• 제목/요약/키워드: concept description method

검색결과 75건 처리시간 0.025초

2015 개정 교육과정에 따른 초등 과학 검정 교과서 내용 다양성 분석 - '물체의 무게' 단원을 중심으로 - (Content Diversity Analysis of Elementary Science Authorized Textbooks according to the 2015 Revised Curriculum: Focusing on the "Weight of an Object" Unit)

  • 신정윤;박상우;정현지;홍미나;김현재
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제41권2호
    • /
    • pp.307-324
    • /
    • 2022
  • 이 연구에서는 2015 개정 교육과정에 따른 초등 과학 국정 교과서와 동 교육과정에 따라 2022년에 출판된 초등 과학과 검정 교과서 7종의 '물체의 무게' 단원에 진술된 과학 개념의 서술과 탐구활동 내용의 특징을 비교하여 초등 과학 검정 교과서의 내용 다양성을 분석해 보았다. 이를 위해 각 교과서의 설명텍스트에서 개념 서술 내용의 흐름, 개념 서술 과정에서의 특이점을 분석하였고, 언어네트워크 분석 방법으로 노드와 링크 수, 연결중심성이 높은 중심 단어를 분석 하였다. 또한 교과서에 제시된 탐구활동에서 탐구활동 유형, 탐구과정기능 및 탐구 활동 내용을 분석하였다. 연구 결과, 검정 교과서에서는 과학 개념의 서술이나 탐구활동 내용 구성에서 다양성이 잘 드러나지 않았다. 하위 개념의 포함 여부, 중심 단어 등이 교과서별로 유사하였다. 탐구활동을 비교하였을 때에도 탐구활동 내용과 탐구 유형, 탐구과정기능이 유사하였다. 특히 이전 교과서에서 제시되지 않았던 새로운 탐구활동 주제나 실험 방법을 도입한 경우는 없었다. 하지만 동일한 교육과정을 바탕으로 개발되었음에도 불구하고 검정 교과서 체제의 장점을 살릴 수 있는 노력들이 일부 시도되고 있었다. 핵심 내용을 설명하기 위한 하위 개념의 배치 순서가 교과서마다 달라 개념을 설명하는 과정이 몇 가지 유형으로 구분되었고, 탐구활동의 내용은 동일하였지만 기존 실험에서의 어려움을 개선하고 보완하기 위해 탐구 활동 준비물이 교과서별로 서로 다르게 나타나기도 하였다. 이를 바탕으로 검정 교과서의 장점을 살릴 수 있는 시도가 계속되어야 할 것이다.

국내 학술지에 게재된 간호개념개발 연구의 동향 (Trends of Concept Development in Nursing Published in Korean Journals)

  • 이수미;이진혜;황유경;고일선
    • 대한간호학회지
    • /
    • 제50권2호
    • /
    • pp.178-190
    • /
    • 2020
  • Purpose: The purpose of this study was to identify trends of nursing concept development in Korean journal papers to improve accurate understanding of nursing concepts. Methods: A systematic review of 216 concept development articles published from 1970 to 2018 that met the inclusion criteria was conducted using Research Information Sharing Service (RISS) databases. Results: The most common method of concept development was Walker and Avant's concept analysis method, identified in 139 (64.3%) of the 216 studies, followed by 48 examples of hybrid models (22.2%) and 15 examples of evolutionary methods (6.9%). Chinn and Kramer's method, Norris's clarification, Wilson's method, and others were also used. The concepts of "spirituality" and "fatigue" were most frequently analyzed. Among the 139 studies that used Walker and Avant's concept analysis method, 127 studies (91.4%) applied all the recommended steps; the others applied the recommended steps partially, omitting description of model cases/additional cases, antecedents/consequences, and empirical indicators. Among the studies using the hybrid model, among two (5.7%) did not describe attributes, three (8.5%) did not provide definitions, and 16 (45.7%) did not present empirical indicators in the final stage. Conclusion: Among concept development studies published in Korean journals, Walker and Avant's concept analysis method is most commonly used. In case of most studies using Walker and Avant's method a suitable concept analysis process is applied, but in case of other studies using the other concept development method, a suitable concept analysis process is not applied. Therefore, a suitable concept analysis process must be applied for concept development in nursing research.

