• 제목/요약/키워드: configuration design

검색결과 3,128건 처리시간 0.026초

분리하중에 대한 항공기용 외부연료탱크 구조 건전성 평가 (Evaluation of Structural Integrity of Aircraft External Fuel Tank for Separation Loads)

  • 김현기;김성찬;박민수;안수홍
    • 항공우주시스템공학회지
    • /
    • 제18권1호
    • /
    • pp.64-71
    • /
    • 2024
  • 항공기 외부연료탱크는 항공기의 항속거리를 증가시키는 주요 구성품으로써, 비상시 파일런에서 안정적으로 분리될 수 있어야 된다. 이 때, 외부연료탱크의 핀(fin)과 피벗(pivot)에는 분리하중이 작용하게 되는데, 외부연료탱크의 안정적인 분리를 위해서는 핀과 피벗의 구조 건전성이 입증되어야 한다. 본 연구에서는 항공기로부터 외부연료탱크가 분리 될 때 외부연료탱크의 핀과 피벗의 구조건전성 검증을 위해 수행된 구조시험 결과를 제시하였다. 본문에서는 구조시험에 사용되는 유압 및 하중제어장비, 데이터 획득장치 그리고 공압공급장치로 구성되는 시험구성도를 설명하였고, 각 시험조건에 대한 시험설치와 시험하중 인가계획을 제시하였다. 구조시험 결과, 각 시험조건에서 시험하중과 시험체의 내부압력이 허용 범위 내에서 적절히 제어되는 것으로 파악되었고, 시험체에서도 심각한 구조적 결함이 발생하지 않았음이 확인되었다. 최종적으로, 설계 제한하중과 설계 극한하중에 대한 구조시험을 통해서 본 연구의 항공기용 외부연료탱크 핀과 피벗은 충분한 구조 강도를 보유하고 있음을 확인하였다.

기계화를 전제로 한 산간경사지답경지정리방안에 관한 연구(II) (A Study on the Methodology of Land-Consolidation Sloping Paddies in land Vallry for the Farm-Mechanization (II))

  • 황은
    • 한국농공학회지
    • /
    • 제24권4호
    • /
    • pp.57-68
    • /
    • 1982
  • The paddy fiels slope located in Kangweon province Hwyongsung gun Gonggeun myon Shinchonri was considerably steep and so it was impossible to economically consolidate the field up to date. But for the porpose of farm mechanization, the field (32. 27ha) was consolidated by the auther under the assitance of the Ministry of Agriculture and Fishery and,;the Administration of Kangweon province. This paddy field consolidation was caused by the treatise on "Land-consolidation methods for farm mechanization in the steep-sloped paddy field", of which the auther is the same. The constrution was carried out from September, 1981 to April, 1982. During the 4esign and construction, some Peculiarities were found and discussed. That is, in design, besides the common condititions for a design, some special conditions were considered and written below; (1) The ranges of field slope in this design were 1/100-1/30. (2) Long sides of the land readjustment blocks must be arranged abreast contour line, and so they make the amount of cutting and banking decreased so as to take the maximum advantage of the configuration of the field. (3) In design, the main principles of dividing blocks were written below; i) First of all, long side of a block should be drawn straight abreast a contour line. ii) Long side of a block should arrange abreast contour line and make its length 100-150m, if not, l)reak the side in order to make a bended rectangle. iii) Length of a short side should be determinded within differences of elevation (0.6 -1. 2m) between the two adjacent blocks toward the normal to a contour line. iv) Length of a short side should be above 15m and the ratio of long and short side should be slso kept 1: (4-6). v) A new field surface leveling was determinded from the elevation which produce the least amount of cuttingand banking within the range of 0.6-1. 2m diffe rences of elevation between the two adjacent blocks. vi) In the course of dividing blocks with the same width along the line which was normal to a contour line, all blocks connot keep their shape in a retangle because of steep slope of the field and so on, and so it was also necessory to make some non-retanglar and small blocks such as a trianglar or trapezoidal shape, which was impossible to use some of farm machinery. But because this non-rectanglar and small blocks were divided, larger and many rectanglar blocks can be divided and construction cost can also be lowered. According to the conditions discussed above, the paddy field consolidation project designed and constructed. And the results of this study were obtained as below; (1) Three-forth of total cost of this paddy field consolidation was not construction cost, and these cost consist of land grading (1/4), road and canal construction cost (1/4) and the other cost (1/4) such as surveying or materials and 56 on. (2) The steeper the land slope, the greater cost was assigned for road and canal construction, and than land grading. (3) Curtailment of the road and canal construction cost depended on simplificating their strutures. (4) In the case of the land slopes were low, the land grading cost was high by 1: 1.4 in comparison with the road and canal construction cost, and conversely when the slops were steep, the road and canal construction cost was high by 1 : 5 in compa- rison with the land grading cost. (5) The densities of irrigation canal, drainage canal and trunk and branch road were 150. Sm/ha, 60. im/ha and 17. 4m/ha respectively. The density of irrigation canal of the area was high by 2 times in comparison with the average one of Kangweon Province, and the others were nearly the same. (6) Most farmers (above 85%) knew the effects of paddy field consolidation. The effects are; 1) Improvement of irrigation 2) Improvement of farm management 3) Improvement of transportarion 4) farm mechanization and 5) grouping of the scattered land. And the more farm modernization was accomplished by these projects, the more farmers wanted to live in their land. (7) In spite of the very steep sloped paddy field, the diminution rate of the net farm land caused by consolidation was 7.7% which was nearly the same as the one of Chulweon plain of Kangweon province. Land grading cost was 971, OOOwon/ha which was rather cheap by 13.2% than the one of Ghulweon plain, and unit construction cost was 5, 341, OOOwon/ha (included soil addition) which was also nearly the same as the one of Chulweon plain and FNFIA (The federation of national farmland improvement association).

