• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.149-157
• /
• 2013

Objectives This study was designed to: (1) investigate the clinical feature of tongue diagnosis, (2) make an observation of significant changes in tongue diagnosis according to the patient's physical condition and laboratory result and (3) identify clinical efficacy of tongue diagnosis. Methods 300 patients' tongue diagnosis results were analyzed and the patients were divided to each group according to the physical condition and laboratory result. Then, chi-square test was performed to assess statistical significance between tongue diagnosis results of each group. Results As a result of analyzing the spread of tongue diagnosis according to the patient's physical condition and laboratory result, 18 groups had statistical significance related to specific tongue color and tongue coating. Conclusions Even if there would be possible misinterpretations in one-to-one match between the tongue diagnosis and certain diseases, we identified that tongue diagnosis results were changed somewhat related to patient's physical condition with some tendency and tongue diagnosis could be used for meaningful clinical diagnostic tool.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.363-369
• /
• 2019

복잡한 회전 기계의 소음 상태 진단을 위한 다양한 연구가 수행되고 있다. 본 연구에서는 진동신호를 이용하여 블로워 모터의 효율적이고 객관적인 소음 상태진단을 위한 지수를 개발하였다. 블로워 모터의 이상 시 가장 흔히 나타나는 소음으로 틱/클릭 소음과 톤 소음이 있다. 발생 원인과 소음 특성에 따라 틱/클릭 소음의 상태 진단에는 시간-주파수 분석법을 그리고 톤 소음 상태 진단에는 주파수 영역에서의 평활화 기법을 이용하였다. 개발한 지수를 이용하여 블로워 모터의 소음 상태 진단을 수행하고 이를 전문가에 의한 진단 결과와 비교하였다. 그 결과 약 95 %의 일치율을 보였다.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.146-153
• /
• 2011

Model based machine condition diagnosis methods are generally using a normal and many failure models which need sufficient data to train the models. However, data, especially for failure modes of interest, is very hard to get in real applications. So their industrial applications are either severely limited or impossible when the failure models cannot be trained. In this paper, continuous hidden Markov model(CHMM) with only a normal model has been suggested as a very promising machine condition diagnosis method which can be easily used for industrial applications. Generally hidden Markov model also uses many pattern models to recognize specific patterns and the recognition results of CHMM show the likelihood trend of models. By observing this likelihood trend of a normal model, it is possible to detect failures. This method has been successively applied to arc weld defect diagnosis. The result shows CHMM's big potential as a machine condition monitoring method.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.31-35
• /
• 2013

The emergency AC power supply system of the nuclear power plant is designed to supply the power to the nuclear power plant at the emergency operating condition. The safety function of the diesel generator at the nuclear power plant is to supply AC electric power to the safety system whenever the preferred AC power supply is unavailable. The reliable operation of onsite standby diesel generator should be ensured by a condition monitoring system designed to maintain, monitor and forecast the reliability level of diesel generator. The purpose of this paper is to improve the existing ultrasonic sensor used for condition diagnosis of engine fuel pump and cylinder head for the accurate diagnosis in actual engine condition of emergency diesel generator(EDG). As a result of this study, we could design and develop much more reliable ultrasonic sensor than existing ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.975-977
• /
• 2005

The generator on-line diagnosis system has been developed. This system monitor the insulation condition of stator winding by on-line measurements of partial discharge and the shorted-turn condition of rotor winding by on-line measurements of slot leakage flux. Sensor, such as SSC(Stator Slot Coupler) and flux probe are used for generator on-line diagnosis.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.562-569
• /
• 2022

