• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.13-17
• /
• 2002

In ceramic systems, many components including embedded passives and TRL(transmission line) are used for composition of 3-dimensional circuit. So the exact analysis on this components must be performed. As for the TRL's, material properties including electrical conductivity of metal, loss factor and effective dielectric constant of dielectric material and geometrical factors like roughness of surface, vias, dimension of stripline structure have a large effect on the charactersistics of transmission lines. In this research, effect of material and geometrical factors on the characteristics of stripline structure is analyzed and quantified by simulation and measurement.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2227-2229
• /
• 2000

본 논문에서는 전도성 고분자 및 고체 전해질을 이용한 액추에이터 제작의 기초 자료로서 전도성 고분자의 합성 조건 및 고체 전해질의 종류에 따른 전도도의 변화를 측정하고 해석한다. 전도성 고분자 액추에이터의 동작 특성은 전도성 고분자 및 고체 전해질의 전기적 특성에 의해 많은 영향을 받으며 따라서 전기적 특성의 가장 중요한 요소인 전도도의 측정은 액추에이터 소자의 동작 특성을 해석하기 위해 중요한 의미를 지닌다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1583-1587
• /
• 2009

The four dentate $N_2O_2$ Schiff base ligand of bis(2-hydroxyacetophenone)-1,2-propanediimine (BHAPN) and its manganese (III) complex were synthesized and identified by microanalysis, spectral data ($^1H$ NMR, MS, FT-IR and UV-Visible) and molar conductivity measurement. The mild and efficient homogeneous oxidative decarboxylation of some carboxylic acids by catalytic amount of this manganese (III) complex, using tetrabutylamonium periodate as a mild oxidant in chloroform at room temperature is reported. The catalyst used in this study showed good activity for the decarboxylation of the titled compounds.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.250-253
• /
• 2004

Emphasis has been placed on thin plate fabrication of plain woven carbon fabric reinforced Al matrix composites using liquid pressing process. The composite has potential applications for PDP rear plate. The process is to use the low pressure for infiltration of Al melt into plain woven carbon fabric as the Al melt is pressurized directly. The minimum pressure required for the infiltration was calculated from force balance equation, permeability measurements and compaction behavior of carbon fiber. Also, the melting temperature and the holding time have been optimized. In order to measure coefficient of thermal expansion (CTE) of the composites, the thermal strain measurement using strain gage was performed and the thermal conductivity of the composites was measured using laser flash method. The constituent materials of the composite are PAN type carbon fibers as reinforcements and 6061 Al alloys as matrices.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.3
• /
• pp.106-110
• /
• 2004

The operating condition of the OLED (organic light-emitting diode) is very sensitive to electrode thickness properties. The electrode thickness is a significant issue in the construction of OLEDs because of its transparency, high conductivity and high efficiency as an injector into organic materials. We carried out a systematic study to optimize the electrode thickness conditions in Indiumtin oxide (ITO), Molybdenum (Mo) and Aluminum (Al). Further, we measured electrode thickness under standard conditions [ITO 1500$\AA$, Mo 2600$\AA$, Al 1500$\AA$]. We also evaluated power consumption. In addition, we analyzed substrate uniformity with IVL measurement results. From these results, it is known that the electrode thickness should be optimized in order to accomplish optimal power efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.75-78
• /
• 1994

Organic ultra thin films about 500${\AA}$ in thickness are fabricated by LB(Langmuir-Blodgett) technique and their gas detect properties are investigated. The LB films deposited are made of the specimen named as N-docosyl pyridinium(TCNQ) and the deposition is verified by capacitance conductivity measurement. From the study of gas detect properties with I-V characteristics and UV spectrum we have found that their conductivities were increased about 3 times of magnitude and peaks of UV spectrum were decreased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.83-87
• /
• 2003

Thin films of amorphous carbon (a-C) generally combine high wear resistance with low friction coefficients and a-C films have widespread applications as protective coatings and passivation of electrical circuit and insulating layer. In this work we deposited the amorphous carbon (a-C) films on silicon substrate with a high rate DC magnetron sputtering system. It is obtained parameters on the deposition rate and physical properties of a-C films using a wide range of Ar gas pressure and DC power. The physical properties of the films were analyzed by Nanoindenter and AFM (Atomic Force Microscopy), The electrical properties were investigated by electrical conductivity measurement.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1484-1486
• /
• 2003

본 연구는 항공, 선박, 자동차, 철강, 철도, 건설 산업 등에서 필수적으로 사용되고있는 여러 비자성 금속의 전기전도도에 대하여 4단자 측정방법 및 비접촉 측정방법에 의한 정밀측정원리를 적용하여 전기전도도를 측정한 결과 4단자 측정방법의 경우 ${\pm}$0.1 %이하의 표준편차 범위 내에서 안정된 값을 보였고, 그 결과를 비접촉 측정방법(eddy current원리를 활용한 전기전도도 측정기)으로 측정한 결과와 상호 비교하였으며, 두 측정방식에 따른 전기전도도 측정결과는 최대 1.5 %이내에서 일치 하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.73-78
• /
• 2002

전기전도도 센서와 GPS장치를 연계하여 논 포장에서 실시간으로 전기전도도를 측정하는 기초시험을 실시하였다. 그 결과 아래와 같은 결과를 얻을 수 있었다. 가. 농기포장에서의 전기전도도의 평균값은 4.llmS/m인 반면, 같은 논 포장임에도 불구하고 호시포장에서는 평균값이 17.35mS/m를 나타내었다. 농기포장에서는 전기전도도의 변이계수가 34.66%, 호시포장에서는 13.15%로서 아주 큰 변이를 보였다. 나. 전기전도도 센서와 DGPS장치로부터 취득한 정보를 기반으로 지도를 작성할 수 있었다. Kriging 방법을 이용하여 지도를 작성함으로서 포장내·포장별 전기전도도 값의 공간변이가 존재함을 알 수 있었다. 다. 전기전도도 센서는 포장내·포장별 토양의 전기전도도를 측정하는데 문제점을 발견할 수 없었다. 그러나, 전기전도도 측정에 영향을 미치는 토양의 입자크기, 수분 함량 등의 영향을 고려한 좀 더 많은 연구가 진행되어야 할 것으로 판단되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.498-499
• /
• 2007

금속 비저항의 측정방법은 4단자 방법을 비롯한 van der Pauw 방법, Four-Point Probe(FPP) 방법, eddy current 방법 등이 사용되고 있으며, 시료의 혈상과 크기에 따라서 그 측정방법은 각각 다르다. 본 연구에서는 그 중 4단자 방법에 의한 정밀측정방법과 측정불확도 평가에 관하여 고찰하였다. 4단자 방법은 시료가 바(bar)나 봉(rod) 형상이면 측정이 가능하며, 시료의 정밀가공과 측정기술을 통하여 측정 불확도를 줄일 수 있다.