  • PDF

수소 생산을 위한 Sulfur-Iodine Cycle 분젠반응의 Pilot-Scale 공정 모델 개발 및 공정 최적화 (Design and Optimization of Pilot-Scale Bunsen Process in Sulfur-Iodine (SI) Cycle for Hydrogen Production)

  • 박준규;남기전;허성구;이종규;이인범;유창규
    • Korean Chemical Engineering Research
    • /
    • 제58권2호
    • /
    • pp.235-247
    • /
    • 2020
  • Sulfur-Iodine cycle (SI cycle)은 요오드와 황을 첨가하여 최종적으로 물을 열화학적으로 분해하여 산소와 수소를 생산하는 공정으로 황산분해, 요오드화 수소 분해, 분젠반응 등 세가지 반응들로 이루어져 있다. 분젠 반응은 두가지 공정 중간에 존재하므로 두 반응에 필요한 화학물을 조달하는 역할로 이에 대한 상분리 및 반응기에 대한 분석이 중요하다. 본 연구에서는 50 L/hr 수소를 생산하는 pilot scale의 Sulfur-Iodine Cycle 중 분젠 공정에 대한 모사, 민감도 분석, 민감도 분석을 토대로한 각각 상분리기와 분젠 반응기에 대한 최적 조건을 제시하였다. 열역학 물성치의 계산을 위해 Electrolyte Non-Random Two Liquid (ELECNRTL) model 사용하였다. 모델에 대한 신뢰도 확보를 위해서 실제 pilot scale의 공정 데이터와 검증을 수행하였다. 반응기의 종류를 선정하기 위해 Continuous Stirred Tank Reactor (CSTR)과 Plug Flow Reactor (PFR) 동일한 온도 및 부피 변화에서 SO2 전환율을 비교하였다. 상분리기 선정을 위해 3상 분리 시스템(기체-액체-액체)과 액체-기체 분리 후 액체-액체 구조에서 H2SO4 상과 HIX 상에서의 불순물들을 비교하였다. PFR에서 온도, 지름, 길이를 결정 변수로 SO2 전환율을 최대화 하기 위한 최적화를 수행하였는데, 온도 121 ℃와 PFR의 지름이 0.20 m 및 길이 7.6 m 일 때 SO2 전환율이 98% 최적 결과임을 확인하였다. 기존 pilot scale과 동일한 운전 조건 하에 PFR의 지름 3/8 inch, 길이 3.0 m, 120 ℃ 일 때 인입 몰량인 I2 및 H2O를 결정 변수로 SO2 전환율에 대한 최적화를 수행하였을 때, SO2 전환율이 10% 일때 H2O 및 I2 의 인입 몰량은 각각 17%와 22%로 감소하였다. 앞선 조업 조건 최적화 조건 (121 ℃, 지름 0.20 m, 길이: 7.6 m) 경우에는 SO2 전환율이 98% 일 때 H2O가 1% 그리고 I2가 7% 감소하였다. 상분리기에서 HIX 상내 H2SO4 최소화하는 목적함수에서 그에 상응하는 온도, I2와 H2O를 결정 변수로 설정하였을 때, H2O 몰량이 기존공정보다 17% 감소하고 I2 몰량이 24% 감소하였을 때 최소 불순물이 생성하였다.

