• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.463-476
• /
• 2001

To support the mobility, mobile computers are generally equipped with lower capability than desktop PCs or workstations in terms of the size of a display, the processing power of CPU and so on. This may give a rise to limitation in mobile computers of supporting multimedia services such as World Wide Web which users would otherwise fully enjoy in desktop PCs. Approaches to reducing the limitations are distillating original multimedia data or converting them to text. Conventional proxy servers for mobile computer simply send distillated image files with the fixed size regardless of the display size of a target mobile computer. Since the cached data is kept separately for each user, they cannot be shared among users with the same display configuration and thus the proxy server could be overloaded. In this paper, we first classify various mobile computers based on their display capability in terms of display sizes and colors. We propose an enhanced proxy server called Class-based proxy that provides a mobile computer with distillated image files in proportion to its class display capacity. The proposed proxy server allows a mobile computer user to have a homepage view similar to that in PC or Workstation. Mobile computers with the same class share the cached image files, which are distillated appropriately for that class. This helps the proxy server to get higher cache hit ratio with improved efficiency and scalability.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3235-3245
• /
• 1996

A DDFS(Direct Digital Frequency Synthesizer) used in spread spectrum communication systems must need fast switching speed, high resolution(the step size of the synthesizer), small size and low power. The chip has been designed with four parallel sine look-up table to achieve four times throughput of a single DDFS. To achieve a high processing speed DDFS chip, a 24-bit pipelined CMOS technique has been applied to the phase accumulator design. To reduce the size of the ROM, each sine ROM of the DDFS is stored 0-.pi./2 sine wave data by taking advantage of the fact that only one quadrant of the sine needs to be stored, since the sine the sine has symmetric property. And the 8 bit of phase accumulator's output are used as ROM addresses, and the 2 MSBs control the quadrants to synthesis the sine wave. To compensate the spectrum purity ty phase truncation, the DDFS use a noise shaper that structure like a phase accumlator. The system input clock is divided clock, 1/2*clock, and 1/4*clock. and the system use a low frequency(1/4*clock) except MUX block, so reduce the power consumption. A 107MHz DDFS(Direct Digital Frequency Synthesizer) implemented using 0.8.mu.m CMOS gate array technologies is presented. The synthesizer covers a bandwidth from DC to 26.5MHz in steps of 1.48Hz with a switching speed of 0.5.mu.s and a turing latency of 55 clock cycles. The DDFS synthesizes 10 bit sine waveforms with a spectral purity of -65dBc. Power consumption is 276.5mW at 40MHz and 5V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.33-44
• /
• 2011

In this paper, we presents a hybrid on-chip bus architecture based on the AMBA 3.0 AXI protocol for MPSoC with high performance and low power. Among AXI channels, data channels with a lot of traffic are designed by crossbar-switch architecture for massively parallel processing. On the other hand, addressing and write-response channels having a few of traffic is handled by shared-bus architecture due to the overheads of (areas, interconnection wires and power consumption) reduction. In experiments, the comparisons are carried out in terms of time, space and power domains for the verification of proposed hybrid on-chip bus architecture. For $16{\times}16$ bus configuration, the hybrid on-chip bus architecture has almost similar performance in time domain with respect to crossbar on-chip bus architecture, as the masters's latency is differenced about 9% and the total execution time is only about 4%. Furthermore, the hybrid on-chip bus architecture is very effective on the overhead reduction, such as it reduced about 47% of areas, and about 52% of interconnection wires, as well as about 66% of dynamic power consumption. Thus, the presented hybrid on-chip bus architecture is shown to be very effective for the MPSoC interconnection design aiming at high performance and low power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1229-1238
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing) communications system is very attractive for the high data rate wireless transmission. However, it may be distorted in the nonlinear HPA(High Power Amplifier) since OFDM signal has hish PAPR(Peak-to-Average Power Ratio). In this paper, a new method using control tone is studied for reducing the PAPR and we call it PCT(PAPR Control Tone) method. This proposed PCT method is to assign control tones for PAPR reduction at the predefined sub-carriers. After IFFT(Inverse Fast Fourier Transform) and PAPR calculation, the OFDM data signal of the lowest PAPR is selected to transmit. Unlike the conventional method, it can cut down the computational complexity because it does not require the transmission and demodulation process of side information about the phase rotation. Furthermore, if this method is made up in parallel configuration, it can solve the time delay problem so that it can be processed in real time processing. This proposed method is compared with the conventional selected mapping(SLM) technique. We find out the PAPR reduction performance and BER when the number of control tone is 6 and nonlinear HPA is considered.

