• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.421-421
• /
• 2012

Graphene has drawn enormous attention owing to its outstanding properties, such as high charge mobility, excellent transparence and mechanical property. Synthesis of Graphene by chemical vapor deposition (CVD) is an attractive way to produce large-scale Graphene on various substrates. However the fatal limitation of CVD process is high temperature requirement(around $1,000^{\circ}C$), at which many substrates such as Al substrate cannot endure. Therefore, we propose plasma enhanced CVD (PECVD) and decrease the temperature to $400^{\circ}C$. Fig. 1 shows the typical structure of RF-PECVD instrument. The quality of Graphene is affected by several variables. Such as plasma power, distance between substrate and electronic coil, flow rate of source gas and growth time. In this study, we investigate the influence of these factors on Graphene synthesis in vacuum condition. And the results were checked by Raman spectra and conductivity measurement.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.504-508
• /
• 2006

Molecular weight of polyaniline is controlled in the range of oligomer to low molecular weight by controlling the ratio of aniline dimer (p-aminodiphenylamine) to monomer. Aniline dimers act as nucleation sites in chain growth during the polymerization of aniline. The molecular weights of polyanilines are estimated by GPS and relative viscosity measurement. The physical and chemical properties of polyanilines with various molecular weights are studied by UV-Vis, FT-IR, and electrical conductivity measurements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.939-945
• /
• 2000

A cylindrical object buried in the lossy half space is reconstructed from the measured scattered fields above the lossy half space. The position, the size and the medium parameters i.e. relative dielectric constants and conductivity of the buried object as well as the medium parameters of the background lossy half space are obtained from the scattered fields by using the iterative inversion method and the optimization hybrid algorithm combining the genetic algorithm and the Levenberg-Marquardt algorithm. Illposedness of the inversion due to the measurement errors in the scattered fields are regularized by filtering out the evanescent modes in the spatial frequency spectrum domain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.393-396
• /
• 1996

The electrical characteristics of stearic acid LB films far the horizontal direction were investigated to develop the gab sensor using LB films. $\pi$ -A isotherm was measured to transfer stearic acid on slide glass substrate and surface pressure for optimal deposition was 25[dyne/cm]. The deposition status of stearic acid LB films was verified by the measurement of capacitance which was increased with the number of layers. The thickness of electrode was estimated about 1000 by the I-V characteristics far the horizontal direction. The Conductivity of stearic acid LB films for horizontal direction was 10$^{-8}$ [S/cm] that mean like semiconductor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.397-400
• /
• 1996

We investigated electric and dielectric properties of MIM device using Maleate Copolymer LB films. The thickness of maleate copolymer LB film by ellipsometry measurements and X-ray diffraction pattern was about 27~30[ ]. The maleate copolymer 13 film have the property of insulator like organic ultra-thin film. The electric conduction was Schottky current measured by I-V characteristics, and the conductivity was 10$^{-15}$ ~10$^{-14}$ [S/cm]. Dielectric constant was about 5.0~6.0 by various measurement: I-V, frequency-depenent dielectric properties. Schottky barrier was about 0.9 ~1.0(eV). By relation between log I and 1/T, activation energy baa 0.74(eV). Frequency-depenent dielectric properties wart orientational polarization by the dipole.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.92-97
• /
• 2011

Nowdays the most critical problem is global warming and the most important reason is the high emition of carbondioxide. 23% of the use of carbondioxide is used in building and decreasing the use of it is very important. One of the biggest factor that can decrease the use of energy is developing the heat conducting ratio of the materials we use in building. Heat conducting ratio is the important factor in the use of reducing energy comsumation. In this research, there are methods about how to measure the heat conducting ratio, and the existing the representing measuring method which is Heat Flow Meter HFM 436, Laser Flash Analysis and find out about the TCi of the new method C-Therm and compare the results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.290-290
• /
• 2011

In this study Diamond-like carbon (DLC) films were deposited on p-type Si substrates using a Radio-Frequency magnetron Sputtering system. The DLC film was deposited by bombarding graphite target with a N2/Ar plasma mixture with various conditions: substrate, pressure, deposition time, temperature of substrate, power and ratio of gas mixture. The effect on the conduction and hardness of DLC thin films were investigated. The conduction of DLC films were measured by I-V measurement. In addition, Raman analysis was performed to study the chemical bonding structure. The hardness was measured by Nano indentation. Atomic Force Microscopy was used for determined surface morphology of DLC film.

• Korean Journal of Materials Research
• /
• v.16 no.8
• /
• pp.503-510
• /
• 2006

The measurement of specific gases is based on the reversible conductivity change of sensing materials in semiconductor type gas sensors. For an application as gas sensors of high sensitivity, porous $SnO_2$ films have been fabricated by anodizing of pure Sn foil in oxalic acid and characteristics of anodic tin oxide films have been investigated. Pore diameter and distribution were dependent on process conditions such as electrolyte concentration, applied voltage, anodizing temperature, and time. Characteristics of anodic films were explained with current density-time curves.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2967-2972
• /
• 1994

The multiple character of the contact interaction and the collective behavior of elementary microcontacts play a significant role in all the processes occurring in the surface layers, including the failure due to friction and wear. The array of metal spheres compressed between flat plates has been used for simulation of the contact behavior of multiple contact of solids under normal loading. An experimental design has been made providing regular array of the spheres at the same size with different spatial order. Measurement of electrial contact resistance has been made using the equipment providing the adequate accuracy in the range of micro Ohms. The data on electrical contact resistance have been compared with theoretical predictions using the multiple contact model of constriction resistance. The effect of single spots number and array on conductivity of contact has been evaluated.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.3
• /
• pp.283-291
• /
• 1986

An experimental study has been conducted to investigate characteristics of the flow patterns, its transitions and the mean local void fraction obtained from which the probe was traversed diametrically from center to wall of the test section in the vertical upward air-water flow for isothermal condition using the electrical conductivity probe. It has been shown that the probability density function of the mean local void fraction measured statistically from a Fast Fourier Transform becomes a criterion for the flow patterns and the mean local void fraction profile is a highly function of the flow patterns.