• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.379-386
• /
• 1999

The adsorption and leaching of organophosphorus pesticides (phenthoate, diazinon, methidathion) were investigated in Namwon soli(black volcanic soil), Aewol soil(very dark brown volcanic soil) and Mureung soil(dark brown nonvolcanic soil) sampled in Cheju Island. The Freundlich constant, K value, was 52.4, 31.3 and 27.7 for phenthoate, diazinon and methidathion in Namwonsoil, respectively and decreased in the order of phenthoate, diazinon and methidathion among the pesticides. The K value of phenthoate was 52.4, 15.9 and 5.9 for Namwon, Aewol and Mureung soil, respectively and was the highest for Namwon soil with very high organic matter content and cation exchange capacity(CEC). The Freundlich constant, 1/n, showed a high correlation with organic matter content, i.e., its value was less than unity for organic matter rich soil(Namwon soil) and greater than unity for organic matter poor soil(Mureung soil). Total recoveries of pesticides in soil and leachate with leaching in soil column, were in the range of about 74~86%. The leaching of pesticides was less for phenthate with high K values, and more for methidathion with low K values among the pesticides. It was slower for Namwon soil with high K values, and more for methidathion with low K values among the pesticides. It was slower for Namwon soil with high K values, and faster for Mureung soil with low K values among the soils.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.338-341
• /
• 2005

In this paper, we present analytic forms of the ordered weighted averaging (OWA) operator weighting functions, each of which has properties of rank-based weights and a constant level of orness, irrespective of the number of objectives considered. These analytic forms provide significant advantages for generating OWA weights over previously reported methods. First, OWA weights can be efficiently generated by use of proposed weighting functions without solving a complicated mathematical program. Moreover, convex combinations of these specific OWA operators can be used to generate OWA operators with any predefined values of orness once specific values of orness are α priori stated by decision maker. Those weights have a property of constant level of orness as well. Finally, OWA weights generated at a predefined value of orness make almost no numerical difference with maximum entropy OWA weights in terms of dispersion.

• Tribology and Lubricants
• /
• v.16 no.4
• /
• pp.266-273
• /
• 2000

The friction characteristics of phenolic resin and model friction materials were investigated with the content of hexamethylenetetamine (HEXA). At 10 wt.% of HEXA, the phenolic resin and model friction materials showed the most stable friction coeffcient in constant temperature test at various test conditions because of its good thermal stability and proper curing reaction. It was found from constant interval test in mild condition that the friction coeffcients of friction materials cured with 10 wt.% of HEXA was the highest and stable values in the whole range of braking operations. However, at the severe condition in constant interval test, the friction coefficient of friction materials cured with 10 wt.% to of HEXA was lowered and as the number of braking operation increased, the values became stable. In order to obtain the thormal stable friction materials, the content of HEXA from 5 to 10 wt.% could be recommended.

• Journal of the Korean Ceramic Society
• /
• v.51 no.1
• /
• pp.32-36
• /
• 2014

The effects of an amphiphilic agent and the orientation of BN on the microwave dielectric properties of BN / polyvinyl butyral (PVB) composites were investigated as a function of the BN content in volume fractions from 0.1 to 0.5 ($V_f$). The plate-shaped BN samples were oriented in the PVB matrix by physical processes, in this case tape casting and laminate methods. With an increase in the BN content, the dielectric constant (K) increased because the K of BN was higher than that of the PVB. At the same BN content, composites with an in-plane orientation of the BN showed a higher dielectric constant than that of composites with a transverse orientation of the BN because the ceramics were oriented parallel to the electric field. All of the composites showed nearly constant K values ranging from 1 to 9.4 GHz, indicating good frequency stability over a wide frequency range. At the same frequency, the K values of the composites increased with an increase in the BN content.

• Electrical & Electronic Materials
• /
• v.1 no.1
• /
• pp.44-53
• /
• 1988

In this study, PZT/PVDF composites with O-3 phase connectivity were prepared by hot pressing method, and the dielectric and piezoelectric properties as a function of PZT volume fraction were investigated. A modified cubic model was introduced to explain the influence of the PZT volume fraction on the experimentally determined dielectric constant. As A n=0.125, the measured dielectric constant values agreed with the calculated values. It was found that dielectric constant .xi.$_{33}$ and piezoelectric coefficient d$_{33}$ increased with indreasing PZT volume fraction, and hydrostatic piezoelectric figure of merit d/aub h/.g$_{h}$ was improved relative to that of the PZT single phase material.l.l.l.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.977-978
• /
• 2007

The phase angle which is mainly depend on time constant $\tau$ of the calculable 10 A and 0.1 ${\Omega}ac/dc$ resistor has been analysed. The low values of resistors are usually inductive and time constant $\tau$ very large compare to high values of resistors. The numerical analysis has been shown that the time constant $\tau$ becomes zero when introduce the compensation capacitance geometrically to the resistive coil with proper dimension. As a result a very low phase angle can be achieved within the realizable dimensions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.335-342
• /
• 2000

In this study, the swelling characteristics of reconstituted clayey soil were investigated by STD and CRS test. The strain rate during loading was constant i.e. 0.05 %/min, 0.03 %/min and during unloading was varied in proportion to 1/1, 1/5, 1/10 and 1/15 of strain rate during loading. From this study the following conclusions were obtained; (1) There were similar values, especially, during unloading in case of 1/10 or 1/15 of strain rate during loading and the test results between STD and CRS were much to be alike. (2) The cross point of effective stress versus excess pore water pressure ratio curve, was increased during unloading, while the stress level of the cross point was decreased. The stress level can be separated into two zones according to the swelling index named Cs1 and Cs2. From the test results, the values of Cs1 were approximately constant irrespective of strain rate during unloading, but the values of Cs2 were much influenced by strain rate. (3) In CRS consolidation tests, it was found that unloading strain rate did not affect on the existence of zone.

