• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.405-416
• /
• 2006

In composite girders with steel embedded in concrete as preflex beams, horseshoe connectors and bar connectors are commonly used to achieve composite action. Considering the requirements on the concrete cover in the thin concrete part surrounding a steel member, it has limitations with respect to the use of stud shear connectors, and significant bond and friction resistance can be generated. High horizontal shear strength between the casing concrete and the steel section is needed to introduce prestress to the concrete section in the form of preflex beams.In this paper, experiments on the evaluation of the static strength of horseshoe connectors and bar connectors were conducted and the effects of bonds were also considered. Based on the test results, current design codes were estimated and more general design guidelines that consider the design concept of Eurocode were proposed for the connectors. A strength evaluation according to failure and compared with the test results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2407-2414
• /
• 1999

This paper introduces the concept of warped discrete cosine transform (WDCT) and an image compression algorithm based on the WDCT. The proposed WDCT is a cascade connection of a conventional DCT and all-pass filters whose parameters can be adjusted to provide frequency warping. In the proposed image compression scheme, the frequency response of the all-pass filter is controlled by a set of parameters with each parameter for a specified frequency range. For each image block, the best parameter is chosen from the set and is sent to the decoder as a side information along with the result of corresponding WDCT computation. For actual implementation, the combination of the all-pass IIR filters and the DCT can be viewed as a cascade of a warping matrix and the DCT matrix, or as a filter bank which is obtained by warping the frequency response of the DCT filter bank. Hence, the WDCT can be implemented by a single matrix computation like the DCT. The WDCT based compression, outperforms the DCT based compression, for high bit rate applications and for images with high frequency components.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.353-358
• /
• 2005

The purpose of this study is to implement concept of public to passenger ship route to promote benefits and adopt competition principle among ship companies to elevate business efficiency. As of year 2005, passenger ships operate in 106 routes departing from 10 harbors including Mokpo, Masan, and Inchonto provide transportation system to island residents. Contrast to other public transportation systems excluding some tourism routes, this essential passenger ship are unable to fulfill various customer services to the passengers due to stagnation or declination. In addition, route adjustment and flexible passenger ship operation are not expected due to private property right of the route. Therefore, establishment of public transportation system for remote island route is initiated for the connection between cities and islands, boost travel industry of island economy, and balanced growth oh the nation.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.351-356
• /
• 2018

The aim of this study is to propose guidelines for bus-stop information design that is more congested with the advent of U-Shelter, via case studies and focus group interviews. First, the literature research explored the concept of information design and correlation of information design and route map. Second, raising problems and consider improvement plans through case study in korea, overseas. Finally, current information design was evaluated and user's requests were derived through focus group interview. The current information design had problems with lack of priority, information overlaying, and hard recognition. Priority shall be selected by bus route, direction of bus, arrival time, interval, and operating time, and information overlay can be reduced into one. Also visualize the connection and direction between the lines using schematic and two-dimensional lines and shapes for recognition. Through this study, it will be used as a reference material to help improve and develop the bus-stop information design.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.97-103
• /
• 2004

Most of the columns in centrally braced steel frame buildings are usually designed as the gravity columns to reduce connection cost. For a rational seismic performance evaluation of centrally braced steel frame buildings, it is important to properly incorporate in the analysis  the P-${\Delta}$ effects arising from the gravity columns. An effective scheme for the P-${\Delta}$ effects modeling due to the gravity columns was illustrated based on the concept of fictitious leaning column. Seismic performance evaluation of inverted V braced steel frames with or without P-${\Delta}$ effects modeling was conducted by following the FEMA 273 NSP (Nonlinear Static Procedure). The problem in estimating dynamic P-${\Delta}$ modification factor (C3) in FEMA 273 was discussed. The results of this study indicated that the P-${\Delta}$ effects should be included in the seismic performance evaluation of centrally braced steel frames. This study also showed that the inverted V braced frames, retrofitted by applying the tie bars to redistribute the inelastic demand over the height of the building, exhibit significantly improved seismic performance.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.691-706
• /
• 2004

