• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.888-908
• /
• 2011

The increasing demand from passengers in vehicles to improve safety, traffic efficiency, and comfort has lead to the growing interest of Wi-Fi based vehicle-to-infrastructure (V2I) communications. Although the V2I system provides fast and cost-effective Internet connectivity to vehicles via roadside Wi-Fi access points (APs), it suffers from frequent handoffs due to the high mobility of vehicles and the limited coverage of Wi-Fi APs. Recently, the Mobile AP (MAP) platform has emerged as a promising solution that overcomes the problem in the V2I systems. The main advantage is that MAPs may yield longer service duration to the nearby vehicles that have similar mobility patterns, yet they provide smaller link capacities than the roadside APs. In this paper, we present a new association control technique that harnesses available connection duration as well as achievable link bandwidth in high-speed vehicular network environments. We also analyze the tradeoff between two association metrics, namely, available connection duration and achievable link bandwidth. Extensive simulation studies based on real traces demonstrate that our scheme significantly outperforms the previous methods.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.213-222
• /
• 2009

IEEE 802.15.3 HR-WPAN is designed to enable wireless connectivity of high-speed, low-power, low-cost multimedia-capable portable consumer electronic devices. For quality of service, the standard specifies the use of TDMA (Time Division Multiple Access). However, during low contention TDMA gives much lower channel utilization and higher delays than CSMA (Carrier Sensing Multiple Access) because in TDMA, a node can transmit only during its scheduled time slots whereas in CSMA, nodes can transmit at any time as long as there is no contention. By mixing CSMA and TDMA, Hybrid MAC becomes more robust to timing failures, time-varying channel conditions, slot assignment failures and topology changes than a stand-alone TDMA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.425-426
• /
• 2016

In this paper, we proposed an algorithm based on movement prediction using Markov chain in delay tolerant networks(DTNs). The existing prediction algorithms require additional information such as a node's schedule and connectivity between nodes. However, network reliability is lowered when additional information is unknown. To solve this problem, we proposed an algorithm for predicting a movement path of the node by using Markov chain. The proposed algorithm maps speed and direction for a node into state, and predict movement path of the node using transition probability matrix generated by Markov chain. As the result, proposed algorithm show that the proposed algorithms has competitive delivery ratio but with less average latency.

• The Journal of Information Systems
• /
• v.28 no.1
• /
• pp.183-206
• /
• 2019

Purpose Research purpose is extraction of the factors affecting game flow and satisfaction in mobile game. Design/methodology/approach In mobile game, the factors affecting game flow were classified into three parts: mobile game platform characteristics, user cognition characteristics, and user individual characteristics through previous studies for existing online game and mobile game. In the research we extracted the factors as follows: the connectivity, usability, network speed, pleasure, service quality, relatedness, proficiency, self-fulfillment, early adopter tendency, and competitive spirit. Using the factors, we established research model and tested hypotheses empirically. This survey was conducted five months targeting from teenagers to fifties with mobile game experience. The questionnaire items were reconstructed according to the questionnaires of the present study or those newly developed by the game experts and total 56 items in the literature of Internet game, smartphone game, and mobile game based on the existing literature study respectively. Findings According to the analysis result, this study showed that ease of use, enjoyment, self - fulfillment and competitive spirit had a significant influence on user flow and also that service quality, proficiency and competitive spirit had a significant influence on user satisfaction in mobile games.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.644-647
• /
• 2004

Optical add/drop multiplexers (OADMs), one of the new network elements, will play a key role enabling greater connectivity and flexibility in the dense wavelength-division multiplexing (DWDM) networks. The importance of OADMs is that they allow the optical network to be local transmitting/extraction on a wavelength-by-wavelength basis to optimize traffic, efficient network utilization, network growth, and to enhance network flexibility. Also, the automatic assembly system of micro optical filters and fibers is a key technology in the development of optical modules with high functionality. Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. In this research, we have developed a system capable of automatic alignment of a film filter and a lensed fiber in order to improve the speed and losses in the optical fiber to filter alignment of optical modules. Using the developed automatic alignment system and silicon optical benches, we have fabricated the micro OADM and measured the insertion loss and aging effect.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.647-653
• /
• 2012

