• 제어로봇시스템학회논문지
• /
• 제19권1호
• /
• pp.56-64
• /
• 2013

We propose an efficient minimum-time cornering motion planning algorithms for differential-driven wheeled mobile robots with motor control input constraint, under piecewise constant control input sections. First, we established mobile robot's kinematics and dynamics including motors, divided the cornering trajectory for collision-free into one translational section, followed by one rotational section with angular acceleration, and finally the other rotational section with angular deceleration. We constructed an efficient motion planning algorithm satisfying the bang-bang principle. Various simulations and experiments reveal the performance of the proposed algorithm.

• 대한수학회지
• /
• 제37권5호
• /
• pp.779-791
• /
• 2000

The nonlinear stage of the evolution of free boundary between a light fluid and a heavy fluid driven by an external force is studied by a potential flow model with a source singlarity. The potential flow model is applied to a bubble and spije evolution for constantly accelerated interface (Rayleigh-Taylor instability) and impulsively accelerated interface (Richtmyer-Meshkow instability). The numerical results of the model show that, in constantly accelerated intergace, bubble grows with constant velocity and the spike falls with gravitational acceleration at later times, while the velocity of the bubble in impulsively accelerated interface decay to zero asymp flow model for the bubble and spike for constantly accelerated interface and impulsively accelerated interface.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.132-138
• /
• 1997

Six different types of velocity profiles of trolley movement of a container crane are investigated for the minimal sway angle at the target trolley position. Three velocity patterns which include trapezoidal, stepped and notched-type velocity patterns are obtained assuming constant rope length. The notched type velocity pattern is shown to be derived from the time-optimal bang-bang control. The stepped type velocity pattern can be shown to be derived as bang-off bang control as well. Considering the damping effect due to hoist motion a double stage acceleration pattern is also analyzed. The main objective of the paper is to show how much time-reduction can be obtained among several velocity patterns appearing in the literature.

• 한국멀티미디어학회논문지
• /
• 제21권2호
• /
• pp.87-97
• /
• 2018

Maximum intensity projection (MIP) is a common visualization technique in medical imaging system. A typical method to improve the performance of MIP is empty space leaping, which skips unnecessary area. This research proposes a new method to improve the existing empty space leaping. In order to skip more regions, we introduce a variety of acceleration strategies that use some tolerance given by the user to take part in image quality loss. Each proposed method shows various image quality and speed, and this study compares them to select the best one. Experimental results show that it is most efficient to add a constant tolerance function when the image quality required by the user is low. Conversely, when the user required image quality is high, a function with a low tolerance of volume center is most effective. Applying the proposed method to general MIP visualization can generate a relatively high quality image in a short time.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.88-94
• /
• 2009

In this paper, vibration characteristics after applying variable speed control to fans with a rated speed used in a power plant are studied by performing experiments and analyzing finite element models. Then the campbell diagram is presented to verify the reason of the abnormal vibration measured from fan structure during variable operation of Forced Draft Fan & Induced Draft Fan. According to results, it is found that amplitude of acceleration increases abruptly when a 2X harmonic component meets the natural frequency of fan rotor. Therefore it is very important thing that investigate exactly dynamic characteristics for the rotor at variable speed zone before applying variable speed control to a rotor with a rated speed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.38-42
• /
• 2000

In this study, the low velocity impact behavior of the composite laminates has been described by using 3 dimensional nonlinear finite elements. To describe the geometric nonlinearity due to large deformation, the dynamic contact problem is formulated using the exterior penalty finite element method on the base of Total Lagrangian formulation. The incremental decomposition is introduced, and the converged solution is attained by Newton-Raphson Method. The Newmark's constant-acceleration time integration algorithm is used. To make verification of the finite element program developed in this study, the solution of the nonlinear static problem with occurrence of large deformation is compared with ABAQUS, and the solution of the static contact problem with indentation is compared with the Hertz solution. And, the solution of low velocity impact problem for isotropic material is verificated by comparison with that of LS-DYNA3D. Finally the contact force of impact response from the nonlinear analysis are compared with those from the linear analysis.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.353-360
• /
• 2000

A design of PIDA(Proportional-Integral-Derivative-Acceleration) controller for the third-order plant using the CDM(Coefficient Diagram Method) is presented. Using CDM, the closed-loop system with the designed PIDA controller can be made stable and satisfied both the transient and steady state response specifications without any adjustment. The effect of output step disturbance can also be lastly rejected. The fast step response of the controlled system can be achieved by reducing the equivalent time constant. The MATLABs simulation results show that the performances of the designed controlled system using CDM is better than the performance of the controlled system using PIDA controller designed by its own technique.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1990-2001
• /
• 1991

본 연구에서는 평활부 및 응력집중부에 표면균열을 갖는 표면균열재의 피로수 명과 균열관통 거동을 검토하고, 그 특성을 해명하였다.

• 오토저널
• /
• 제15권3호
• /
• pp.36-46
• /
• 1993

In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.227-231
• /
• 1994

The stability of red ginseng saponin in aqueous solution was studied with the acceleration test method. The degradation rate constant of ginsenoside Rb1, an index component of red ginseng saponin, was $2.371{\times}10^{-4}\;day^{-1}$ at $20^{\circ}C$, and the shelf-life was about 570 days. The pH-rate profile demonstrated that the most stable range was pH 6-8. Mannitol and benzyl alcohol, common excipients for injection, exerted no influence on the degradation reaction of ginsenoside Rb1.