환자 존중 개념 개발 (Concept Development Using Hybrid Model for the Concept, Patient Respect)

  • 유명란
    • 성인간호학회지
    • /
    • 제15권1호
    • /
    • pp.137-145
    • /
    • 2003
  • Purpose: This research is a descriptive study to explore "patient respect" in nursing. Respect was analyzed as a concept in the domain of the patient. The Hybrid Model suggested by Schwartz-Barcott and Kim was used in this study. Method: For the theoretical phase, nursing and other literature were reviewed to analyze attributes and develop a working definition of the concept, respect. For the fieldwork phase, four subjects in two general hospitals in Seoul participated. With the participants' permission, the data was collected between January and April, 2002, through in-depth interview and participant observation. The data analysis progressed at the same time as the fieldwork. Data analysis proceeded according to the analysis method of Strauss and Corbin. Result: The final attributes of patient respect are suggested by consideration, recognition, cordial treatment, concern, honesty, acceptance. The final definition of patient respect as a concept in the domain the of patient is suggested by "Patient respect is that the patient is recognized as an individual with worth and is accepted, and considered to be that kind of an individual person. In addition, the patient is recognized to be an independent person and is treated with concern and honesty." Conclusion: The results of the analyses is helpful in integrating into a comprehensive description of the concept, Patient Respect.

  • PDF

시맨틱 웹 언어를 이용한 서비스 명세(Service Description) 확장 (Extension of Service Description in a Semantic Web Language)

  • 김홍기;김학래;이강찬;전종홍
    • 한국전자거래학회지
    • /
    • 제8권4호
    • /
    • pp.113-128
    • /
    • 2003
  • 시맨틱 웹 기반의 서비스의 기술(혹은 명세 )은 지능적 서비스 중개 (matchmaking)가 가능할 수 있도록 언어적 표현의 유연성 (flexibility)과 표현력 (expressiveness)을 높일 수 있는 방향으로 진행된다. 유연성은 서비스 기술의 상세한 정도와 표현의 구조적 차이를 컴퓨터가 처리하는 방식과 관련이 있고, 표현력은 서비스를 의미적 차원으로(혹은 온톨로지에서 표현하는 개념의 수준으로) 보다 풍부하게 표현하는 것을 의미한다. 최근 전자상거래의 표준으로 자리잡고 있는 UDDI와 ebXML의 단점은 서비스 명세에 있어서 유연성과 표현력이 떨어진다는 점이다. 본 연구에서는 DAML-S를 중심으로 시맨틱 웹 기반의 서비스 명세의 확장에 필요한 언어적 구성 요소들을 분석한다. 그리고 이를 지능형 웹 서비스 구현에 적용시키기 위한 방법을 가상적 경매 사이트인 테스트옥션 닷컴 (testAuction.com)을 구현한다. 마지막으로 현재 온톨로지를 이용한 서비스 기술 프레임웍에 대한 이론적 고려사항들에 대하여도 살펴본다.

  • PDF

Validation of 3D crack propagation in plain concrete -Part II: Computational modeling and predictions of the PCT3D test

  • Gasser, T.Christian
    • Computers and Concrete
    • /
    • 제4권1호
    • /
    • pp.67-82
    • /
    • 2007
  • The discrete crack-concept is applied to study the 3D propagation of tensile-dominated failure in plain concrete. To this end the Partition of Unity Finite Element Method (PUFEM) is utilized and the strong discontinuity approach is followed. A consistent linearized implementation of the PUFEM is combined with a predictor-corrector algorithm to track the crack path, which leads to a robust numerical description of concrete cracking. The proposed concept is applied to study concrete failure during the PCT3D test and the predicted numerical results are compared to experimental data. The proposed numerical concept provides a clear interface for constitutive models and allows an investigation of their impact on concrete cracking under 3D conditions, which is of significant scientific interests to interpret results from 3D experiments.

