Fracture behavior of fly ash concrete containing silica fume |
Zhang, Peng
(School of Water Conservancy and Environment Engineering, Zhengzhou University)
Gao, Ji-Xiang (School of Water Conservancy and Environment Engineering, Zhengzhou University) Dai, Xiao-Bing (School of Water Conservancy and Environment Engineering, Zhengzhou University) Zhang, Tian-Hang (School of Water Conservancy and Environment Engineering, Zhengzhou University) Wang, Juan (School of Water Conservancy and Environment Engineering, Zhengzhou University) |
1 | Ahmaruzzaman, M. (2010), "A review on the utilization of fly ash", Prog. Energy Combust. Sci., 36(3), 327-363. DOI |
2 | Bagheri, A., Zanganeh, H., Alizadeh, H., Shakerinia, M. and Marian, M.A.S. (2013), "Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash", Constr. Build. Mater., 47, 1402-1408. DOI |
3 | Barbhuiya, S.A., Gbagbo, J.K., Russell, M.I. and Basheer, P.A.M. (2009), "Properties of fly ash concrete modified with hydrated lime and silica fume", Constr. Build. Mater., 23, 3233-3239. DOI |
4 | Blanco, F., Garcia, M.P., Ayala, J., Mayoral, G. and Garcia, M.A. (2006), "The effect of mechanically and chemically activated fly ashes on mortar properties", Fuel, 85, 2018-2026. DOI |
5 | Dilbas, H., Simsek, M. and Cakir, O. (2014), "An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume", Constr. Build. Mater., 61, 50-59. DOI |
6 | Gao, D., Wang, Z., Qian, W. and Zhao, G. (2006), "Fracture energy and crack opening displacement of steel fiber reinforced high strength concrete", J. Chin. Ceram. Soc., 34(2), 192-198. |
7 | Gao, D.Y. and Zhang, T.Y. (2007), "Fracture characteristics of steel fiber reinforced high strength concrete under three-point bending", J. Chin. Ceram. Soc., 35(12), 1630-1635. |
8 | Golewski, G.L. and Sadowski, T. (2014), "An analysis of shear fracture toughness KIIc and microstructure in concretes containing fly-ash", Constr. Build. Mater., 51, 207-214. DOI |
9 | Joshua, M., John, S. and Nilanjan, M. (2007), "Experimental testing to determine concrete fracture energy using simple laboratory test setup", ACI Mater. J., 104(6), 575-584. |
10 | Lam, L., Wong, Y.L. and Poon, C.S. (1998), "Effect of fly ash and silica fume on compressive and fracture behaviors of concrete", Cement Concrete Res., 28(2), 271-283. DOI |
11 | Li, Q., Sun, Z.H. and Zhang, H.Y. (2011), "Experiment about effect of fly ash and silicon fume on the strength of concrete", Concrete, 33(5), 77-79. (in Chinese) |
12 | Memon, F.A., Nuruddin, M.F. and Shafiq, N. (2013), "Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete", Int. J. Min. Met. Mater., 20(2), 205-213. DOI |
13 | National Standard of the People's Republic of China (2005), "Test methods of cement and concrete for highway engineering", JTJ E30-2005, China Communications Press, Beijing. (in Chinese) |
14 | Koksal, F., Altun, F., Yigit, L. and Sahin, Y. (2008), "Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes", Constr. Build. Mater., 22(8), 1874-1880. DOI |
15 | Malhotra, V.M., Zhang, M.H., Read, P.H. and Ryell, J. (2000), "Long-term mechanical properties and durability characteristics of high-strength high-performance concrete incorporating supplementary cementing materials under outdoor exposure conditions", ACI Mater. J., 97, 518-525. |
16 |
Piratheepan, J., Gnanendran, C.T. and Arulrajah, A. (2012), "Determination of c and |
17 | RILEM 50-FMC (1985), "Determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18(4), 287-290. DOI |
18 | Sarker, P.K., Haque, R. and Ramgolam, K.V. (2013), "Fracture behaviour of heat cured fly ash based geopolymer concrete", Mater. Des., 44, 580-586. DOI |
19 | Shah, S.P., Swartz, S.E. and Ouyang, C. (1995), Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock, and Other Quasi-Brittle Materials, John Wiley & Sons, New York. |
20 | Swamy, R.N., Ali, A.R.S. and Theodorakopoulos, D.D. (1983), "Early strength fly ash concrete for structural applications", ACI Mater. J., 80, 414-423. |
21 | Tanyildizi, H. (2013), "Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature", Constr. Build. Mater., 47, 1154-1159. DOI |
22 | Xu, S.L. and Reinhardt, H.W. (2000), "A simplified method for determining double-K fracture parameters for three-point tests", Int. J. Fract., 104(2), 181-209. DOI |
23 | Yu, Y.Z., Zhang, Y.M., Guo, G.L., Rao, B. and Zhou, J.C. (1987), "Study on fracture energy GF of concrete", Shuili Xuebao, 18(7), 300-307. |
24 | Zhang, P., Li, Q. and Zhang, H. (2011a), "Combined effect of polypropylene fiber and silica fume on mechanical properties of concrete composite containing fly ash", J. Reinf. Plast. Compos., 30(16), 1851-1860. |
25 | Zhang, P., Li, Q. and Sun, Z. (2011b), "Influence of silica fume and polypropylene fiber on fracture properties of concrete composite containing fly ash", J. Reinf. Plast. Compos., 30(24), 1977-1988. DOI |
26 | Zhang, P. and Li, Q. (2013a), "Effect of silica fume on durability of concrete composites containing fly ash", Sci. Eng. Compos. Mater., 20(1), 57-65. |
27 | Zhang, P. and Li, Q. (2013b), "Durability of high performance concrete composites containing silica fume", Proc. Inst. Mech. Eng. Part L J. Mat. Des. Appl., 227(4), 343-349. |
28 | Zhang, P. and Li, Q. (2013c), "Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume", Compos. Part B: Eng., 45, 1587-1594. DOI |
29 | Zhao, Y.H., Yang, S.T., Han, F. and Chen, J. (2009b), "A model for fracture toughness prediction in compact tension specimen of concrete", Eng. Mech., 26(12), 127-132. |
30 | Zhao, Z.F., Pang, B. and Zhao, Z.G. (2009a), "Fracture behaviors of dam and wet-screening concrete by direct tensile test", Key. Eng. Mat., 400-402, 233-238. DOI |
31 | Zhao, Y.H., Zhang, H. and Dong, W. (2010), "Determination of fracture parameters for non-standard wedge splitting specimen of concrete", Key. Eng. Mat., 452-453, 425-428. DOI |
![]() |