• 전자공학회논문지S
• /
• 제36S권3호
• /
• pp.116-123
• /
• 1999

SMPS는 수위칭 소자를 이용하여 효과적으로 전력을 변환시킨다. 여기에서 가장 중요한 파라미터가 스위칭 주파수이다. 스위칭 주파수를 증가시킴에 따라 전원장치의 소형경량화가 가능하다. 그러나 기존 PWM 컨버터에서는 치명적인 단점으로 스위칭 주파수를 증가시킴에 따라 스위칭 손실 및 EMI 문제를 야기한다. 특히 SMPS의 동작은 상당히 큰 di/dt와 dv/dt에 기인한 EMI 전도성 잡음을 발생시킨다. EMI를 감소시키는 방법들로는 고전적이고 고가인 입력필터 혹은 주 전력단에 능동필터를 첨가하는 방법 등이 있어 왔다. 본 논문에서는 DC/DC 포워드 컨버터에 대해 EMI 잡음 발생원 및 잡음 경로를 분석하였다. SMPS에서 방출되는 전도성 잡음은 스위칭 주파수와 그 고주파 주파수에 집중되어 있다. 따라서 본 연구에서는 일정 출력전압에는 큰 영향 없이 스위칭 주파수를 약간씩 변조하게 되는 RPWM 제어를 통하여 전도성 잡음의 주파수 대역을 측면대역으로 분사시키어 전체 첨두치를 저감시키고, 고조파 스펙트럼을 개선할 수 있다.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.56-65
• /
• 2005

이 논문은 군 쉘터(shelter)내부의 전자기기용 전원부에 사용되는 고성능 전원용 광대역 EMI 필터를 제안하였다. 주파수 10 kHz~l GHz의 광대역에서 감쇠량 100 dB를 구현할 수 있는 최적의 EMI 필터를 구현하기 위해 먼저 시뮬레이션을 통해 각 소자의 용량에 대한 특성을 분석하였으며, 이를 기초로 실제 제작을 통해 실험적으로 노이즈 제거 성능을 증명하였다. 이 결과는 군용 쉘터뿐만 아니라 다른 첨단 무기들에 대한 전자파 대응 방호기술의 개발에 도움을 줄 것이다.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.124-129
• /
• 2002

Invertigation electromagnetic emissione of inverter power sources resistance welding existing special aspects of EMI measurements in the field of resistance welding machines resulting from the power rating and operation mode of these machines have to be taken into account. The characteristics of the internal switching processes determined by the behavior of the applied power semiconductors, sunbber circuits and constructional aspect exert a great influence on the conducted emission welding inverters.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.602-609
• /
• 2015

In this paper, a zero current transition (ZCT) double-ended flyback converter is proposed. All of the switching elements act under soft switching conditions and the voltage stress of the main switches is limited to the input voltage due to the innate behavior of the double-ended flyback converter. Providing soft switching conditions and clamping the voltage stress improves the efficiency and electromagnetic compatibility (EMC). The Proposed converter is analyzed in detail and its operating modes are discussed in detail. Experimental results are presented to verify the theoretical predictions. Moreover, the conducted electromagnetic emissions of the proposed ZCT double-ended flyback converter are measured to show another merit of the proposed converter in addition to providing soft switching conditions. The measured electromagnetic interference (EMI) of the proposed converter demonstrates that its EMI is lower than the conventional double-ended flyback converter. Furthermore, two simple and cost effective EMI reduction methods are applied to satisfy the EMC standard.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2159-2161
• /
• 1997

This paper presents the investigations and the reduction methods for EMI in the Elevator(E/L) system. In the large capacity E/L. Power factor controlled IGBT converter is used, so that the conducted EMI level is mostly determined by a high frequency input current. We suggest the low cost EMI countermearsure for E/L system using by a LCL filter ed a low cost noise filter.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.174-177
• /
• 2005

Offline switching power supplies have high voltage and high current switching waveforms that generate Electromagnetic Interference(EMI) in the form of both conducted and radiated emissions. Consequently, all off-line power supplies must be designed to attenuate or suppress EMI emissions below commonly acceptable limits. Electrodeless fluorescent lamp's ballasts have AC/DC flyback converter, so we must control the EMI emissions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1576_1576
• /
• 2009

We present the design of an EMI filter to mitigate the electrical noise from the power supply over a broadband of a few tens of KHz to 18GHz. Admitting that our approach is not apart from the standard technology of EMI filter, it is worth checking out how we can implement the filter that meets the challenging spec. on band of operation. The function of the EMI filter is well-depicted by its performance on the CE(Conducted Emission) and RE(Radiated Emission) suppression through tests which convince us of its application to power supplies of land, water and flying vehicles.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.455-462
• /
• 2003

스위칭 PFC 컨버터는 전력의 질을 향상시킬 뿐 아니라 최대 효율을 얻기 위해 널리 사용된다. 하지만, 스위칭 PFC 컨버터는 심각한 EMI 문제를 발생시킨다. 본 논문에서는 이 문제를 해결하기 위해서 APW 기법과 RPWM 기법을 PFC Boost 컨버터에 적용하여 우수한 결과를 얻었다. 시뮬레이션과 실험 결과를 통해서 에어컨 시스템에서의 개선된 고조파와 저감된 EMI 효과를 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.91-94
• /
• 2002

This paper presents a novel active common-mode EMI filter for the PWM inverter application. The proposed filter is based on the current sensing and compensation circuit and it utilizes a fast transistor amplifier for the current compensation. The amplifier utilizes an isolated low-voltage dc power supply for its biasing and it is possible to construct the active filter independent of the source voltage of the equipment. Thus the proposed active filter can be used in any application regardless of its working voltage. The effectiveness of the proposed circuit is verified by experimental results.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.123-134
• /
• 2016

The evolution of the electro-mechanical impedance (EMI) of a piezoelectricity (PZT) sensor was investigated to determine the setting times of cement paste in this study. The PZT sensor coated with non-conductive acrylic resin was embedded in fresh cement paste and the EMI signatures were continuously monitored. Vicat needle test and semi-adiabatic calorimetry test were also conducted to validate the EMI sensing technique. Significant changes in the EMI resonance peak magnitude and frequency during the setting period were observed and the setting times determined by EMI sensing technique were relevant to those measured by Vicat needle test and semi-adiabatic calorimetry test.