• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.409-414
• /
• 2015

M125 booster is one of the reliable S&A device(safety and arming device) to determine the arming distance of fuze for gun ammunitions from 90 mm to 8 inch in diameter. And it is also well known that the arming distance of M125 booster is determined by the multiplication value of the gun tube property(traveled distance per turn of projectile) and the S&A device property(number of turns to arm), not by the projectile muzzle velocity. We have tried and succeeded in executing a proper analysis on M125 booster to figure out its characteristic constant of arming distance by considering only the gun tube properties and the S&A device properties. More detailed arming distance will be analyzed in the future by considering dynamic characteristics on all elements in the S&A device with vector analysis.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.295-299
• /
• 2011

Blind equalization techniques have been widely used in wireless communication systems. In this paper, we propose to apply the balanced information potentials to the criterion of minimum Euclidian distance between two PDFs with constant modulus errors for adaptive blind equalizers. One of the two PDFs is constructed with constant modulus error samples and another does with Dirac delta functions. Two information potentials derived from the criterion are balanced in order to have better performance by putting a weighting factor to each information potentials. The proposed blind algorithm has shown in the MSE convergence performance that it can produce enhanced performance by over 3 dB of steady state MSE.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.125-128
• /
• 2000

In this paper, we report a new damping circuit with a constant damping rate for RFID applications. The proposed damping circuit is used along with a over-voltage limiter and exhibits almost constant damping rates when the distance between the reader and the transponder varies. This results in keeping the power supply voltage of the transponder constant and in improved reading distances.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.75.2-75.2
• /
• 2012

SNe Ia are a well-known powerful distance indicator. Type Ia supernova (SN) 2011fe was discovered in the nearby spiral galaxy M101 in 2011. It was discovered in less than one day after its explosion and is one of the nearest SNe Ia. Therefore SN 2011fe plays a significant role for calibrating the luminosity of the SNe Ia as well as for studying the progenitors of SNe Ia. However, previous estimates of the distance to M101 based on various methods show a large range. We present a new determination of the distance to M101 using the tip of the red giant branch (TRGB) method. We measure the distance from the F555W and F814W images of nine fields taken with the HST/ACS and HST/WFPC2 available in the HST archive. We derive a distance estimate with much smaller errors than previous studies. We discuss the implication of our results in relation with the calibration of optical and near-infrared maximum magnitudes of SNe Ia and the Hubble Constant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.760-767
• /
• 2010

For complex channel blind equalization, this study presents the performance and characteristics of two complex blind information theoretic learning algorithms (ITL) which are based on minimization of Euclidian distance (ED) between probability density functions compared to constant modulus algorithm which is based on mean squared error (MSE) criterion. The complex-valued ED algorithm employing constant modulus error and the complex-valued ED algorithm using a self-generated symbol set are analyzed to have the fact that the cost function of the latter forces the output signal to have correct symbol values and compensate amplitude and phase distortion simultaneously without any phase compensation process. Simulation results through MSE convergence and constellation comparison for severely distorted complex channels show significantly enhanced performance of symbol-point concentration with no phase rotation.

• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.17-28
• /
• 1994

Chip breaking is important in lathe work for maintaining good surface of the products and safety of operator. The purpose of this study is to investigate the performance of chip breaking and chip shape resulted from the carbide inserts with grooved type and obstruction type chip breaker. Experiments have been performed under the following cutting conditions, (1) constant cutting speed with variable depth of cut and feed rate, (2) constant depth of cut with variable cutting speed and feed rate. Also, the flying distance of chip and it's distribution have been investigated. As a results, good performance of chip breaking can be obtained for small radius of curvature and land width of grooved type chip breaker. And the thickness of chip increase with the increase of feed rate and decrease of cutting speed, and the chip breaking becomes easier with the increase of chip thickness due to the large deformation rate. Obstraction type chip breaker shows better performance of surface roughness than the grooved type. The flying distance of the chips over 90% are less than 1 meter, and the distance decreases as the feed rate decreases.

• Korean Journal of Mathematics
• /
• v.7 no.2
• /
• pp.207-213
• /
• 1999

In this paper we estimate a lower bound of the Banach-Mazur distance between a finite dimensional nonlocally convex space and its Banach envelope space by investigating the properties of the nonlocally convex space and the projection constant which are obtained by factoring the identity operator through $l^k_{\infty}$ on the quasi-normed spaces.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.68.1-68.1
• /
• 2014

M74 is a nearby face-on spiral galaxy that hosts three core-collapse supernovae (SNe) : SN Ic 2002ap, SN II-P 2003gd, and SN II-P 2013ej. Therefore it is an ideal target to investigate the properties of the core-collapse SNe and to improve the calibration of Type II-P SNe as a standardizable candle. However, its distance is not well known. We present a new distance estimate to M74 based on the tip of the red giant branch (TRGB). From the photometry of archival F555W and F814W images taken with the Hubble Space Telescope, we derive the TRGB to be at $ITRGB=26.13{\pm}0.02$ and the distance modulus to be $30.04{\pm}0.04$ (random) ${\pm}0.12$ (systematic) (corresponding to a linear distance, $10.19{\pm}0.14{\pm}0.56Mpc$). With this result, we calibrate the standardized candle method of SNe II-P. From the absolute magnitude of SN 2003gd corrected for its expansion velocity and reddening, we derive the value of the Hubble constant, $H0=72{\pm}6{\pm}7km\;s-1\;Mpc-1$. It is in agreement with the uncertainty with the recent estimates based on the luminosity calibration of Type Ia SNe.

• Macromolecular Research
• /
• v.8 no.2
• /
• pp.53-58
• /
• 2000

Stabilities and structures of resorcinol formaldehyde resins (RF resins) and their dependence on solvent were studied by molecular mechanics and molecular dynamics. Dimers to decamers of the RF resins in the conditions of dielectric constant = 1.00, 21.01, 36.64, and 80.10 were calculated. The average distance between oxygen atoms in 1-hydroxyl groups of adjacent resorcinols of the resins became longer with increased dielectric constant of the environment. The number of intramolecular hydrogen bonds of the resins decreased by increasing the dielectric constant of the environment. The RF resin structure on the surface of fabric or steel cord was explained based on the present calculation.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1693-1701
• /
• 2002

The intermittent spray characteristics of a multi-hole and a single-hole diesel nozzle were experimentally investigated. The hole number of the multi-hole nozzle was 5, and the hole diameter of the 5-hole and the single-hole nozzle was the same as d$\_$n/=0.32 ㎜ with the constant hole length to diameter ratio(l$\_$n//d$\_$n/=2.81). The droplet diameters of the spray, including the time-resolved droplet diameter, SMD (Sauter mean diameter) and AMD (arithmetic mean diameter) , injected intermittently from the two nozzles into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer). Through the time-resolved evolutions of the droplet diameter, it was found that the structure of the multi-hole and the single-hole nozzle spray consisted of the three main parts : (a) the leading edge affected by surrounding air. and composed of small droplets; (b) the central part surrounded by the leading edge and mixing flow region and scarcely affected by the resistance of air, (c) the trailing edge formed by the passage of the central part. The SMD decreases gradually with the increase in the radial distance, and the constant value is obtained at the outer region of the radial distance (normalized by hole diameter) of 7-8 and 6 for the 5-hole and single-hole nozzle, respectively. The SMD along the centerline of the spray decrease shapely with the increase in the axial distance after showing the maximum value near the nozzle tip. The SMD remains the constant value near the axial distance(normalized by hole diameter) of 150 and 180 for the 5-hole and the single-hole nozzle, respectively.