• Journal of the Korean Institute of Navigation
• /
• v.20 no.1
• /
• pp.1-10
• /
• 1996

The assesment of the safety of ship's transit in a curved narrow channel consists of the maneuvering safety determined by the chance of running aground, the maneuvering difficulty determined by ship's workload, and shiphandler's subjective evaluation. In this study, to examine the correlation between shiphandler's subjective evaluation and the maneuvering safety, the real-time and full-mission shiphandling simulator in the Korea Marine Training & Research Institute(KMTRI) was utilized. On the conning bridge of the shiphandling simulator, 50 experienced masters have conducted the modeled vessel of 60, 000 deadweight tonnage along the designed channel under 3 different environmental conditions. It was possible to assess and analyze theoretically the correlation between the shiphandler's subjective evaluation and maneuvering difficulty under each environmental condition by quantifying the data obtained from the tests. The results are as follows: $\circled1$ As the degree of maneuvering difficulty increases, the shiphandler's subjective evaluation increases in the designed channel under the designed environmental condition. $\circled2$ In the straight area, not the bend of the designed channel, maneuvering difficulty increases sharply under the environmental condition of current and wind coming from the stern.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.517-520
• /
• 2005

Cleft lip is a congenital deformity condition with separation of the two sides of the lip and results in nose deformity Evaluation of surgical corrections and outcome assessments in nose deformity resulting from the cleft lip depend mainly on doctor's objective judgment. Development of an objective assessment tool in evaluation of the condition and surgical outcome of cleft lip nose deformity patients will help in advancement and evaluation of surgical techniques of cleft lip. Hence, our study aimed at quantitative assessment of a cleft lip nose deformity condition by comparing following parameters gathered from a photographic image of a cleft lip patient: (1) angle difference between two nostril axis, (2) center of the nostril and distance between two centers, (3) overlapped area of two nostrils and (4) the overlapped area ratio of two nostrils. Assessment results of the nose deformity were determined by statistical analysis of evaluation results from three experienced plastic surgeons. In addition, regression model was developed using correlation relationship and factor analysis of parameters from results of the image analysis

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.163-170
• /
• 2005

Track substructure (ballast, subgrade) should have sufficient strength and uniform stiffness to fully support track superstructure (rail, fastener, sleeper). Vertical support stiffness of track is strongly influenced by the condition of ballast and subgrade layers. Therefore, the evaluation of the condition of track substructure is very important to evaluate the vertical support stiffness of track. This paper proposes the trackbed evaluation system, which is composed of Ground Penetrating Radar (GPR), Portable Ballast Sample. (PBS), and Light Falling Weight Deflectomete. (LFWD), to diagnose track substructure. The laboratory and field tests are performed to evaluate the applicability of the proposed trackbed evaluation system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.460.2-460
• /
• 2001

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.19-26
• /
• 2018

PURPOSES : The main purpose of this study is suggest of field bond strength evaluation method for more objective evaluation method through Evaluation of Bond Strength Properties with changing aspect ratio and temperature. METHODS : The evaluation is laboratory bond strength test. Using the core machine, the pull-off test method ; the bond strength test of interface layer the universal testing machine. RESULTS : As a result of the laboratory bond strength evaluation, it was verified that the bond strength by aspect ratio decreases linearly with increasing aspect ratio and the bond strength properties by temperature change existed at high and low temperature condition relative to odinary temperature condition. CONCLUSIONS : According to the results of laboratory bond strength evaluation, the field bond strength evaluation results suggest applying the proposed correction factor (0.8, 1.0, 1.4, 1.9) according to aspect ratio(0.5, 0.1, 1.5, 2.0), For more objective evaluation of the bond strength, it is analyzed that the evaluation value is within $6{\sim}32^{\circ}C$ and the result can be obtained within 5% of the coefficient of variation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.391-396
• /
• 1998

The concrete structures are hardly ever built under ideal conditions. So many defects may occur for a various reasons such as unsuitable and defective materials, construction methods, poor workmanship, particular structural form and prevailing weather conditions. Some structural form can greatly increase the risk of occurrence of defects. Therefore we investigated the actual condition of the deterioration factors for reinforced concrete apartment, which was composed of 85 apartments with various building ages in different regions with five evaluation the deterioration factors of apartment building to establish the overall evaluation system of deterioration degree for reinforced concrete apartment in Korea.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.332-337
• /
• 2009

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system, regarding Japanese standard JIS B-8122 and international standard organization, ISO-8528, was applied to the system. The evaluation methods, start-test, rapid-load-up and rapid-load-down, etc. were executed at the system, and reasonable results were acquired. The electrical and thermal efficiencies were executed and analyzed at various load conditions. The NOx emission at various load condition was also measured. Finally, the gas engine cogeneration system was installed to a site for actual usage and it was continually operated during more than 6 months as the site condition.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.884-890
• /
• 2004

In this paper, an index for the evaluation of vehicle intake booming noise is developed through a correlation analysis of objective measurement data and subjective evaluation data. First, intake orifice noise is measured at the wide-open test condition. And then, acoustic transfer function between intake orifice noise and interior noise at the steady state condition is estimated. Simultaneously, subjective evaluation was carried out with a ten-scale score by 8 engineers. Next, the correlation analysis between the psycho-acoustic parameters derived from the measured data and the subjective evaluation is performed. The most critical factor was determined and the corresponding index for the intake booming noise is obtained from the multiple factor regression method. At last, the effectiveness of the proposed index is validated.

• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2001

Psychological and physiological effects from simulator sickness could be an important bias factor for sensibility evaluation. The present experiment investigated the effects of simulator sickness on sensibility evaluation in the controlled condition of driving a car for 60 minutes on a constant speed (60km/h) in graphic simulator. The simulator sickness was measured and analysed for every five minutes using their subjective evaluation and physiological signals. Results of the subjective evaluation showed that there was significant difference between rest and driving condition at 10 minutes from the start of driving, and the level of difference was increased linearly with time. The analysis on central and autonomic nervous systems showed the significant difference between rest and driving conditions after 5 minutes from the start of the driving on the parameters $\alpha$/total and $\beta$/total, and increased level of sympathetic nervous system. But there was no significant difference between different time conditions. The results indicates that physiological changes from simulator sickness can be a bias factor in objective evaluation of human sensibility which also, uses physiological signals. That is, the changes on the parameter $\alpha$/total and $\beta$/total, and on activation level of sympathetic nervous system from simulator sickness can be a bias factor for evaluation of the level of pleasantness and tension. Therefore the effort on improving the analysis by minimizing or eliminating the bias factors should be done for better and accurate sensibility evaluation in simulator environments.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.