• Geomechanics and Engineering
• /
• 제36권2호
• /
• pp.145-156
• /
• 2024

The mechanical properties of the concrete-frozen soil interface play a significant role in the stability and service performance of construction projects in cold regions. Current research mainly focuses on the precast concrete-frozen soil interface, with limited consideration for the more realistic cast-in-place concrete-frozen soil interface. The two construction methods result in completely different contact surface morphologies and exhibit significant differences in mechanical properties. Therefore, this study selects silty clay as the research object and conducts direct shear tests on the concrete-frozen soil interface under conditions of initial water content ranging from 12% to 24%, normal stress from 50 kPa to 300 kPa, and freezing temperature of -3℃. The results indicate that (1) both interface shear stress-displacement curves can be divided into three stages: rapid growth of shear stress, softening of shear stress after peak, and residual stability; (2) the peak strength of both interfaces increases initially and then decreases with an increase in water content, while residual strength is relatively less affected by water content; (3) peak strength and residual strength are linearly positively correlated with normal stress, and the strength of ice bonding is less affected by normal stress; (4) the mechanical properties of the cast-in-place concrete-frozen soil interface are significantly better than those of the precast concrete-frozen soil interface. However, when the water content is high, the former's mechanical performance deteriorates much more than the latter, leading to severe strength loss. Therefore, in practical engineering, cast-in-place concrete construction is preferred in cases of higher negative temperatures and lower water content, while precast concrete construction is considered in cases of lower negative temperatures and higher water content. This study provides reference for the construction of frozen soil-structure interface in cold regions and basic data support for improving the stability and service performance of cold region engineering.

• 화약ㆍ발파
• /
• 제32권1호
• /
• pp.1-9
• /
• 2014

외부장약 발파시 부재와 폭약의 이격거리에 따른 절단 및 파괴양상을 확인하기 위하여 강 부재와 콘크리트 부재에 TNT 카트리지 폭약을 이용하여 실험을 하였다. 실험 결과 강 부재나 콘크리트 부재에 대한 파괴 장전공식은 다소 보수적인 것으로 판단되었다. 콘크리트 부재에 비해 강 부재가 폭약 이격거리에 대한 파괴영향이 큰 것으로 판단된다. 강 부재의 경우 표준폭약 이상으로 장전해도 폭약이 부재에서 2cm 이격된 경우 절단되지 않고 구부러짐만 나타났다. 같은 이격에 대하여 콘크리트 블록 부재의 경우 구조물의 파괴를 유도하는데 문제가 없을 것으로 판단된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.185-193
• /
• 1995

The softening behaviors of concrete have been the object of numerous experimental and numerical studies, because the load carrying capacity of cracked concrete structure is not zero. Numerical studies are devoted to the investigation of three-dimensional softening behaviors of concrete on the basis of a viscoplastic theory, which may be able to represent the effects of plasticity and also of rheology. In order to properly describe material behaviors corresponding to different stress levels, two surfaces in stress space are adopted; one is a yield surface, and the other is a failure or bounding surface. When a stress path reaches the failure surface, it is considered that the softening behaviors are initiated as micro-cracks coalesce and are simulated by assuming that the actual strain increments in the post-peak region are less than the equivalent viscoplastic strain increment. The experimental studies and the finite element analyses have been carried out under the displacement control. Numerically simulated results indicate that the model is able to predict the essential characteristics of concrete behaviors such as the non-linearity, stiffness degradation, different behaviors in tension and compression, and specially dilatation under uniaxial compression.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.145-148
• /
• 2008

현재 국제적인 콘크리트설계기준의 동향은 한계상태의 개념을 기본으로 하여 구조물에 요구되는 성능을 중심으로 새로이 한계상태를 정의하려는 노력이 진행되고 있다. 이를 위해서는 구조물의 요구성능을 정의하고 성능수준에 대한 만족도를 측정하는 등의 과제를 해결해야 하는 문제가 놓여있다. 성능을 만족하는 정도를 나타낼 수 있는 지수로는 현재 신뢰도지수가 가장 주목받고 있다. 이 논문에서는 PSC beam을 대상으로 단면력저항계수 및 재료저항계수 체계로 설계를 시행한 후, 여러가지의 서로 다른 저항계수 세트에 대한 신뢰도지수를 각각 구하여 값을 비교하였다. 향후 주어진 목표신뢰도 수준에 부합하는 저항계수 조합을 산정하는 기초 자료로 사용할 수 있다.