A short reaction mechanism for premixed $CH_4$-air flames at high pressure was developed using a reduction method based on the combined application of the simulation error minimization connectivity method and the iterative species-removal sensitivity method. It consisted of 43 species and 554 elementary reactions under the condition that it produces less than 5% of the maximum error. The flame structures obtained using a detailed reaction mechanism and the short reaction mechanism were compared for $CH_4$-air flames with various initial temperatures and equivalence ratios at high pressure, and the results were in good agreement. Therefore, the short reaction mechanism developed could reproduce the flame speeds, temperatures, and concentrations of major and minor species at high pressure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1287-1295
• /
• 2015

Recently, fieldbus communication technologies have been widely deployed for industrial automation because they are profitable in providing easy system integration and management for multiple devices, as well as high-speed communication. It is essential for smart encoders to support fieldbus connectivity, where the device configuration and various types of information related to position are exchanged between an external controller and multiple encoders over the communication link. In this study, we implemented the CiA 406 device profile for smart encoders from the CANopen standards by extending an open-source CANopen standard-compliant framework, called CanFestival. The CiA 406 functionalities implemented in this study were validated on a test-bed consisting of a CANopen master and virtual CANopen encoders with our CiA 406 extension module.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.2 s.12
• /
• pp.39-49
• /
• 2004

An increasing number of distributed applications will be achieved with mobile technology. These applications face temporary loss of network connectivity when they move. They need to discover other hosts in an ad-hoc manner, and they are likely to have scarce resources including CPU speed, memory and battery power. Software engineers building mobile applications need to use a suitable middleware that resolves these problems and offers appropriate support for developing mobile applications. In this paper, we describe the meta-server building for middleware that addresses reflective context awareness and present usability with demonstration. Metadata is consist of user configuration, device configuration, user context, device context and dynamic image metadata. When middleware send a saving or retrieval request to meta-server, it returns messages to middleware after the verification of the request. This meta-server has the application for multimedia stream services with context awareness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1013-1019
• /
• 2016

This paper describes a novel Context-awareness Markov Chain Prediction (CMCP) algorithm based on movement prediction using Markov chain in Delay Tolerant Network (DTN). The existing prediction models require additional information such as a node's schedule and delivery predictability. However, network reliability is lowered when additional information is unknown. To solve this problem, we propose a CMCP model based on node behaviour movement that can predict the mobility without requiring additional information such as a node's schedule or connectivity between nodes in periodic interval node behavior. The main contribution of this paper is the definition of approximate speed and direction for prediction scheme. The prediction of node movement forwarding path is made by manipulating the transition probability matrix based on Markov chain models including buffer availability and given interval time. We present simulation results indicating that such a scheme can be beneficial effects that increased the delivery ratio and decreased the transmission delay time of predicting movement path of the node in DTN.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2389-2413
• /
• 2015

High data rates in long-term evolution (LTE) networks can affect the mobility of networks and their performance. The speed and motion of user equipment (UE) can compromise seamless connectivity. However, a proper handover (HO) decision can maintain quality of service (QoS) and increase system throughput. While this may lead to an increase in complexity and operational costs, self-optimization can enhance network performance by improving resource utilization and user experience and by reducing operational and capital expenditure. In this study, we propose the self-optimization of HO parameters based on fuzzy logic control (FLC) and multiple preparation (MP), which we name FuzAMP. Fuzzy logic control can be used to control self-optimized HO parameters, such as the HO margin and time-to-trigger (TTT) based on multiple criteria, viz HO ping pong (HOPP), HO failure (HOF) and UE speeds. A MP approach is adopted to overcome the hard HO (HHO) drawbacks, such as the large delay and unreliable procedures caused by the break-before-make process. The results of this study show that the proposed method significantly reduces HOF, HOPP, and packet loss ratio (PLR) at various UE speeds compared to the HHO and the enhanced weighted performance HO parameter optimization (EWPHPO) algorithms.