The paper presents shear lag parameters for beam-to-column connections in steel box piers. Previous researches have analyzed beam-to-column connections in steel piers using a shear lag parameter ${\eta}_o$ obtained from a simple beam model, which is not based on a reasonable design assumption. Instead, the current paper proposes a cantilever beam model and has proved the effectiveness through theoretical and experimental studies. The paper examines the inaccuracy of the previous researches by estimating the effective width, the width-span length ratio L/b, and the sectional area ratio S of a cantilever beam. Two different shear lag parameters are defined using the cantilever model and the results are compared each other. The first type of shear lag parameter ${\eta}_c$ of a cantilever beam is derived using additional moments from various stress distribution functions while the other shear lag parameter ${\eta}_{eff}$ of a cantilever beam is defined based on the concept of the effective width. An evaluation method for shear lag stresses has been investigated by comparing analytical stresses with test results. Through the study, it could be observed that the shear lag parameter ${\eta}_{eff}$ agrees with ${\eta}_c$ obtained from the $2^{nd}$ order stress distribution function. Also, it could be observed that the shear lag parameter ${\eta}_c$ using the $4^{th}$ order stress distribution function almost converges to the upper bound of test results.

• Journal of Digital Convergence
• /
• v.18 no.7
• /
• pp.21-29
• /
• 2020

This study aims to explore the characteristics of platform for social service delivery and the electronic voucher system as an instrument for the delivery. The paper discusses the concept and characteristics of platform and reviews the factors by which firms migrate to platform. Social service e-vouchers are an example of a government platform that pays e-vouchers to consumers and gives them the choice of services. Then it analyzes the case of platform establishment to deliver social services. The demand on welfare services has changed with demographic structure. The change in demand requires innovation in the social service delivery system and adoption of strategies to move to the platform. Factors that enabled the social service delivery platform to build both demand and supply sides include access to employment policies, industrial connection, workforce training, and requirements for social service eligibilities.

• 재활복지
• /
• v.22 no.4
• /
• pp.123-152
• /
• 2018

This article tried to understand roles of lifelong education for people with disabilities among revised lifelong education act and to search how rehabilitation counselor attend to the area of lifelong education for people with disabilities and connect. And this article reviewed literatures on significance of act revision and carried out FGI with seven experts. The result was as follows as. First, responsibility of nation on lifelong education for people with disabilities was emphasized after act revision and was extended. Second, the roles of national lifelong educational promotion center for people with disabilities was reinforced and extended possibility of attendance and connection. Third, the result of deep interview between experts appeared as necessity of reestablishment about concept. lifelong education support necessity by disability area, restructure and support of work and methods exploration for coexistence. In conclusion, the methods for coexistence are need because vocational rehabilitation and lifelong education for people with disabilities are essential for adults with disabilities.

• Journal of the Korean Society for information Management
• /
• v.40 no.2
• /
• pp.263-282
• /
• 2023

The purpose of this study is to understand the current status of AI literacy education for users of Korean university libraries and the perception and justification of AI literacy education in university libraries in relation to AI literacy, which is emerging as a key capability in the changing intelligent information society. To this end, this study analyzed the change in the concept of AI literacy and the self-awareness of AI literacy, including generative AI by students who are university library users. As a result of the analysis, positive responses were mainly confirmed in the case of willingness to take AI literacy education and generative AI literacy education in university libraries, and this study suggests that AI literacy education in university essential curriculum is conducted in connection with essential basic education.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.447-456
• /
• 2012

In space design or form design step, recognized necessity of digital design practical use. Also, deduced systematized analysis method that can use various function of CAD system actively. These method can promote the practical use because third dimensional digital design escapes plan and design process in concept that get presentation result after is completed, establishes role of effective and systematic digital design at planning and design of space or form. This uses by a design tool that ease designer's judgment and space and form analysis in architectural planning and design process that third dimension digital design is not part by a simplicity design tool. Share and takes advantage of digital design process method that is deduced in this study, need continuance of connection study for more effective and systematic digital design methodology deduction. Need public ownership of teaching material development and teaching method that can deliver extended third dimension digital design process.