• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.75-82
• /
• 1994

Groundwater in waste landfills can be contarninated by leachates produced from wastes and flow down toward rivers. These accidents are easily discovered in uncontrolled landfill sites. In this study, applications for controlling groundwater pollution and protecting river pollution were studied using installation of cut-off walls around the waste landfill. Analyses for the efficiency and applicability of the cut-off wall were made under environmental, economical anc technical considerations. Cut-off walls were installed at the upgradient and the downgradient. prediction analyses for the hydraulic head distribution over the site were made for concerning with the final cover and without the final cover. Also, the hydraulic head distribution was predicted with well-pumping on both cases, upgradient cut-off wall and downgradient cut-off wall.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.1-12
• /
• 2003

When milling concave corners, cutter load increases momentarily and fluctuates severely due to concentration and uneven distribution of material stock. This abrupt change of cutter load produces undesirable machining results such as wavy machined surface and cutter breakage. An important factor for studying cutter load in 2.5D pocket milling is the instantaneous Radial Depth of Cut (RDC). However, previous work on RDC under different corner-cutting conditions is lacking. In this different corner shapes. In our work, we express RDC mathematically in terms of the instantaneous cutter engage angle which is defined as Cutter Swept Angle (CSA). An analytical approach for modeling CSA is explained. Finally, examples are shown to demonstrate that the proposed CSA modeling method can give an accurate prediction of cutter load pattern at cornering cut.

• 대한공간정보학회지
• /
• 제18권4호
• /
• pp.71-77
• /
• 2010

도로절토사면유지관리시스템은 국도를 따라 위치한 절토사면의 붕괴를 예방하고자 고안된 체계적인 유지관리시스템을 말한다. 안전한 도로 관리를 추구하기 위한 시스템을 수행할 목적으로 한국건설기술연구원은 2006년부터 전국 모든 절토사면에 대한 현황 파악 및 데이터베이스를 구축해 오고 있다. IT 기술 응용의 일환으로 GIS기술과 내비게이션 기술을 이용하여 절토사면관리시스템(SLOPE-Navi.)을 개발하였다. 내비게이션 절토사면 데이터관리시스템을 통하여 이전에 구축된 자료에 대한 점검 및 검증을 수행하여, 28,707개의 절토사면 기초조사 자료 및 정밀조사 자료를 내비게이션 지도 내에 수록하였다. 내비게이션 절토사면 데이터 관리시스템은 체계적이고 효율적인 절토사면 DB 관리 및 운용으로 붕괴 사고 예방 및 대책 수립을 위한 현장관리시스템으로 활용성이 클 것으로 판단된다.

• Physical Therapy Rehabilitation Science
• /
• 제6권4호
• /
• pp.176-181
• /
• 2017

Objective: The timed up and go (TUG) test is method used to determine the functional mobility of persons with stroke. Its reliability, validity, reaction rate, fall prediction, and psychological characteristics concerning ambulation ability have been validated. However, the relationship between TUG performance and community ambulation ability is unclear. The purpose of this study was to investigate whether the TUG performance time could indicate community ambulation levels (CAL) differentially in persons with chronic stroke. Design: Cross-sectional study. Methods: Eighty-seven stroke patients had participated in this study. Based on the self-reporting survey results on the difficulties experienced when walking outdoors, the subjects were divided into the independent community ambulation (ICA) group (n=35) and the dependent community ambulation group (n=52). Based on the area under the curve (AUC), the discrimination validity of the TUG performance time was calculated for classifying CAL. The Binomial Logistic Regression Model was utilized to produce the likelihood ratio of selected TUG cut-off values for the distinguishing of community ambulation ability. Results: The selected TUG cut-off values and the area under the curve were <14.87 seconds (AUC=0.871, 95% confidence interval=0.797-0.945), representing a mid-level accuracy. Concerning the likelihood ratio of the selected TUG cut-off value, it was found that the group with TUG performance times shorter than 14.87 seconds showed a 2.889 times higher probability of ICA than those with a TUG score of 14.87 seconds or longer (p<0.05). Conclusions: The TUG can be viewed as an assessment tool that is capable of classifying CAL.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.643-650
• /
• 2004

In general, slope failures are occurred by the interaction among various factors(slope shape, hydraulic condition, and geologic condition, etc.). In the area where has a heavy rainfall, a great portion of slope failures are caused by seepage increasement with suitable failure condition. Many studies have been performed to find the cause of large-scale failures. In this study, three Cut-Slope failures caused by typhoon 'MAEMI' were investigated to find out factors causing large-scale slope failures. It was confirmed in this research that major reason of slope failures was the weak layer working along with other unstable factor. The large-scaled investigation concerning Cut-Slope will be needed to find out the Weak Layer.