EDMS와 기록물의 라이프사이클 (EDMS and Life-cycle of Records)

  • 김익한
    • 기록학연구
    • /
    • 제5호
    • /
    • pp.3-37
    • /
    • 2002
  • Today the market of EDMS is esteemed more than 100 billions won. It signifies a comming of age of electronic records. The traditional archival theories which are based on the paper records are confronted with a new challenge. In some leading countries of archival studies reorientation of archives management has been tried by a number of distinguished specialists such as Bearman and Hedstrom since 10 years. As a consequence new paradigm of archival theories has been developed. Also in Korea this new paradigm has been introduced by some expert such as Lee, Sang-Min, Sul, Moon-won, Lee, Seung-Eok. However their arguments are too general to offer a concrete clue for new paradigm. Faced by new age of electronic records, it's important to start a discussion for the reasonable methods of electronic records management at once. The most drastically changed part of record management by the electronic technique is the life-cycle of records. The commonly practiced three-stage life-cycle is to be reduced to the two-stage life-cycle, and the concept of the spatial movement of records is to be changed. It can be also pointed that the public emerges as user from the early creating stage of records beyond time and space. Thus is can be said that the method of the management features dynamic and cohesive. The method of appraisal must be also changed and reproduced, so that it can reflect the various levels considering dynamics of the electronic records. Supposedly it will be a core factor that causes the change of methodology in records management with the change of life-cycle theory. It must be noted that various subjects would be involved in the work of classification and description over time and space and that feedback between them is of important. Description also tends to be made at the crating stage of records and structured dynamically. It results from the change of life-cycle and the introduction of the concept of continuum. Such trend allows us to start discussions on the assumption that description of both creator and archival professionals act together an important role. Of course, it is linked with the methodology in which most descriptions are made automatically at the early drafting stage of the structure. The meat date is formed on the assumption that there should be feedback between areas of automatic description, description of creators and archival professionals. The most important thing in description is to develop a suitable way how it is structured. An alternative must be offered for managing data set. As iweb that is being operated by Myongji university shows, records created in daily business are managed not as electronic records but as date base. This is because they exist outside the repository in the EDMS system. Since data set often has various sources, an alternative for classification needs to be developed. It is now likely that database is filed according to the created year to be transferred automatically to the repository. Over a long-term the total management of database, electronic records and electronic information will be a topic. A right direction of new paradigm will be found for both iweb and E-government, when practice and studies of theories are combined and interacted.

Non-Uniform Rational B-Splines의 Blending Function 분석에 대한 연구 (A Study on Analyzing the Blending Function of NURBS)

  • 김정욱;김희중;정재현
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
    • /
    • pp.163-167
    • /
    • 2001
  • The paper introduce the basic concept for the variable graph description of blending functions in NURBS using some control method; the control points, knot vectors and weight points in 3D space.

  • PDF

새로운 N-ary 관계 디자인 기반의 온톨로지 모델을 이용한 문장의미결정 (A Semantic Similarity Decision Using Ontology Model Base On New N-ary Relation Design)