• 전기의세계
• /
• v.26 no.4
• /
• pp.41-53
• /
• 1977

With the equivalent series circuit analyzed aby revolving field theory and drawn by using the equivalent circuit constant ratios in capacitor motor with windings not in quadrature having space harmonics in its magnetic field (the above ratios are the equivalent circuit constants for the fundamental flux to the magnetizing reactance of the circuit), the equation for the alternating torque with twice line freequency in the motor is directly derived, and the alternating torque is measured with the self-made stator vibration angle amplitude measuring apparatus that is composed of a pickup, filter, photoelectric pickoff etc. The measured values satisfactorily compared with computed values. The properties of the alternating torque characteristics for respective harmonic fluxes and the r5esultant alternating torque characteristic, the effects of the alternating torque characteristics for respective harmonic fluxes on the resultant alternating torque characteristic, the effects of the variation in the motor constants and the equivalent circuit constant ratios for the fundamental flux on the alternating torque characteristics for respective harmonic fluxes and the resultant alternating torque characteristic, are made clear, applying the equation. There exist the optimum values of the motor constants and the equivalent circuit constant ratios for the fundamental flux for decreasing the alternating torque, and the value could be determined in design by the method presented in this paper.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.55-61
• /
• 2016

PURPOSES : The objective of this study was to determine the relationship between the dielectric characteristics of asphalt mixtures and the air voids present in them using ground penetrating radar (GPR) testing. METHODS : To measure the dielectric properties of the asphalt mixtures, the reflection coefficient method and the approach based on the actual thickness of the asphalt layer were used. An air-couple-type GPR antenna with a center frequency of 1 GHz was used to measure the time for reflection from the asphalt/base layer interface. A piece of aluminum foil was placed at the interface to be able to determine the reflection time of the GPR signal with accuracy. An asphalt pavement testbed was constructed, and asphalt mixtures with different compaction numbers were tested. After the GPR tests, the asphalt samples were cored and their thicknesses and number of air voids were measured in the laboratory. RESULTS : It was found the dielectric constant of asphalt mixtures tends to decrease with an increase in the number of air voids. The dielectric constant values estimated from the reflection coefficient method exhibited a slight correlation to the number of air voids. However, the dielectric constant values measured using the approach based on the actual asphalt layer thickness were closely related to the asphalt mixture density. Based on these results, a regression equation to determine the number of air voids in asphalt mixtures using the GPR test method was proposed. CONCLUSIONS : It was concluded that the number of air voids in an asphalt mixture can be calculated based on the dielectric constant of the mixture as determined by GPR testing. It was also found that the number of air voids was exponentially related to the dielectric constant, with the coefficient of determination, $R^2$, being 0.74. These results suggest that the dielectric constant as determined by GPR testing can be used to improve the construction quality and maintenance of asphalt pavements.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.656-662
• /
• 1998

To make a distinction between the influence of the dielectric constant and of methanol concentration on trypsin-catalyzed hydrolysis and methanolysis at $0^{\circ}C$, a model reaction of $N^u$-benzyloxycarbonyl-L-lysine p-nitrophenyl ester with water-methanol mixtures was chosen and a kinetic study done. The $k_{cat}$ values increased with methanol concentration, in a linear manner whereas $K_{M}$ values increased in a log-linear fashion. However, the $k_{cat},$_{M}$ ratio increased at lower methanol concentrations than 30% and then began to decrease at higher concentrations. The decrease in $k_{catK_M}$observed at higher than 30% methanol concentrations is attributed to the hydrophobic partitioning effect on substrate binding. On the other hand, the increase in $k_{catK_M}$ in the 0~30% methanol concentration range seems to be due to the effect of nucleophilic cosolvent on $k_{cat}$ and of the dielectric constant on $k_m$. This explanation was verified by measuring the effect of varying the dielectric constant of the medium on kinetic constants with isopropyl alcohol chemically unrelated to the enzyme reaction as the methanol concentration is maintained at a constant level. Therefore, we conclude that the effect of increasing the methanol concentration in the model reaction on the kinetic parameters $k_{cat \;and\;{K_M}}$ is caused by changes in both the nucleophilicity and the dielectric constant of the medium. Based on product analysis, the increase in $k_4, k_3$by decreasing the temperature can be accounted for by the suppression of hydrolytic reactions. This observation indicates that the nucleophile is favored by low temperatures. There was no loss of trypsin activity over a 10 h period in 60% methanol concentration at $pH^＊\; 5.5,\; 0^{\circ}C$.EX>.