003

The special amendment agent used in this study is mainly composed of inorganic metal salts such as sodium chloride, magnesium chloride, potassium chloride, calcium chloride, thus is friendly to the environment, and has a function of soil-cement-agent solidification. In this study, a series of laboratory and field experiments including unconfined compressive strength, permeability, pH test, constituent analysis, leaching test were carried out to analyse engineering and environmental characteristics of solidified sludge. The results of this research showed that the solidified sludge could be efficiently used in covering, filling, and planting materials.