• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.64-68
• /
• 2020

In this study, metal copper clad laminate can be prepared using epoxy composite filled with thermally conductive fillers. In order to improve the thermal conductivity of epoxy composites, it is important factor to form conductive networks through appropriate packing of conductive fillers in epoxy composite matrix and to decrease the amount of thermally resistant junctions involving a epoxy composite matrix layer between adjacent filler units. This is because epoxy has a thermal conductivity of only 0.2-0.3W, so in order to maintain high thermal conductivity, thermally conductive fillers are connected to each other, so that the gap between particles can be reduced to reduce thermal resistance. The purpose of this study is to find way to achieve highly thermally conductive in the epoxy composite matrix filled with Al₂O₃ and Boron Nitride(BN) filler by filler loading and uniform dispersion. As a results, the use of Al₂O₃/BN hybrid filler in epoxy matrix was found to be effective in increasing thermal conductivity of epoxy composite matrix due to the enhanced connectivity offered by more continuous thermally conductive pathways and uniform dispersion without interfacial voids in epoxy composite matrix. In addition, surface treatmented s-BN improves the filler dispersion and adhesion between the filler and the epoxy matrix, which can significantly decrease the interfacial thermal resistance and increase the thermal conductivity of epoxy composite matrix.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.174-179
• /
• 1999

In this paper, we propose an optimal algorithm for finding the shortest connection of two kinds of parts to pairs. If total part numbers are of size N, then there are order 2ㆍ(N/2)$^{N}$ possible solutions, of which we want the one that minimizes the energy function. The appropriate dynamic rule and parameters used in network are proposed by a new energy function which is minimized when 3-constraints are satisfied. This dynamic nile has three important parameters, an enhancement variable connected to pairs, a normalized distance term and a time variable. The enhancement variable connected to pairs have to a perfect connection of two kinds of parts to pairs. The normalized distance term get rids of a unstable states caused by the change of total part numbers. And the time variable removes the un-optimal connection in the case of distance constraint and the wrong or not connection of two kinds of parts to pairs. First of all, we review the theoretical basis for Hopfield model and present a new energy function. Then, the connection matrix and the offset bias created by a new energy function and used in dynamic nile are shown. Finally, we show examples through computer simulation with 20, 30 and 40 parts and discuss the stability and feasibility of the resultant solutions for the proposed connection algorithm.m.

• Steel and Composite Structures
• /
• v.16 no.6
• /
• pp.577-593
• /
• 2014

An exact dynamic stiffness method is introduced for investigating the free vibration characteristics of the steel-concrete composite beams consisting of a reinforced concrete slab and a steel beam which are connected by using the stud connectors. The elementary beam theory is used to define the dynamic behaviors of the two beams and the relative transverse deformation of the connectors is included in the formulation. The dynamic stiffness matrix is formulated from the exact analytical solutions of the governing differential equations of the composite beams in undamped free vibration. The application of the derived dynamic stiffness matrix is illustrated to predict the natural frequencies and mode shapes of the steel-concrete composite beams with seven boundary conditions. The present results are compared to the available solutions in the literature whenever possible.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.244-250
• /
• 2003

The aim of this study is fabricating of composite filler metal (CFM) by a combination of selective laser sintering (SLS) of stainless steel powders (RapidSteel $2.0^{TM}$ and liquid phase infiltration of Ag-28 wt.%Cu alloy. Porous stainless steel body with inter-connected pore channels was fabricated by SLS, binder decomposing and densification processes. By the direct contact infiltration, the narrow inter-particle channels of the porous body were completely filled with the Ag-28 wt.%Cu alloy infiltrant. During infiltration, the dissolved elements of Fe, Ni and Cr from the porous body were solved into copper solid solution phases, which consist of eutectic structure of composite metal matrix. The S10C/CFM/S10C joints, which have narrow clearance gaps between them up to 10 micrometers, were joined successfully by self-feeding of filler metal from the matrix of CFM. The CFM kept its original thickness and microstructure after brazing. The tensile strength of brazed specimen was higher than 30 kgf/$mm^2$ and showed a typical ductile fracture mode in the CFM.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.608-619
• /
• 2018

As distributed generation (DG) is connected to grid, there is new node-type occurring in distribution network. An efficient algorithm is proposed in this paper to calculate power flow for weakly meshed distribution network with DGs in different load models. The algorithm respectively establishes mathematical models focusing on the wind power, photovoltaic cell, fuel cell, and gas turbine, wherein the different DGs are respectively equivalent to PQ, PI, PQ (V) and PV node-type. When dealing with PV node, the algorithm adopts reactive power compensation device to correct power, and the reactive power allocation principle is proposed to determine reactive power initial value to improve convergence of the algorithm. In addition, when dealing with the weakly meshed network, the proposed algorithm, which builds path matrix based on loop-analysis and establishes incident matrix of node voltage and injection current, possesses good convergence and strong ability to process the loops. The simulation results in IEEE33 and PG&G69 node distribution networks show that with increase of the number of loops, the algorithm's iteration times will decrease, and its convergence performance is stronger. Clearly, it can be effectively used to solve the problem of power flow calculation for weakly meshed distribution network containing different DGs.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1524-1525
• /
• 2007