미국 초기국가시대 전환기 정원의 특성 - 파커 정원, 마운트 버논, 몬티첼로 분석을 중심으로 - (The Characteristics of Transitional Garden in The Early National Period in America - Focused on the analysis of Paca's Garden, Mount Vernon and Monticello -)

  • 백난영;이종성;김현
    • 한국전통조경학회지
    • /
    • 제32권4호
    • /
    • pp.132-142
    • /
    • 2014
  • 본 연구는 영국 낭만주의 정원과 구별되는 미국 낭만주의 정원의 특성을 밝히기 위한 초기 연구로, 미국 초기 국가시대 영국의 낭만주의 정원이 처음 도입되기 시작하여 전환기 정원으로 언급되고 있는 파커정원, 마운트 버논과 몬티첼로 정원을 분석하였다. 분석은 문헌을 통해 시대적 배경, 정원을 조성한 인물, 정형식 정원과 자연주의 정원의 특성 등을 조사하였고, 문헌고찰과 현장답사를 통해 수집된 자료를 중심으로 각 대상지의 공간구조 원리와 정원요소를 중심으로 분석하였다. 공간구조 원리는 직선과 곡선, 노단과 구릉, 가시적 축과 비가시적 축, 대칭과 비대칭, 원근법과 사원근법을 분석인자로 하였다. 분석결과 각 정원은 초기국가 전시대인 식민지 시대 정원에서 보여지는 정형식 정원과 달리 자연주의 정원 즉, 비정형식 정원(영국 자연주의 정원) 양식이 공존하였다. 즉, 파카정원은 정형식 정원과 자연주의 정원이 각각의 공간에 계획되어 각각의 공간에 양식적 특성이 잘 나타나고 있었으나 정형식 정원에서 중심축의 계획에 있어서 거주지의 축과 정원의 축이 일치하지 않아 기존의 정형식 정원의 틀에서 벗어났음을 알 수 있었다. 이러한 현상과 한 정원 내에 자연주의적 정원이 공존 한다는 사실은 미국 초기 국가시대에 계획되어졌던 정형식 정원 양식이 다른 양식으로 대체된 것을 입증한다. 마운트 버논 정원은 파커정원에서와 같이 각각 다른 공간으로 나뉘어 계획된 것이 아니라 하나의 정원에 두 가지 양식이 서로 조화롭게 혼합되어 계획되어졌다. 구불구불한 산책로가 도입되었으나 중심축에 의한 좌우 대칭을 이루게 하였으며, 동일한 식재를 통해 대칭 등 정형적 계획이 동시에 고려된 것으로 나타났다. 반면 구릉의 테라스, 사원근법을 통한 공간계획 등을 통해 본격적으로 자연주의적 양식이 미국 정원에 정착하고 있음을 알 수 있었다. 몬티첼로의 분석결과 자연주의 정원의 대표적 특성인 구불구불한 산책로, 장식농장, 곡선의 화단과 사원근법 등의 원리로 공간이 계획되어 졌으며, 곡선의 화단, 숲과 덤불 형태의 식재 등 정형식 정원의 모습은 거의 찾아 볼 수 없는 영국에서 도입된 자연주의 정원의 특성이 완벽하게 재현된 것을 알 수 있었다.

