• 환경영향평가
• /
• 제33권2호
• /
• pp.84-98
• /
• 2024

본 연구는 인천, 수원, 원주, 양산 지역에서 발파작업 동안 취득한 320개의 발파 진동 및 발파 소음 데이터를 사용하여, 발파 진동 및 발파 소음 추정에 적용가능한 예측식을 개발하였다. 발파진동 예측식은 회귀분석결과, SRSD 및 CRSD에 의한 상관계수가 각각 0.879, 0.890이며 두 경우 모두 R² ≥ 0.7로 나타났다. 발파소음 예측식은 단계적 회귀분석을 수행한 결과, 상관계수는 0.911, R² ≥ 0.7로 유의미하게 높은 상관관계를 보였다. 상수값 결정을 위한 추가 회귀분석 결과 상관계수는 0.881, R² ≥ 0.7로 나타났다. 상기의 결과, 개발된 예측식이 다른 도시지역의 재건축사업이나 공동주택 건설에 따른 환경영향평가나 교육환경평가의 소음·진동분야 보고서 작성 시 정합성이 높은 발파소음·진동 예측값을 도출할 수 있을것으로 기대한다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2008

In the process of continuous hot-dip galvanizing, it is well known that the gas wiping through an air knife system is most effective because of its uniformity in coating thickness, possibility of thin coating, workability in high speed, and simplicity of control. However, gas wiping used in the galvanizing process brings about a problem of splashing at the strip edge above a certain high speed of process. It is also known that the problem of edge splashing is more harmful than that at the mid strip surface. For a given liquid(of a certain viscosity and surface tension), the onset of splashing mainly depends upon the strip velocity, the gas-jet pressure, and the nozzle's stand-off distance. In these connections in the present study, we proposed three kinds of air knife system having nozzles of constant expansion rate, and compared the jet structures issuing from newly proposed nozzle systems with the result by a conventional one. In numerical analysis, the governing equations are consisted of two-dimensional time dependent Navier-Stokes equations, and the standard k-${\varepsilon}$ turbulence model is employed to solve turbulence stress and so on. As the result, it is found that we had better use the constant expansion-rate nozzle which can be interpreted from the point view of the energy saving for the same coating thickness. Also, we better reduce the size of separation bubble and enhance the cutting ability at the strip surface, by using an air-knife having constant expansion-rate nozzle.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.27-32
• /
• 2008

This paper describes a contact atomic force microscope (AFM) that can be used for high-speed precision measurements of microstructured surfaces. The AFM is composed of an air-bearing X stage, an air-bearing spindle with the axis of rotation in the Z direction, and an AFM probe unit. The traversing distance and maximum speed of the X stage are 300 mm and 400 mm/s, respectively. The spindle has the ability to hold a sample in a vacuum chuck with a maximum diameter of 130 mm and has a maximum rotation speed of 300 rpm. The bandwidth of the AFM probe unit in an open loop control circuit is more than 40 kHz. To achieve precision measurements of microstructured surfaces with slopes, a scanning strategy combining constant height measurements with a slope compensation technique is proposed. In this scanning strategy, the Z direction PZT actuator of the AFM probe unit is employed to compensate for the slope of the sample surface while the microstructures are scanned by the AFM probe at a constant height. The precision of such a scanning strategy is demonstrated by obtaining profile measurements of a microstructure surface at a series of scanning speeds ranging from 0.1 to 20.0 mm/s.

• 한국추진공학회지
• /
• 제6권1호
• /
• pp.47-54
• /
• 2002

본 연구에서는 대기압하에서의 탄화수소계 연료인 제트유 연료액적에 대한 연소시 나타나는 액적의 연소특성 및 1차원 액적배열구조를 갖는 액적연소시 액적간격이 연소율 상수에 미치는 영향을 실험적으로 고찰하였다. 실험결과, 탄화수소계 연료인 제트유(jet A-1)는 실험조건하에서 단일 연료액적의 연소에 대해 액적크기에 상관없이 일정한 연소율 상수 $\kappa_c= 0.915{mm}^2$ 를 유지하였으며 대기압하에서 액적직경의 제곱$(d^2)$은 시간에 대하여 선형함수를 얻을 수 있었다. 또한, 1차원 배열구조를 갖는 액적연소(액적간격 $l/d_o$가 1.208~2.922)사이에 있어서 액적간격이 감소 할수록 액적의 연소율 상수 ${\kappa}_c$는 감소하였으며, 일정 액적간격을 가지는 액적군 연소시 3번째 액적 보다 2번째 액적의 연소율상수 ${\kappa}_c$에 미치는 영향이 더 크게 나타났다.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.171-180
• /
• 2018