A flexible tactile sensor module based on polyimide matrix integrated with sensing elements and pluggable terminals connector was fabricated by polymer micromachining technology for robotic applications. The tactile sensor arrays are composed of $4{\times}4$, $8{\times}8$ and $16{\times}16$ sensing elements connected with pluggable terminals connector, respectively. Especially, both the tactile sensor array and the pluggable terminals are formed in the sensor module during the fabrication process. The fabricated tactile sensor module is measured continuously in the normal force range of $0{\sim}1N$ with tactile sensor auto-evaluation system. The value of resistance is relatively increased linearly with normal force in the overall range. The variation rate of resistance is about 2.0%/N in the range of $0{\sim}0.6N$ and 1.5%/N in the range of $0.6{\sim}1N$. Also, the flexibility of the sensing module is adequate to be placed on any curved surface as cylinder because the matrix consists of polymer and metal thin film.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.449-457
• /
• 2005

A multi-noded cable element allowing sliding at its nodes without frictions was introduced in this paper, and its elastic stiffness matrix was derived. A two-node truss element was briefly summarized and extended to multi-node, cable-truss elements that keep their tension constant but are connected without frictions through several nodes. The element elastic stiffness matrix of the multi-node,cable-truss elements was consistently derived. The steel wales pre-stressed externally in the IPS system were chosen as numerical examples and analyzed under various loading conditions. The cable tensions calculated using the present element were compared with the results of the flexibility method and those using the two-node truss element, respectively.

• Journal of Engineering Education Research
• /
• v.21 no.3
• /
• pp.66-75
• /
• 2018

This paper is the second part of the January 2018 issue of the Korean Society for Engineering Education, The "Equilibrium and Unbalance Analysis of Taegeuk Pattern DNA Matrix Codes," and is an extension of the paper published in the IoT Section of the 2017 Summer Conference in Jeju. In this paper, we have reviewed the history of what is life, and 5G Mobile communication: with IoT followed by recent research on influenza RNA gene mutation and DNA mutation variants, and the insights of Watson and Crick. Inspired by a single Franklin DNA X-ray diffraction photograph, they received the Nobel Prize for the Nature publication of DNA that has three patterns and regular repeatability. Professor MoonHo Lee has solved the three patterns in Diagonal, Left to Right, and Vertical matrices in a 2x2 matrix[CU; AG] and A = T = U = 30% C = G = 20%. We also proposed DNA Watch. This is the Healthcare IoT, which is seen by the DNA Watch on the wrist, the type of Tai Chi pattern of the body, and is immediately connected to the smartphone and delivered to the doctor.

• Applied Microscopy
• /
• v.21 no.2
• /
• pp.39-56
• /
• 1991

The development of notochordal cells of nucleus pulposus was studied with electron microscope in human fetuses ranging from 30 mm to 260 mm crown-rump length. At 30 mm fetus, primitive notochordal cells were large with central nucleus, few organelles, and their cytoplasm usually contained dense glycogen and fine filaments. Notochordal cells at all ages contained bundles of fine filaments of indeterminate nature. One unusual feature of fetal notochordal cells was the consistent presense of rough endoplasmic reticulum surrounding poorly developed mitochondria. At 50 mm fetus, notochordal cells formed dense masses with interdigitating cell membranes connected by a variety of cell to cell junctions. With increasing age, the cell connections became slender threaded cytoplamic extending from cell and enclosed large extracellular space. Chondrocyte-like cells appeared to be separated by large volumes of extracellular matrix. Viable notochordal and condrocyte-like cells existed in specimen from all age. The extracellular spaces were filled with fibrillar and granular material by 90 mm fetus. Necrotic cells were distinguished by loss of their membrane integrity, vacuolization of their organelles, and the presence of dense osmiophilic masses. In adult tissue, notochordal cells became rounded or irregular in shape and developed a pericellular matrix consisting of collagen fibrile, and dense particle. The structure of notochordal cells and their persistance in the nucleus pulposus after fetal life suggested that they may have a significant role in the formation and maintenance of the nucleus pulposus. The presence of Golgi complex and well-developed endoplasmic reticulum in chondrocyte-like cells suggested that they are capable of producing and maintaining the extracellular matrix.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.78-85
• /
• 2004

The non-planned development of the rural area surrounding the Metropolitan area has become a social problem. The land development program until now has an aspect of not combining the spacial plan and the environmental plan. The land use and city development system based on development should change into a form that combines developing the area and conserving the environment. Therefore, this research attempts to compare the results of the overlay analysis and the gravity matrix which are ways to evaluate the value land that has a high environmental conservation value. The research area is the town of Seonggeo-eup, Cheonan City, and the reason for selecting this area is because it is expected to be densely populated as a connected area to the Metropolitan and the development pressure, such as expanding the industrial area, is high due to convenient transportation. The environmental factors used in the research are the relative altitude, incline, age-class, natural degree of the ecology, classification of the land covering and the NDVI, and the research methods used are the overlay analysis of the GIS and the statistical method. The overlay analysis results showed level 1 13.2%, level 2 30.7%, level 3 47.4%, level 4 1.0%, level 5 2.4%, level 6 5.4% and so on. The gravity matrix was classified as level 1 27.0%, level 2 9.3%, level 3 58.2%, level 4 2.4%, level 5 2.3%, level 6 0.9% and so on. These results are more appropriate than current methods for plans that value the environment because the analyzed results of the gravity matrix have a tendency to highly condense the environmentally valuable area. Consequently, if the spacial and environmental plans combine and therefore expand the efficient use of the land in the current state where the nation's concern in environment is getting higher, it is thought that it will contribute highly on the development of the nation's life quality.