• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.75-80
• /
• 2003

Most of the control point surveying use a triangulation point and a bench mark with Total Station and Level. nowadays, the research is being accomplished for practical use of GPS. but In this study the optimum time and the optimum occupation time are analyzed, so as to examine possibility of the control point surveying that use GPS continuous station data of National Geography Institute. Also, The efficient surveying methods that compare the result of data that processed using broadcast ephemeris with the result of data that processed using precise ephemeris. As a result of that, Error feature analysis of the control point surveying in connection with GPS continuous observation will provide us estimation of errors and efficient topography information acquisition

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1847-1852
• /
• 2004

This article provides the connection between feedback stabilization and interpolation conditions for n-D linear systems (n > 1). In addition to internal stability, if one demands performance as a design goal, then there results an n-D matrix Nevanlinna-Pick interpolation problem. Application of recent work on Nevanlinna-Pick interpolation on the polydisk yields a solution of the problem for the 2-D case. The same analysis applies in the n-D case (n > 2), but leads to solutions which are contractive in a norm (the "Schur-Agler norm") somewhat stronger than the $H^{\infty}$ norm. This is an analogous version of the connection between the standard $H^{\infty}$ control problem and an interpolation problem of Nevanlinna-Pick type in the classical 1-D linear time-invariant systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.315-318
• /
• 2003

This paper proposes a switching control method applicable to any affine, 2nd order nonlinear system with single input. The key contribution is to develop a control design method which uses a piecewise continuous Lyapunov function non-increasing at every discontinuous point. The proposed design method requires no restrictions except full state availability. To obtain a non-increasing, piecewise continuous Lyapunov function, we change the sign of off-diagonal term s of the positive definite matrix composing the former Lyapunov function according to the sign of the Inter-connection term. And we use the solution of inequalities which guarantee each Lyapunov function is non-increasing at any discontinuous point.

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.312-318
• /
• 2005

This paper presents a compensator for reduction of the reactive lateral current in multiple autonomously controlled uninterruptible power supplies (UPS) connected in parallel. This compensator acts directly on the control equation for voltage amplitude and it provides an improved current distribution especially in the case of parallel connection of UPSs with different output power ratings. Observations show that the original control equation for output voltage amplitude is efficient for voltage regulation but it causes great variation of voltage levels. A compensator with the same structure is added to counterbalance the variation caused by the original control equation. Simulations show promising results with the employment of the proposed compensator. Our simulations are confirmed by experimental results using three UPSs with different output ratings and voltage limiters ($1\%$) connected in parallel under various conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.195-197
• /
• 1998

The large scale industry needs high voltage converters. Therefore series connection of power semiconductor devices is necessary. It is important to prevent a device induced the overvoltage above ratings by proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by control the slope of collector voltage under series connected IGBT turn-off transient. The propose gate control scheme limits the overvoltage by sensing the collector voltage and controlling the gate signal actively. The new series connected IGBT gate driver is made and its validity is verified by the experimental results for series connected IGBT circuit.

• Earthquakes and Structures
• /
• 제4권6호
• /
• pp.649-670
• /
• 2013

It is known that a base-isolated building exhibits a large response to a long-duration, long-period wave and an inter-connected system without base-isolation shows a large response to a pulse-type wave. To compensate for each deficiency, a new hybrid passive control system is investigated in which a base-isolated building is connected to another building (free wall) with oil dampers. It is demonstrated that the present hybrid passive control system is effective both for pulse-type ground motions and long-duration and long-period ground motions and has high redundancy and robustness for a broad range of disturbances.

• 한국지진공학회논문집
• /
• 제22권1호
• /
• pp.23-32
• /
• 2018

In this study, we conducted a shake table test to verify the seismic performance of the paneling system with steel truss composed of bolt connections. The control group was set to the traditional paneling system with steel truss connected by spot welding method. Test results showed that the bolted connection type paneling system has excellent deformation capacity without cracking or brittle fracture of the steel truss connection parts compared to the welding type paneling system. Furthermore, in the bolted connection type, slight damage occurred at the time of occurrence of the same story drift angle as compared with the existing method, it is considered that it has excellent seismic performance. In compliance with the performance-based design recommended for the current code (ASCE 41-13) on non-structural components, it is judged that in the case of the bolted connection type paneling system, it can be applied to all risk category structures without restriction. However, in the case of traditional paneling system with spot welding method, it is considered that it can be applied limitedly.

• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.242-253
• /
• 1994

기존의 ISDN내에서 다자간 접속을 유지하고, 사용자의 요구에 따라 서비스를 제어할 수 있는 기능을 부여하여 다자간 회의형 서비스를 제공할 수 있도록 본 논문 제 1부에서 제안한 서비스노드의 기능 제공을 위해 요구되어지는 접속 제어 및 서비스 제어절차와 메시지에 대핵 정의하였다. 서비스노드에 필요한 접속 제어절차는 기존의 ISDN 가입자 및 국간 공통선 신호 방식 관련 CCITT권고안인 Q.931과 Q.764를 기본으로 다자간 접속을 위한 접속 제어 절차를 부가 하였으며, 요구되는 서비스 제어 기능에 EK라 별도의 서비스 제어 절차를 설정하였다. 이를 위해 필요한 제어 메시지는 Q.931과 Q.763의 메시지 포맷내에서 가입자간 신호를 위해 제공되어지는 영역을 활용하여 구성하였으며, EK라서 기존의 신호 체계에 영향을 미치지 않도록 하였다. 또한 서비스노드와 연동학겨 다자간 접속 서비스를 제공할 수 있는 단말기 구현을 위해 필요한 기능과 구조에 대한 요구사항을 도출하였다.

• 한국컴퓨터정보학회논문지
• /
• 제13권6호
• /
• pp.181-193
• /
• 2008

VNC는 Thin Client 컴퓨팅시스템의 하나로서 RFB(Remote Frame Buffer) 프로토콜을 통하여 서로 다른 플랫폼간의 원격 제어 기능을 지원한다. 그러나 VNC는 협업을 위하여 특별한 기능을 제공하지 않기 때문에 VNC의 원격 제어 기능을 통하여 효율적인 협업을 진행하는 것은 어려운 일이다. 본 논문에서는 오픈소스 VNC인 UltraVNC 서버와 JavaViewer 클라이언트의 확장에 대하여 기술한다. 효과적인 실시간 협업을 지원하기 위하여 확장된 VNC는 협업 서버를 제어하기 위하여 관리자, 작업자, 관람자와 같은 세가지 접근 권한을 제공한다. 관리자는 확장된 JavaViewer에서 새롭게 제공되는 접근 관리 도구를 통하여 권한 관리를 수행할 수 있다. 작업자는 협업서버의 자원을 제어하는 것이 가능하지만, 관람자는 협업서버의 자원을 제어 하는 것은 불가능하며 작업 진행사항을 단지 모니터링할 수 있다. 또한 확장된 VNC는 여러 협업참여자가 간편하게 협업서버에 접속할 수 있도록 원클릭 접속 기능을 제공한다.