기존 운항선박에 적용되어 있는 알람 모니터링 기술은 온도, 압력 등의 데이터 항목을 AMS(Alarm Monitoring System)으로 관리하고 해당 센싱 데이터가 정상 수준 범위를 초과할 경우만 선원에게 알람을 제공한다. 또한 기존 선박의 정비는 PMS(Planned Maintenance System)를 따른다. 이는 장비로부터 측정된 센싱 데이터가 설정범위 이상으로 측정되어 이에 따른 알람을 통해 정비하거나, 대상 기기의 고장 유무에 관계없이 일정 시간 사용 후 해당 부품을 사전에 교체하는 방식으로 운영되고 있다. 하지만 선박 기관운영의 신뢰성과 운항 안전성을 확보하기 위해서는 실시간 상태 모니터링 데이터 기반의 사전적 진단 및 예측이 가능해야 한다. 그러기 위해서 실선 데이터를 종합적으로측정하여 데이터베이스화 하고 이를 선박의 보조기기와 배관의 상태기반 예지보전을 위한 상태 진단 모니터링 시스템을 구현하고자 한다. 특히 반응형 웹 기반으로 선박의 보조기기와 배관 상태 정보를 관리할 수 있도록 하였으며, 선내 개인용 컴퓨터(Personal Computer, PC)에서 보는 용도뿐만 아니라 스마트폰 등 다양한 모바일 기기의 접근 및 활용이 가능하도록 화면과 해상도에 맞춰 최적화된 상태 관리가 가능하도록 하여 업데이트 비용이 적게 들며, 관리 방법도 쉽다. 본 논문에서는 자율운항선박 핵심 기술인 상태기반정비(Condition Based Management, CBM) 기술력을 확보하기 위해 선박의 보조기기 중 펌프와 청정기, 그리고 배관 중 해수 및 스팀 배관의 상태 진단 모니터링을 통해 이상 현상을 파악하고, 이를 통해 융합 분석할 수 있도록 선박 보조기기 및 배관의 성능 진단 및 고장 예측에 활용하여 예방정비 의사결정을 지원하고자 한다.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.285-290
• /
• 2002

Integrated condition monitoring is required to monitor effectively the machine conditions since machine failures could not be monitored accurately by any single measurement parameter. Application of various condition monitoring techniques is therefore preferred in many cases in order to diagnosis the machine condition. However it inevitably requires lots of maintenance cost and sometimes it could be proved to over-maintenance unnecessarily. This could happen especially when one measurement parameter closely correlates to another. Therefore correlation analysis of various monitoring parameters has to be performed to improve the reliability of diagnosis. In this work, Pearson correlation coefficient was used to analyze the correlation between condition monitoring parameters of an over-loaded machine system where the vibration, wear and temperature were monitored simultaneously. The result showed that Pearson correlation coefficient could be regarded as a good measure for evaluating the availability of condition monitoring technology.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.252-259
• /
• 2001

Integrated condition monitoring is required to monitor effectively the machine conditions since machine failures could not be monitored accurately by any single measurement parameter. Application of various condition monitoring techniques is therefore preferred in many cases in order to diagnosis the machine condition. However it inevitably requires lots of maintenance cost and sometimes it could be proved to over-maintenance unnecessarily. This could happen especially when one measurement parameter closely correlates to another. Therefore correlation analysis of various monitoring parameters has to be performed to improve the reliability of diagnosis. In this work, Pearson correlation coefficient was used to analyze the correlation between condition monitoring parameters of an over-loaded machine system where the vibration, wear and temperature were monitored simultaneously. The result showed that Pearson correlation coefficient could be regarded as a good measure for evaluating the availability of condition monitoring technology.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.74-80
• /
• 1998

The morphologies of the wear particles are directly indicative of wear process occuring in the machine. The analysis of wear particle morphology can therefore provide very early detection of a fault and can also ofen facilitate a dignosis. For this work, the neural network was applied to identify friction coefficient through four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) of wear debris generated from the machine. The averages of these parameters were used as inputs to the network. It is shown that collect identification of friction coefficient depends on the ranges of these shape parameters learned. The various kinds of the wear debris had a different pattern characteristics and recognized relation between the friction condition and materials very well by neural network. We discuss how the network determines difference in wear debris feature, and this approach can be applied for machine condition monitoring and fault diagnosis.

• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.101-125
• /
• 1995

The terminology used for oriental medicine has not yet been standardized so far and this might cause the problems in developing theories and clinical research of oriental medicine. To establish scientific backgroupd of oriental medicine, it is required that all the terminology used for oriental medicine should be standardized and unified. For more efficient oriental medical practice, the standardization, unification of the terms and conditions used for diagnosis in oriental medicine should be achieved. The aim of this study are as follows; 1. To provide clear and logical systems for the diagnosis of symptoms and diseases. 2. To provide the theoritical clearmess of oriental medicine and to promote the public facilities for study. 3. To provide ways of idea exchange and understanding between oriental medicine and various biological sciences. 4. To provide practical basis for hospital administration for oriental medicine.