• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.851-858
• /
• 2004

본 연구는 디스크로 콘크리트의 파괴인성을 구하는 경우에, 적절한 디스크의 크기(직경, 두께) 및 노치 길이 비를 제안하기 위해서 다양한 크기의 디스크와 RILEM 3점 휨 보의 파괴인성을 비교하였다. 또한 이렇게 정해진 디스크에 대하여 디스크의 노치 경사를 변화시키는 방법으로 혼합모드 응력확대계수를 조사하였다. 실험에 사용된 콘크리트의 압축강도는 44.9MPa이었으며 모드 I 시험에 사용된 디스크의 직경은 200, 300, 400mm 두께는 75, 100, 125mm, 노치 길이 비 a/R은 0.3, 0.4, 0.5, 0.6이고 혼합모드 시험에 사용된 치수는 직경이 300mm, 두께는100mm 노치 길이 비 a/R은 0.3, 0.4, 0.5, 0.6이었다. 디스크의 응력확대계수는 유한요소해석(FEA), 5개항 근사법, 소균열 근사법, Fowell & Xu의 방법으로 구하고 각각의 결과를 서로 비교하여 해석방법의 타당성을 조사하였다. 모드 I 실험 결과 디스크의 직경 D가 300mm이고 두께 t가 100mm일 때의 파괴인성 $K_{IC}$ 값이 RILEM 3점 휨 시험의 결과에 가장 근접하여 디스크 시험으로 파괴인성치를 쉽게 구할 수 있음을 알 수 있었다. 또한 디스크 시편은 혼합모드 파괴의 연구 및 시험에 유용함을 알 수 있었다.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.25-37
• /
• 1993

본 논문은 강섬유보강 콘크리트의 인성을 평가하기 위하여 비선형 파괴역학 파라메터의 하나인 J적분이 최대하중점 파괴기준이 적용될 때 휨시험으로부터 하중-처짐곡선으로부터 간편하게 사용될 수 있음을 설명하고, 강섬유로 보강된 고강도콘크리트를 대상으로 노치를 가진 휨시험편을 제작하여 3점 재하실험을 실시하고, 그것으로부터 $J_{IC}$와 선형파괴역학 파라메터인 $K_{IC}$와 $G_{IC}$를 얻고 각각을 비교 고찰하였다. 그 결과, 강섬유보강 콘크리트의 파괴인성을 평가하기 위해서는 $J_{IC}$가 $K_{IC}$나 $G_{IC}$보다 더 효과적임을 알 수 있었다. 또한 강섬유 혼입률 0.5% 이하에서는 고강도콘크리트의 인성의 증진효과가 거의 없었으나, 섬유혼입률 1.0% 이상에서는 $J_{IC}$가 뚜렸한 증가를 보이고 있어 콘크리트의 개선된 인성특성을 잘 나타내고 있었으며. $K_{IC}$나 $G_{IC}$는 그렇지 못하였다. 그러나, $J_{IC}$의 정량화에 이용하는 공시체의 크기는 $J_{IC}$의 계산에 필요한 최대강도점에서 포텐셜에너지의 변동이 적고 시험편의 취급도 간편한 공시체의 선택이 필요하며, $J_{IC}$ 의 실험적 평가에 의해서 얻어지는 결과는 최대하중점에서 얻어짐으로 인하여 최대하중점의 선정에 아주 크게 좌우되는 문제점을 가지고 있다. 따라서, 강섬유 보강 콘크리트와 같은 비균질(非均質) 재료(材料)의 경우에는 균열의 진전과정(進展過程)이 불규칙적이므로 균열 발생점을 바르게 찾아내는 측정기술(測定技術)과 정도상(程度上)외 문제점을 포함하여, 파괴인성에 대한 좀 더 바람직한 평가방법 등이 이루어져야 할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.31-36
• /
• 1996

Various strength characteristics of recycled concretes containing different contents of recycled aggregates from waste concretes were compared with one another. Five different contents. 0%, 50%, 60%, 70% and 80%, of recycled concrete were used for this study. Study results showed that the compressive strength, flexural strength, tensile strength, elastic modulus and fracture toughness varied with contents of recycled aggregates. Target strength of the recycled concrete could be difined by nonparametric regression model as a funcion of content of recycled aggregate in the mix.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.77-83
• /
• 1996

This study evaluated mechanical characteristics of polymer concrete produced using waste lime stone aggregate. Study results showed that compressive strength, flexural strength, split tensile strength and fracture toughness were very high. Therefore, it was concluded that waste lime stone could be used as aggregate in polymer concrete production through appropriate processing.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.261-275
• /
• 2016

Effect of silica fume on fresh properties, compressive strength at 28 days and fracture behavior of fly ash concrete composite were studied in this paper. Test results indicated that the fluidity and flowability of fly ash concrete composites decreased and fly ash concrete composite are more cohesive and appear to be sticky with the addition of silica fume. Addition of silica fume was very effective in improving the compressive strength at 28 days of fly ash concrete composite, and the compressive strength of fly ash concrete composite has a trend of increase with the increase of silica fume content. Results also indicated that all the fracture parameters of effective crack length, fracture toughness, fracture energy, the critical crack opening displacement and the maximum crack opening displacement of fly ash concrete composite decreased with the addition of silica fume. When the content of silica fume increased from 3% to 12%, these fracture parameters decreased gradually with the increase of silica fume content. Furthermore, silica fume had great effect on the relational curves of the three-point bending beam specimen. As the silica fume content increased from 3% to 12%, the areas surrounded by the three relational curves and the axes were becoming smaller and smaller, which indicated that the capability of concrete composite containing fly ash to resist crack propagation was becoming weaker and weaker.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.151-158
• /
• 1994