• 화약ㆍ발파
• /
• 제10권2호
• /
• pp.3-7
• /
• 1992

Concerning to Taeku city subway construction project(1-4 site), the original design was adapted NATM Tunnel method to the 8 meter thickness of overburden. Surveyor checked sity and design material and finally decided to change into Open Cut method because overburden is not only below 1 1/2 times thickness of comparate Tunnel width but there is no traffic conjunction in job site.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• 터널과지하공간
• /
• 제16권6호
• /
• pp.451-466
• /
• 2006

DOM 시추코어에서 측정된 불연속면의 위치 및 방향성 자료를 이용하여 현장암반의 구조적 특성을 고려한 사면거동 해석이 가능하였다. 3차원 공간에서 설정된 절리들의 위치에 의거하여 붕락 현상이 발생된 개착사면의 추가적인 파괴양상을 예측하였으며, 개별 절리면의 붕락위해 가능성과 개착면 상에서의 trace 위치를 파악하여 세부적인 사면거동 양상을 파악하였다. 개착사면 횡단면에서 개별절리들의 파괴거동 양상과 사면체 블록형성을 대수학적으로 산출하여 사면 붕락심도를 규명하였다. 현장사면에 자동화 계측시스템을 설치하여 사면 거동에 대한 계측자료를 수집하였으며, DOM 시추공 내에 지중경사계를 설치하여 사면거동 양상을 횡단면 해석 결과와 대비시켜 분석하였다. 지중경사계를 이용하여 측정된 개착면의 표면변위 자료에 의거하여 사면 파괴시기를 예측할 수 있는 방법론을 고찰하였으며, 강우가 사면거동에 끼치는 영향성을 분석하였다.

• 한국시스템다이내믹스연구
• /
• 제1권2호
• /
• pp.33-60
• /
• 2000

This study aims to conceptually identify the circular causal-relationship which is structured between downsizing and technological innovation in organization. First, through the literature review concerning downsizing and (technological) innovations, we have outlined the conceptual building blocks and research boundaries in this field. Second, we used system thinking method to accomplish our research purpose. The research findings are as follows. First, the promotion of financial resources by downsizing have trade-off relations that have negative of effects in short terms, but positive effects in long time. Second, workforce reduction by downsizing usually has negative influence on employees. Third, capital reduction by downsizing generates not only the climates of cost-cut but also the fact that although the climates may increase economic performance in short terms, it may interrupt technological innovations in long terms. In conclusion, this theses suggests that the relationship of downsizing and technological innovations have complex causal and feedback structures. Therefore, the results of this thesis propose that the argument or practices of downsizing with partial emphasis is very dangerous. Finally some limitations are also discussed.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2006년도 춘계학술발표회 논문집
• /
• pp.195-203
• /
• 2006

철도지하횡단공사는 횡단구조물 축조시 개착식과 비개착식 공법으로 구별되는데 개착식 공법은 열차의 비운행시간을 고려하여 시공하는 극히 제한적인 공법인데 반하여 비개착식은 열차의 속도 및 운행시간에 제약을 받지 않는 특징을 갖고 있으며 안전하고 신속한 시공의 장점을 갖고 있다. 비개착식 공법 중 Front Jacking 공법은 소구경의 강관을 압입하여 구조물과의 마찰력과 토압을 최소화시킨 후 현장에서 제작한 전단면 Precast Box 선단부에 PC강연선과 유압Jack을 이용하여 박스를 지중에 견인하는 공법으로 시공시 안정성과 열차의 정시성 확보가 유리하여 많이 적용되고 있다. 이 공법은 박스단면의 크기 및 연장, 지반조건에 관계없이 시공가능하며 친환경적인 시공을 할 수 있다. 본 고에서는 Front Jacking 공법이 적용된 대전동서관통대로의 철도횡단 시공사례를 소개하고자 한다.