  • 김수경;안기홍;최호진
    • 정보관리학회지
    • /
    • 제25권4호
    • /
    • pp.43-66
    • /
    • 2008
  • 시맨틱 웹 기술의 제안과 더불어 다양한 분야에 온톨로지의 특징을 적용한 기술 개발 연구가 많이 진행되고 있다. 인간이 소유한 개념을 가장 적절하게 표현하기 위해 현재에도 OWL, RDF와 같은 온톨로지 언어의 표현력을 확장시키기 위해 N-ary 관계나 모델-이론 의미론과 같은 개발이 진행되고있다. 본 연구는 한국어에 있어 문장이 내포하는 의미를 정확하게 결정하기 위해 문장의 구조에 따라 달라지는 단어의 의미를 연관할 수 있도록 N-ary 관계와 디자인 기반이 적용된 온톨로지의 지식 표현 방법을 연구하였다. 특히 다양한 지식 영역을 포함하는 다의어(polysemy)와 동의어(synonym)의 특징을 갖는 단어에 있어 각 지식 영역으로 분류되어 각 지식 영역에 있는 유사한 의미를 가진 단어로 확장되어 유사한 의미를 가진 단어가 포함된 문장의 경우 까지도 확장할 수 있는 표현 방법을 연구하였다. 연구의 검증을 위해 사용자가 입력한 병증 문장을 제안된 방법에 따라 구축된 온톨로지내 지식 관계와 의미 결정을 위한 추론 표현 방법을 이용하여 병증의 의미를 결정하고 그에 따른 진단을 제공하는 실험 시스템을 구현하였고, 한국어가 갖고 있는 문장의 유의성, 모호성, 복합성 의 특징을 보유한 증상문들의 실험 결과 의미 결정과 유사 의미 확장에 있어 우수한 성능을 보여주었다.

한국목록규칙에서 판과 쇄의 서지요소 기술형식 개선안 연구 (A Study on the Improvement of the Descriptive Form of the Edition and Impression in the Korean Cataloguing Rule)

  • 이명규
    • 한국도서관정보학회지
    • /
    • 제52권3호
    • /
    • pp.217-238
    • /
    • 2021
  • 이 연구는 현행의 목록규칙에서 판과 쇄차표시, 발행년 표시 등의 서지요소를 기술하는 문제점을 파악해보고, 한국목록규칙과 한국문헌자동화목록형식의 개선안을 제시하는 것이 목적이다. 도서관에서 정보기술 환경의 변화에 따라, 이용자에게 제공할 수 있는 목록의 수준과 범위를 조정해야 할 것이다. 자료가 다양해지고, 메타데이터의 기술방식이 발전함에 따라 서지요소의 개발과 기술방식의 변경이 기존 표준화의 틀을 바꾸고 있다. 연구방법으로 판과 쇄의 용어 개념을 살펴보고, 우리나라의 기존 목록규칙을 대상으로 이 표기에 대한 변천과정을 살펴보며, KCR4를 중심으로 목록 예시를 통해 추가하거나 수정해야할 서지기술 방법을 제시하고, 이를 KORMARC 작성에 반영하는 형식을 살펴보고자 한다. 여기에서는 단행본 도서의 기술형식으로만 한정하고자 한다. 도서관목록의 서지기술요소는 기술대상자료의 서지요소와 완전히 일치해야 한다. 이에 목록규칙의 개선(안)은 먼저, 목록규칙의 판사항에 판표시와 쇄차표시를 기술하도록 한다. 그리고 발행년의 기술은 해당 판의 최초발행년 기술이 아니라 최신발행년을 기술하게 한다. 발행년의 기술범위는 발행월까지 확대한다. 둘째, KORMARC형식에서 판사항에서 쇄차표시는 250필드 식별기호에 부여하며, 쇄차표시는 2쇄부터 숫자로 기술한다. 발행년월의 표시는 260필드의 한 식별기호에는 발행년을 적고 다른 식별기호에는 발행월을 기술한다. 발행년월은 해당출판물의 표제면과 판권기에 실려있는 최신년월이 기술된다.

NURBS 곡면과 면적 사상법을 이용한 압출 금형곡면의 표현 방법에 관한 연구 (Investigation on the Description Method of Extrusion Die Surface using NURBS Surface and Area Mapping Method)

  • 유동진;권혁홍;임종훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2003년도 춘계학술대회논문집
    • /
    • pp.343-346
    • /
    • 2003
  • In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the marring concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile is determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.

  • PDF