본 연구에서는 수경성 시멘트 경화체의 구조적 결함인 휨강도를 향상시키시 위해 보통 포틀랜드 시멘트비를 0.1로 하여 혼합수량을 줄이고 수용성 고분자 물질인 Hydroxy Propy Methyl Cellulose(HPMC)를 첨가하여 시멘트입자의 윤활작용에 따른 균일한 분산효과와 결합효과를 얻도록 하였으며, twin roll mill로 혼련 성형하여 치밀하고 균일한 경화제 시편을 제조하였다. 이러한 고강도 시멘트 경화체의 휨강도는 약 96MPa, 탄성계수는 60GPa로 우수한 특성을 나타내었다. 고강도 시멘트의 고강도화 기구는 100${\mu}m$ 이상의 큰 기공제거 및 균열성장경로인 모세관 기공의 감소, 미수화 시멘트의 증가로 인한 탄성계수의 증가와 crack toughening(입자 가교, 고분자 섬유 가교, frictional interlocking)에 의한 파괴 인성의 향상 때문인 것으로 판단된다.

• Advances in concrete construction
• /
• 제13권1호
• /
• pp.83-99
• /
• 2022

The two, NBD and SCB tests using gypsum circular discs each containing a single notch have been experimentally accomplished in a rock mechanics laboratory. These specimens have also been numerically modelled by a two-dimensional particle flow which is based on Discrete Element Method (DEM). Each testing specimen had a thickness of 5 cm with 10 cm in diameter. The specimens' lengths varied as 2, 3, and 4 cm; and the specimens' notch angles varied as 0°, 45° and 90°. Similar semi-circular gypsum specimens were also prepared each contained one edge notch with angles 0° or 45°. The uniaxial testing machine was used to perform the experimental tests for both NBD and SCB gypsum specimens. At the same time, the numerical simulation of these tests were performed by PFC2D. The experimental results showed that the failure mechanism of rocks is mainly affected by the orientations of joints with respect to the loading directions. The failure mechanism and fracturing patterns of the gypsum specimens are directly related to the final failure loading. It has been shown that the number of induced tensile cracks showing the specimens' tensile behavior, and increases by decreasing the length and angle of joints. It should be noted that the fracture toughness of rocks' specimens obtained by NBD tests was higher than that of the SCB tests. The fracture toughness of rocks usually increases with the increasing of joints' angles but increasing the joints' lengths do not change the fracture toughness. The numerical solutions and the experimental results for both NDB and SCB tests give nearly similar fracture patterns during the loading process.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.357-367
• /
• 2016

This paper illustrates an experimental study on a self compacting polymer concrete called isobeton made of polyurethane foam and expanded clay. Several experiments were conducted to characterize the physic-mechanical properties of the considered material. Application of the Linear Elastic Fracture Mechanics (LEFM) and determining the toughness of two isobetons based on Belgian and Italian clay, was conducted to determine the stress intensity factor $K_{IC}$ and the rate of releasing energy $G_{IC}$. The material considered was tested under static and dynamic loadings for two different samples with $10{\times}10{\times}40$ and $10{\times}15{\times}40cm$ dimensions. The result obtained by the application of the Linear Elastic Fracture Mechanics (LEFM) shows that is optimistic and fulfilled the physic-mechanical requirement of the study.

• 산업기술연구
• /
• 제15권
• /
• pp.77-82
• /
• 1995

The experimental study is conducted to analyze the characteristics of concrete included silica fume. The workability of concrete is controled by the ratio of mixture, such as superplastcizer, based on the constant rates of sand and cement. It is concluded that the strength and the frectu Toughness of concrete with silica fume are very improved.

• Structural Engineering and Mechanics
• /
• 제25권5호
• /
• pp.565-576
• /
• 2007

The article describes a technique for the measurement of the level of complexity of fracture surfaces by the method of vertical sections, and a performed statistical analysis of the effect of profile lines on the fractographic and fractal parameters of fractures, i.e. the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$, (as defined by the cycloid method), as well as the fractal dimension, $D_C$, (as determined by the chord method), and the fractal dimension, $D_{BC}$, (as determined by the box method). The above-mentioned parameters were determined for fracture surfaces of basalt and gravel concretes, respectively, which had previously been subjected to fracture toughness tests. The concretes were made from mixtures of a water/cement ratio ranging from 0.41 to 0.61 and with a variable fraction of coarse aggregate to fine aggregate, $C_{agg.}/F_{agg.}$, in the range from 1.5 to 3.5. Basalt and gravel aggregate of a fraction to maximum 16 mm were used to the tests. Based on the performed analysis it has been established that the necessary number of concrete fracture profile lines, which assures the reliability of obtained testing results, should amount to 12.