강 사장교 가설 중 임시 제진방법에 대한 풍동실험 연구 (Wind Tunnel Aeroelastic Studies of Steel Cable-stayed Bridge with Wind Cable and Temporary Support)

  • 조재영;심종한;이학은;권오훈
    • 한국강구조학회 논문집
    • /
    • 제18권1호
    • /
    • pp.33-45
    • /
    • 2006
  • 일반적으로 사장교와 같은 장대교량은 완성 후에 비하여 시공 중 바람에 흔들리기 쉬어 내풍 안정성 문제가 발생하는 경우가 많다. 완공상태에서 충분한 내풍안정성을 확보하고 있더라도 시공단계에서는 설계풍속 이하에서 플러터 등의 공기역학적 진동현상 이 발생하는 경우가 많기 때문에 가설공법이 결정되면 반드시 풍동실험을 능한 적절한 제진 대책 안을 입안해 두어야 한다. 본 연구에서는 가설단계를 고려한 3차원 전교모형실험을 통하여 주경간이 500m인 사장교의 공기역학적 거동을 살펴보았다. 작업 중에 안정성 확보가 중요한 밸런스드 캔틸레버 상태인 가설단계 50% 에서 내풍케이블 및 가설벤트를 이용한 4가지 제진 대책방안을 수립하여 각각에 대하여 내풍 안정성을 검토하였다. 각 설치방안 별 제진효과를 서로 비교 분석하여 검토 범위 내에서 사장교 시공 중 가장 효율적인 임시 제진방안을 제시하였다. 추가적으로 밸런스드 캔틸레버 상태와의 내풍안정성을 비교하기 위하여 완성계와 제진 대책이 없는 주경간 폐합전의 프리캔틸레버 상태에 대하여 살펴보았다.

A Color Analysis on Working Clothing in Domestic Machine and Heavy Industry

  • Park, Hye-Won;Bae, Hyun-Sook;Park, Jin-Ah;Kim, Jie-Kwan
    • 패션비즈니스
    • /
    • 제13권6호
    • /
    • pp.61-75
    • /
    • 2009
  • The objective of this research is to the enhance the color function of work clothing : to research and analyze the hue and tone of work clothing colors to be used for machinery and heavy industries in national industrial complexes, Through this research, the color using problems which related with safety workers will be revealed. For this project, total 42 sets of work suits were sampled from 12 different companies in the machinery and construction industries in the national industrial complexes of Gyeongsang Namdo Province and 16 sets of work suits currently being sold in the market. The collected work suits samples were classified according to item types and design. Color measurements were taken thus: After calibration according to ASTM D1729 specifications of standardized configuration settings to match standardized luminous source D65(Daylight 6500K) in color cabinet BOTECK SuperLight-VI, the RGB values of the work suits were calculated using PANTONE Color Cue TX. The RGB values of the colors thus derived were converted into V/C values using the Munsell Conversion 9.0.6 and analyzed with Munsell's 10-color system and PCCS. The results were presented according to Munsell's color wheel and color and brightness distributions were expressed in table form, as well as presented as a tone map. Following analysis, color hue distribution was found to be concentrated around PB, and brightness distribution toward the low end and mid range of the scale. Saturation values were distributed mostly around the low end of the scale. Following color tone analysis according to PCCS, it became apparent that colors were mainly distributed around dkg, ltg, and g, at low- and mid-brightness and low-saturation. Therefore, it may be concluded that colors used in work suits in the machinery and heavy industries are mainly cool colors, at low- and mid-brightness and low saturation. It is conjectured that such colors were applied uniformly in the workplace in order to serve certain functions, such as concealment of stains and contamination. Therefore, it follows that the utilization of colors, among other functions served by working clothings, must be taken into consideration in order to enhance safety and efficiency.