• 한국농공학회논문집
• /
• 제65권2호
• /
• pp.47-57
• /
• 2023

The increase of impermeable area ratio is causing hydrologic cycle problems in urban areas and groundwater depletion in rural areas, permeable pavements are getting attention to expand permeable areas. The performance of the permeable concrete block pavement, which is part of the permeable pavement, is greatly affected by the porosity. In addition, the permeability coefficient is a major factor when designing permeable concrete block pavement. Existing porosity and permeability test methods have problems such as uneconomical or poor field applicability. The object of this study was to develop a methodology for evaluating porosity and permeability coefficient using a surface image of a permeable concrete block. Specimens are manufactured with various porosity ranges and porosity and permeability tests are performed. After surface image preprocessing, normalization and binarization methods were compared. Through this, the method with the highest correlation with the lab test result was determined. From the results, the PDR (pore determined ratio) was obtained. Simple linear regression analysis is performed with PDR and lab test results. The results showed a high correlation of R² more than 0.8, and the errors were also low.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.572-575
• /
• 2004

A fundamental study was executed in order to evaluate quantitatively the effect on strength characteristic of concrete or mortar by fly ash. As a result, it was confirmed that the appropriate usage of fly ash is in existence comply with mix condition and characteristic of fly ash. And, we could evaluate the activity factor of fly ash. But, there are many problem in actual application because that the object of this study is only Method(2) out of the evaluation methods of activity factor proposed by CEN. Therefore, it is necessary to keep up an additional study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.621-624
• /
• 2006

This paper presents a novel optimum technique for optimum mix-proportion using database-based prediction model of material properties for an object function or a constraint condition. The proposed technique provides high reliability of results introducing effective region model, which assesses whether the prediction model is effective or not, in optimization process. In order to validate the proposed technique, a genetic algorithm was adopted as a optimum technique, and an artificial neural network was adopted as a prediction model for material properties and as a model for assessing effective region. The mix-proportion obtained from the proposed technique is more reasonable than that obtained from a general optimum technique.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.187-193
• /
• 2001

The object of this research is to evaluate the seismic performance of existing circular reinforced concrete bridge piers by the Quasi-static test. Existing reinforced concrete bridge piers, which were non-seismical]y designed in accordance with the conventional provisions of Korea Highway Design Specification, are needed to rating evaluate seismic performance fur probable earthquake motions in future by developing a seismic analysis computer program with estimation algorithm. This study has been performed to verify the effect of lap spliced longitudinal steel, confinement steel type and confinement steel ratio for the seismic behavior of reinforced concrete bridge piers. Quasi-static test has been done to investigate the physical seismic performance of RC bridge piers, such as displacement ductility, energy absorption, strength degradation etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.247-250
• /
• 2012

As industrialization progresses is rapidly growing, the city of density and temperature is rising successively. It leads to the status of environmental issues. It is needed to develop process of planting concrete block using by Eco-materials for replacing to he existing rooftop light soil that imported. In this study, developing the process of planting lightweight block is researched on using applications of 6 Sigma technique. It makes process object improve standard by using statistical method. Also, there are suggestion that it is optimum mix design conditions and affection of experimental factors in matters of developing planting concrete block for rooftop greening.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.58-67
• /
• 2003

Over the last decade fiber-reinforced polymer (FRP) reinforcement consisting of glass, carbon, or aramid fibers embedded in a resin such as vinyl ester, epoxy, or polyester has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. But reinforcing rebar for concrete made of FRP rebar has linear elastic behavior up to tensile failure. For safety a certain plastic strain and an elongation greater than 3% at maximum load is usually required for steel reinforcement in concrete structures. The same should be required for FRP rebar. Thus, the main object of this study was to develop new type of hybrid FRP rebar Also, this study was evaluated to the mechanical properties of Hybrid FRP rebar. The Manufacture of the hybrid FRP rebar was achieved by pultrusion, and braiding and filament winding techniques. Tensile and interlaminar shear test results of Hybrid FRP rebar can provide its excellent tensile strength-strain behavior and interlaminar stress-strain behavior.