To optimize the shape of the electrostatic precipitator for the removal of particulate matter in subway environments, the wind-tunnel experiments were carried out to characterize collection efficiency and ozone emission rate. As a standardized parameter, power consumption divided by the square of flow velocity, was increased, the $PM_{10}$ collection efficiency increased. If the standardized parameter is higher than 1.0 due to high power consumption or low flow velocity, increase in thickness of electrodes from 1 to 2 mm, or increase in distance of collection plates from 5 to 10 cm did not change the $PM_{10}$ collection efficiency much. Increase in thickness of high-voltage electrodes, however, can cause decrease in $PM_{10}$ collection efficiency by 28% for low power consumption and high flow velocity. The ozone emission rate decreased as distance of collection plates became wider, because the ozone emission rate per unit channel was constant, and the number of collection channels decreased as the distance of collection plates increased. When the distance of collection plates was narrow, the ozone emission rate increased with the increase of the thickness of electrodes, but the difference was negligible when the distance of collection plates was wide. It was found that the electrostatic precipitator having a thin high-voltage electrodes and a narrow distance of collection plates is advantageous. However, to increase the thickness of high-voltage electrodes, or to increase the distance of collection plates is needed, it is necessary to increase the applied voltage or reduce the flow rate to compensate reduction of the collection efficiency.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.45-51
• /
• 1999

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise due to the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan and to calculate the effects of rotating velocity, flow rate, cut-off distance and the number of blades and its effects on the noise of the fan. We assume that the impeller rotates with a constant angular velocity and the flow field around the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated with the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. The cut-off distance is the most important factor effecting the noise generation. Acoustic pressure is proportional to 2.8, which shows the same scaling index as the experimental result. In this paper, the cut-off distance is found to be the dominant parameter offecting the acoustic pressure.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.527-536
• /
• 2009

본 연구의 목적은 박판 탄소강 일면전단 2행 2열 볼트접합부의 블록전단파단거동과 면외변형의 영향을 조사하는 것이다. 하중직각 방향 연단거리, 볼트직경, 피치, 게이지 치수를 고정하고 블록전단파단이 발생하도록 실험체를 계획한다. 접합평판의 두께, 하중방향연단거리를 주요변수로 설정한다. 단순인장 실험을 실시하고 블록전단파단 양상, 최대내력을 현행의 설계기준식에 의한 예측치와 비교한다. 또한, 판 두께와 연단거리에 따른 하중방향과 직각방향으로 발생하는 면외변형의 발생조건을 조사하고 면외변형의 발생으로 인한 내력저하정도를 고찰한다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.647-652
• /
• 2005

선박이 수로 측벽부근을 항해할 경우, 수로 측벽은 선박에 작용하는 유체력과 모멘트를 유발시킨다. 이와 마찬가지로 근접 항해중인 두 선박간에도 상호간섭력이 작용한다. 수로 측벽부근을 항해하는 경우와 근접 항해중인 두 선박의 경우의 주요 차이는 선박의 경우에 비하여 수로 측벽은 길고 일정한 형태를 갖추고 있다. 두 선박간의 상호간섭력은 종방향 거리 $\chi_0$, 횡방향 거리 $y_0$ 및 두선박의 속도의 함수로서 가정될 수 있다. 본 연구에서는 근접 항해중인 두 선박간의 간섭력을 계산하고, 두 선박간의 횡방향 및 종방항 거리와 속도에 따른 안전 항과 거리에 대해서 검토, 고찰하였다.

• Wind and Structures
• /
• 제19권1호
• /
• pp.1-14
• /
• 2014

Rail-mounted cranes can be easily damaged by a sudden gust of wind while working at a running speed, due to the large mass and high barycenter positions. In current designs, working rail-mounted cranes mainly depend on wheel braking torques to resist large wind load. Regular brakes, however, cannot satisfactorily stop the crane, which induces safety issues of cranes and hence leads to frequent crane accidents, especially in sudden gusts of wind. Therefore, it is necessary and important to study the braking performance of working rail mounted cranes under wind load. In this study, a simplified mechanical model was built to simulate the working rail mounted gantry crane, and dynamic analysis of the model was carried out to deduce braking performance equations that reflect the qualitative relations among braking time, braking distance, wind load, and braking torque. It was shown that, under constant braking torque, there existed inflection points on the curves of braking time and distance versus windforce. Both the braking time and the distance increased sharply when wind load exceeded the inflection point value, referred to as the threshold windforce. The braking performance of a 300 ton shipbuilding gantry crane was modeled and analyzed using multibody dynamics software ADAMS. The simulation results were fitted by quadratic curves to show the changes of braking time and distance versus windforce under various mount of braking torques. The threshold windforce could be obtained theoretically by taking derivative of fitted curves. Based on the fitted functional relationship between threshold windforce and braking torque, theoretical basis are provided to ensure a safe and rational design for crane wind-resistant braking systems.

• Animal cells and systems
• /
• 제2권4호
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.