필터와 트랜스포머를 이용한 투명한 보안기반의 설계 및 구현 (Design and Implementation of a Transparent Security Infrastructure using Filter and Transformer)

  • 김용민;이도헌;노봉남;최락만;인소란
    • 한국정보처리학회논문지
    • /
    • 제5권4호
    • /
    • pp.975-983
    • /
    • 1998
  • 최근의 정보통신 환경은 다양한 시스템 및 응용서비스를 지원하는 개방형 분산처리 환경으로 변모하고 있으며, 또한 상속 및 캡슐화, 재사용 등의 다양한 장점을 제공하는 객체지향 기법을 이용한 응용의 개발이 이루어지고 있다. 이러한 이용의 증대는 외부의 보안 위협에 최약한 네트워크 환경에 안전한 정보 교환을 위한 대책을 필요로 한다. 본 논문에서는 분산 객체환경에서 응용의 안전성을 위하여 CORBA의 보안서비스 규격에 기반하여 인증, 보안설정, 접근제어, 보안정보관리의 기능을 갖는 투명한 보안 기반구조를 설계 및 구현하였다. 보안 기반구조는 사용자 인증정보, 데이터 암호화 및 무결성을 위한 키 분배 등을 지원하기 위한 외부 보안서비스로서 SESAME V4를 이용하였다. 또한 응용의 요청에 대한 투명한 보안 서비스를 지원하기 위하여 객체요청중개자(Object Request Broker: ORB)와 인터페이스를 지원하는 필터(filter)와 트랜스포머(transformer)의 기능을 이용하였다. 필터는 메시지의 전송 및 수신 전후에 파라미터 및 메소드를 삽입 또는 제거 할 수 있으며, 트랜스포머는 메시지의 전송전 및 수신후에 암호화 및 복호화를 위해 바이트 스트림에 직접 접근할 수 이것은 CORBA에서 정의한 안전한 객체요청중개자(secure ORB)의 접근제어 및 안전한 호출 인터셉터를 필터와 트랜스포머를 이용하여 구현한 것이다.

  • PDF

여드름 치료를 위한 PWM 기반 광 조사 시스템 설계 (Design of PWM-Based Photo Irradiation System for Acne Treatment)

  • 김창수;임현수
    • 한국방사선학회논문지
    • /
    • 제6권3호
    • /
    • pp.207-215
    • /
    • 2012
  • 광 역학치료(Photodynamic therapy: PDT) 중 하나인 기존의 LED 광 조사는 연속파(Continuous wave: C.W) 방식의 635 nm 파장으로 여드름 치유에 가장 많이 사용되어 왔으나, 이 방식은 에너지효율이 낮고 생체조직에 열이 많이 발생하여 개선의 방안이 필요했다. 본 논문에서는 에너지효율을 높이고 여드름 치료를 위하여 생체조직에서의 열적 파괴현상을 방지하기위해 PWM(펄스 폭 변조: Pulse Width Modulation)을 활용한 여드름 치료용 LED 광 조사장치를 설계하였다. 시스템 구성은 크게 Timer 모듈, PWM 모듈, 광학전달 장치로 크게 세구성하여 설계하였으며, 여드름 치료를 위한 피부 투과 깊이를 높이기 위하여 광학전달 장치는 660 nm 파장의 1 W LED를 사용하였다. PWM 제어를 이용하여 발생된 주파수와 파형을 확인하고, 660 nm LED의 출력에너지 및 생체조직의 표면온도를 확인하여 안정적인 에너지출력과 생체조직의 안정성에 대해 평가하였다. 그 결과 여드름 치료를 위한 660 nm 파장의 1 W LED 광 에너지를 얻기 위하여 C.W 방식으로 사용하였을 경우 전력손실이 높고 생체조직에서의 열적 파괴현상을 보였으나, PWM 방식을 구현함으로써 펄스 폭 변조를 통하여 LED의 전력소모를 낮추었고, 생체조직의 열적 파괴현상이 나타나지 않아 여드름 치료를 위해 사용할 경우 C.W 방식보다 PWM 방식이 더 안전하고 효과적일 것으로 사료된다.

