• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.110-118
• /
• 2003

본 논문에서는 NG-SDH(Next Generation - Synchronous Digital Hierarchy) 기반 전송 시스템(이하 NG-SDH 시스템)에서 광네트워크 제어방식의 전반적인 절차를 수행하는 연결제어 기능에 대한 설계과정을 기술한다. 여기서 NG-SDH는 물리적인 SDH 링크 단위(STM-1, STM-4, STM-16, STM-64, STM-256 등)로만 연결제어가 가능한 기존의 기술과는 달리 트래픽량의 증감에 따라 VC-3(약 50M) 및 VC-4(약 150M) 단위의 SDH 타임슬롯을 자동으로 연결제어를 수행할 수 있는 차세대 SDH 기술을 의미한다. 이러한 NG-SDH 기반 연결제어 기능을 통해 인그레스 NG-SDH 시스템에서 다양한 SDH 및 이더넷 라인카드들의 트래픽을 프로비젼형(PC, Permanent Connection), 반교환형(SPC, Soft Permanent Connection), 그리고 교환형(SC, Switched Connection) 연결 유형에 따라 적절한 연결 설정이 이루어진다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.47-53
• /
• 2017

In this study, we propose a new control system that effectively utilizes the interaction effect of control force through the connection of stiffness member for seismic performance enhancement of two adjacent structures equipped with active tuned mass damper (ATMD). The efficiency of the proposed control system is verified by comparing with the existing independent control system through the numerical simulations of the 10th- and 12th-story buildings. From the numerical results, it is confirmed that the proposed method can show similar or better control performance even with more economical control capacity than the existing independent control system. Another advantage is that the existing system does not exhibit the adaptive control performance in emergency of failure of one control device, whereas the proposed system can achieve successful adaptive control performance by economically and efficiently utilizing the interacting control effect through the connection member.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2201-2208
• /
• 2014

In this research, the characteristics of Brush-less DC (BLDC) motor in accordance with winding connection method, both Y-connection and D -connection, has been identified with design methodology simply. BLDC motor has been designed for both winding connections, and their torque analysis has been performed considering ideal current source analysis and voltage source analysis with 6-step control. In addition, to reduce torque ripple of BLDC motor, caused by coil inductance, on voltage source analysis with 6-step control, we have proposed suitable control method which is Phase Advance Control. It is verified that the torque ripple has been decreased by virtue of phase advance control, advancing and widening conduction angle of switching, via performance analysis by Finite Element Analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.379-382
• /
• 2001

In this paper, a new enhanced early fair rate allocation(EFRA＋) algorithm is proposed for ATM switches supporting ABR service. The central issue of explicit rate control algorithms for ABR service is the computation of max-min fair rates for every connection. The EFRA＋ inherits the main feature of the EFRA, uses the connection control information during the connection setup to prevent potential congestion in switches, and enhances the computation method of the max-min fair rate.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.876-879
• /
• 2003

Bluetooth is the wireless solution which lay emphasis on Short Range, Low Power, Low Cost using a 2.4GHz frequency hopping. And the wireless interface of digital machinery and the various application studies, which are based on that, is making progress lively. This paper provides "Ethernet Connection for Bluetooth Piconet". Ethernet Connection is usually used in our life and can make the Connection of Internet for Bluetooth Piconet. Therefore, this system forms the basis of "Home or Office Remote Control System".

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.

• 한국컴퓨터정보학회논문지
• /
• 제6권3호
• /
• pp.72-77
• /
• 2001

ATM 트래픽 제어의 다중화 구조에서 셀 도착 프로세스에 대한 가정 없이 실시간 연결수락제어에 대한 트래픽 클래스 관계식을 이용하여 연결수락제어 방법을 제안했다. 트래픽 클래스 관계식은 각 클래스의 요구된 서비스 품질을 보장하기 위해서 기대된 순간 버퍼 요구를 고려한 연결 수락 가능 범위로부터 3개 또는 4개의 일차 부등식에 의해서 구현하였다.

• 정보처리학회논문지C
• /
• 제14C권6호
• /
• pp.525-536
• /
• 2007

차세대 네트워크의 성공적인 추진을 위하여 트래픽 엔지니어링이 보장되는 중앙 집중형 제어 및 관리 기술이 네트워크 제어 플랫폼인 NCP(Network Control Platform)와 서비스 품질을 보장하는 스위치인 QSS(Quality of Service Switch)로 실현되고 있다. 본 논문에서는 NCP와 QSS 사이의 SNMP 인터페이스에서 고속의 연결 관리를 위하여 병렬형 기법과 쓰레드 및 객체 풀을 도입하였다. 연결 관리의 테스트-베드를 구축하여 본 논문에서 도입한 고속화 방안을 실험실 환경에서 확인하였으며, 연결 설정의 지연과 완료율을 측정하여 성능을 비교 및 분석하였다. NCP와 QSS 사이의 SNMP 인터페이스에서 연결 관리의 고속화를 위하여 병렬형 방식과 객체 풀의 사용이 중요한 성능 파라미터임을 확인하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.246-253
• /
• 2013

The Modular Multilevel Converter (MMC) with full bridge cells is available for utility interactive inverter in high voltage line. When it is interconnected with power line, it is possible to control the active power flow in order to supply or charge the power in the line. This research applied the MMC to grid connection system of distributed generator and a power flow control for the MMC is investigated. Theory of power flow between the MMC and the power line is described and control method of power flow and capacitor voltages on arm cells for the MMC are proposed. And effectiveness of the proposed control method is presented by simulation.

• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.174-179
• /
• 1999

In this paper, we propose an optimal algorithm for finding the shortest connection of two kinds of parts to pairs. If total part numbers are of size N, then there are order 2ㆍ(N/2)$^{N}$ possible solutions, of which we want the one that minimizes the energy function. The appropriate dynamic rule and parameters used in network are proposed by a new energy function which is minimized when 3-constraints are satisfied. This dynamic nile has three important parameters, an enhancement variable connected to pairs, a normalized distance term and a time variable. The enhancement variable connected to pairs have to a perfect connection of two kinds of parts to pairs. The normalized distance term get rids of a unstable states caused by the change of total part numbers. And the time variable removes the un-optimal connection in the case of distance constraint and the wrong or not connection of two kinds of parts to pairs. First of all, we review the theoretical basis for Hopfield model and present a new energy function. Then, the connection matrix and the offset bias created by a new energy function and used in dynamic nile are shown. Finally, we show examples through computer simulation with 20, 30 and 40 parts and discuss the stability and feasibility of the resultant solutions for the proposed connection algorithm.m.