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.222-226
• /
• 2006

Objective: The aim of this study was to introduce newly developed cooperation group standards of acupuncture needles for single use and to make a contribution to the future development of Korean Industrial Standards (KS) of acupuncture needles for single use. Results and Conclusion: Quality assurance and quality control with high safety profile is one of the most critical issues in medical device manufacturing. Up to now, proper attention has not been paid to this issue with respect to acupuncture needles for single use and their related devices. We, therefore, organized a committee to make guidelines to produce an acupuncture needle with high quality and safety. In the committee, we reviewed the topic from an historical viewpoint, and investigated the current situation of the standardization of acupuncture needles in other developed countries. Finally, we developed the cooperation group standards in advance of development of KS on the acupuncture needles for single use. The standards are composed of 12 sections describing: Scope, Normative references, Definitions, Materials, Configuration, Appearance and Cleanliness, Quality, Sterilization and Safety, Processing of Surface and Coating Material, Test, Packaging, and Labeling. We hope that the standards would be useful guidelines to produce high quality acupuncture needles and play an important role in the development of KS in the future.

• Composites Research
• /
• v.24 no.1
• /
• pp.45-50
• /
• 2011

Transparent and conductive carbon nanotube on polyethylene terephthalate (PET) were prepared by dip-coating method for self-sensing multi-functional nanocomposites. The changes in the electrical and optical properties of CNT coating mainly depended on the number of dip-coating, concentration of CNT solution. Consequently, the surface resistance and transmittance of CNT coating were sensitively controlled by the processing parameters. Surface resistance of CNT coating was measured using four-point method, and surface resistance of coated CNT could be better calculated by using the dual configuration method. Optical transmittance of PET film with CNT coating was evaluated using UV spectrum. Surface properties of coated CNT investigated by wettability test via static and dynamic contact angle measurement were consistent with each other. As dip-coating number increased, surface resistance of coated CNT decreased seriously, whereas the transmittance exhibited little lower due to the thicker CNT networks layer. Interfacial microfailure properties were investigated for CNT and indium tin oxide (ITO) coatings on PET substrates by electrical resistance measurement under cyclic loading fatigue test. CNT with high aspect ratio exhibited no change in surface resistance up to 2000 cyclic loading, whereas ITO with brittle nature showed a linear increase of surface resistance up to 1000 cyclic loading and then exhibited the level-off due to reduced electrical contact points based on occurrence of many micro-cracks.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.41-49
• /
• 2010

This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.605-614
• /
• 2002

Amount of the web traffic web server handles are explosively increasing, which requires that the performance of the web server should be improved for the various web services. Although the analysis for the HTTP traffic with the proper tuning for the web server is essential, the research relevant to the subject are insignificant. In particular, although most of applications are implemented over HTTP 1.1 protocol, the researches mostly deal with the performance evaluation of the HTTP 1.0 protocol. Consequently, the modeling approach and the performance evaluation over HTTP 1.1 protocol have not been well formed. Therefore, basing on the HTTP 1.1 protocol supporting persistent connection, we present an analytical end-to-end tandem queueing model for web server to consider the specific hardware configuration inside web server beginning at accepting the user request until completing the service. we compare various performances between HTTP 1.0 and HTTP 1.1 under the overloading condition, and then analyze the characteristics of the HTTP traffic that include file size requested to web server, the OFF time between file transfers, the frequency of requests, and the temporal locality of requests. Presented model is verified through the comparing the server throughput according to varying requests rate with the real web server. Thereafter, we analyze the performance evaluation of the web server, according to the interrelation between TCP Listen queue size, the number of HTTP threads and the size of the network buffers.