• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.715-718
• /
• 2002

As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.1
• /
• pp.44-54
• /
• 2001

This paper describes the antenna alignment method of the tracking antenna system for LEO satellite. The purpose of the antenna alignment is to reduce the angular error due to the structural alignment and the monopulse null point alignment error. The angular error of 3 axis tracking system is the key performance parameter that should be minimized to accurately track satellite movement. The angular error is analyzed via a simulation and boresight measurement. The simulation is done with formulas to be derived from vector concept for 3-axis movement. The formulas of the structural alignment are verified by comparing the formula result with the field measurement. Also, the angular error due to monopulse null shift is obtained via boresight measurement. Based on the analyzed and measured results, the antenna alignment was performed and was verified via tracking test of operating LEO satellite.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.485-492
• /
• 2012

As the shape of stamped part is complicated and as the trend toward light weight continues, the higher level of difficulty is required in making stamping die because of inevitably poor formability. The poor formability can be improved if the material flow during the stamping is carefully controlled. Application of drawbead became commonsense used to retard metal flow of blank into the die cavity at the region where wrinkle is expected. In the study, the concept of beadless stamping process is proposed and the method how to realize the beadless stamping process is presented. The validity of the proposed method is confirmed by the application of the real auto part.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.351-355
• /
• 1990

In this paper, we proposed a software strategy of PWM inverter, and could indentify its realization by simulation and experiment. A basic concept of software is that the PWM pattern of inverter decided by the flux vector of induction motor tracing circle locus. The algorithm is charterized as a simplification of control circuit, abilitry on expressing control quintity as quantization and conpensation of quantization error and a switching pattern is decided by addition and substraction and high performance control is realized by 8 bits microprocessor.

• Asia pacific journal of information systems
• /
• v.5 no.1
• /
• pp.36-51
• /
• 1995

본 논문에서는 비구조적인 의사결정문제를 효과적으로 해결하기 위하여 감독학습 인공신경망 모형과 비감독학습 인공신경망 모형을 결합한 하이브리드 인공신경망 모형인 HYNEN(HYbrid NEural Network) 모형을 제안한다. HYNEN모형은 주어진 자료를 클러스터화 하는 CNN(Clustering Neural Network)과 최종적인 출력을 제공하는 ONN(Output Neural Network)의 2단계로 구성되어 있다. 먼저 CNN에서는 주어진 자료로부터 적정한 퍼지규칙을 찾기 위하여 클러스터를 구성한다. 그리고 이러한 클러스터를 지식베이스로하여 ONN에서 최종적인 의사결정을 한다. CNN에서는 SOFM(Self Organizing Feature Map)과 LVQ(Learning Vector Quantization)를 클러스터를 만든 후 역전파학습 인공신경망 모형으로 이를 학습한다. ONN에서는 역전파학습 인공신경망 모형을 이용하여 각 클러스터의 내용을 학습한다. 제안된 HYNEN 모형을 우리나라 기업의 도산자료에 적용하여 그 결과를 다변량 판별분석법(MDA:Multivariate Discriminant Analysis)과 ACLS(Analog Concept Learning System) 퍼지 ARTMAP 그리고 기존의 역전파학습 인공신경망에 의한 실험결과와 비교하였다.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.17-22
• /
• 2005

As one of validation tool for attitude determination system, we have used various constraints using priori information which is known through base vector set up. However these conventional constraints cannot guarantee validity in terms of final solutions such as Euler angle. So we suggest attitude boundary concept to verify the final attitude solution on the flying airplane, it is based on the combination of velocity based attitude estimation technique and ambiguity resolution. we can say it can check invalid solution effectively at just one epoch without repeatability test of resolved cycle ambiguity. In this paper we show that the suggested constraint can effectively reject incorrectly resolved cycle ambiguity the conventional constraints have missed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.82-86
• /
• 2014

Modern Air Traffic Management has been shifted from the conventional vector- based clearances to trajectory based operations (TBO) concept which utilizes four-dimensional trajectory based on the internationally interoperable information using Globally Unique Flight Identifier (GUFI). This study reviews the development for TBO-related standards and Flight Information Exchange Model (FIXM), which has been discussed by the ICAO Air Traffic Management Requirements and Performance Panel (ATMRPP). In addition, plans for the next step with TBO and the Republic of Korea's participation on the Mini-Global Demonstration were also introduced.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.831-841
• /
• 2007

This work is to extend the elliptic operator, which has been already adopted in turbulent stress model, to fully developed turbulent buoyant channel flows with changing the orientation of the buoyancy vector to be perpendicular to the channel walls. The turbulent heat flux models based on the elliptic concept are employed and closely linked to the elliptic blending second moment closure which is used for the prediction of Reynolds stresses. In order to reflect the stable or unstable stratification conditions, the present model introduces the gradient Richardson number into the thermal to mechanical time scale ratio and model coefficients. The present model has been applied for the computation of stably and unstably stratified turbulent channel flows and the prediction results are directly compared to the DNS data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.101-104
• /
• 2001

Many applications are developed on variety type of mobile terminal with mobile tole-communication improvement. We suggest that we offer more improve multimedia environment on that development. So we design SWF player which supports Macromedia SWF file format. It is application that animation and graphic module are independent of system. In addition to, we implement SWF player on mobile communication environment. for the purpose of it, we adapt AKL concept, which is designed for the consistent interface on heterogeneous operating system environment.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2216-2218
• /
• 2000

This paper deals with finite element eigenvalue problem using electric field intensity to extract the even and odd impedance for a coupled-line waveguide structure. Calculations for the even-and-odd impedance of a coupled line waveguide structure are achieved based on the relative impedance concept for a waveguide with electric and magnetic wall containes.