액티브 광케이블용 4-채널 2.5-Gb/s/ch CMOS 광 수신기 어레이 (4-Channel 2.5-Gb/s/ch CMOS Optical Receiver Array for Active Optical HDMI Cables)

  • 이진주;신지혜;박성민
    • 대한전자공학회논문지SD
    • /
    • 제49권8호
    • /
    • pp.22-26
    • /
    • 2012
  • 본 논문에서는 0.18um CMOS(1P4M) 공정을 이용하여 HDMI용 액티브 광케이블에 적합한 채널당 2.5-Gb/s의 동작 속도를 갖는 광 수신기를 구현하였다. 광 수신기는 차동 증폭구조를 가지는 트랜스임피던스 증폭기, 5개의 증폭단을 갖는 리미팅 증폭기, 출력 버퍼단으로 구성된다. 트랜스임피던스 증폭기는 피드백 저항을 가진 인버터 입력구조로 구현함으로써 낮은 잡음지수와 작은 전력소모를 갖도록 설계하였다. 연이은 차동구조 증폭기 및 출력 버퍼단을 통해 전체 전압이득을 증가하였고, 리미팅 증폭단과의 연동을 용이하게 했다. 리미팅 증폭기는 다섯 단의 증폭단과 출력 버퍼단, 옵셋 제거 회로단으로 이루어져 있다. 시뮬레이션 결과, 제안한 광 수신기는 $91dB{\Omega}$ 트랜스임피던스 이득, 1.55 GHz 대역폭(입력단 0.32 pF의 포토다이오드 커패시턴스 포함), 16 pA/sqrt(Hz) 평균 잡음 전류 스펙트럼 밀도, 및 -21.6 dBm 민감도 ($10^{-12}$ BER)를 갖는다. 또한, DC 시뮬레이션 결과, 1.8-V의 전원전압에서 총 40 mW의 전력을 소모한다. 제작한 칩은 패드를 포함하여 $1.35{\times}2.46mm^2$의 면적을 갖는다. optical eye-diagram 측정 결과, 2.5-Gb/s 동작속도에서 크고 깨끗한 eye-diagram을 보인다.

해양레저 산업의 통합 정보 시스템 구축에 관한 연구 (A Study on Integrated Information System for Marine Leisure Industry)

  • 김용섭;김대진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제16권1호
    • /
    • pp.17-24
    • /
    • 2013
  • 해양레저 산업의 후발주자인 국내 해양레저 산업이 국내 시장 및 세계시장에 경쟁력을 가지기 위해서는 기획, 설계, 계획과 준비 등 제품 개발 및 제조의 각종 업무에 소요되는 시간과 비용을 단축시켜 높은 수준의 시장 적응력을 확보해야 한다. 위 사항들을 만족하기 위해서는 해양레저 산업 전반을 관리 할 수 있는 통합 시스템 구축이 절대 적으로 필요한 상황이다. 유관 산업 시스템간의 유기적 연결고리를 찾아서 요구되는 통합 정보를 확보하고 이를 단순 순차적 정보의 흐름이 아닌 통합적 정보 흐름과 객체 지향적 정보 분류체계를 확보하는 것이 주요 연구 핵심 사안이다. 이를 위하여 다른 유사 산업에서 실재 정보 체계를 활용한 사례 및 산업생산에 적용된 제품수명주기관리(PLM), 제품 데이터 관리(PDM), 가상 생산(DM)과 같은 방법론을 검토 하고 이를 구성 및 적용하여 실질적으로 활용되고 있는 정보 체계 및 작업분류체계(WBS)의 사례를 연구하여 비교 한다. 이를 통하여 해양레저산업을 위한 기본적인 작업분류체계 구성을 추진하며 실재 업체에서 현재 활용중인 정보를 입력, 대입을 통하여 실증적으로 검증하고 해양 레저 산업의 고유한 영역을 추가하여 해양레저 작업 분류 체계(MLWBS)를 완성한다. 본 해양레저 작업 분류 체계를 바탕으로 여러 가지 정보체계 및 제품, 설계, 엔지니어링, 생산, 구매, 영업, 마케팅, AS, 고객지원 등에 다양한 형태의 활용이 가능 하도록 할 수 있을 것이다.